Manufacturers:Henry Company Canada
Manufacturers:Henry Company Canada
Revision as of 15:36, 3 November 2021 by James Klassen (talk | contribs) (→Liquid Membrane Flashing)
Division C - Accepted Materials
Henry Company Canada
Associate Member (Manufacturer)
The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise. |
Manufacturer: Henry Company Canada
|
- Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category
- Materials shown with "TA" after the name have been used in wind-resistant Tested Assemblies. See also Securing the Roof Assembly and links to MARS, PARS and AARS material tables.
Waterproofing System Materials
Roofs
SBS Membranes
- Base Membranes
- Modified Plus G100 p/p
- Modified Plus G100 p/s (TA)
- Modified Plus G100 s/s
- Modified Plus NP180 p/p
- Modified Plus NP180 p/s
- Modified Plus NP180 s/s
- Modified Plus NP180 Tack (TA)
- ModifiedPLUS G100 Tack sheet
- Cap Membranes
- ModifiedPLUS NP180g M4
- ModifiedPLUS NP180g T4
- ModifiedPLUS NP250g M4
- ModifiedPLUS NP250g T4
- ModifiedPLUS NP250g T5
Hot Fluid-applied Rubberized Asphalt Roofing Systems
Liquid Membrane Flashing
Two-part Reinforced Liquid Membrane Flashing
Grade-level Waterproofing
Waterproofing Membrane Systems
- Hot Fluid-applied Rubberized Asphalt Systems
- Hot Rubberized Asphalt Installation Guidelines
Liquid Membrane Flashing
Two-part Reinforced Liquid Membrane Flashing
Water-shedding System Materials
Eave Protection & Underlayment (Shakes & Shingles)
Eave Protection & Underlayment (ASM)
© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.