Manufacturers:Precision Metals Ltd.

Jump to: navigation, search

Manufacturers:Precision Metals Ltd.

Revision as of 21:42, 21 January 2025 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)



Division C - Accepted Materials


Precision Metals Ltd.
Associate Member (Manufacturer)

Materials Listed by Category


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website
https://precisionmetals.ca/
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
Canada
Country of Manufacture
Canada
Year First Installed
pre-2017
BC: pre-2017
Canada: pre-2017
Foreign: N/A

Drains

Deck Drains (not for roofs*)
Spun Aluminum Deck Drain
Spun Copper Deck Drain

Penetration Flashings

Galvanized Penetration Flashings
Hot-welded B-vent (Flat)
Gooseneck Vent
PRT Bath/Dryer/Stove Vent
Aluminium and Copper Penetration Flashings
Aluminum Stack (Pipe flashing)
Aluminum Stack Cap (Standard)
Aluminum Stack Cap (Anti-vandal)

* Refer to roof Standards for restrictions on drain types.


Home

© RCABC 2025
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.