ASM Eave and Rake Edges (Snap-Lock Seams)

Jump to: navigation, search

ASM Eave and Rake Edges (Snap-Lock Seams)

Revision as of 22:42, 21 December 2015 by James Klassen (talk | contribs)

8.1.4.4.1.jpg


1 WORK INCLUDED

(1) Ice Dam Protection: Accepted self-adhered modified bituminous membrane.

(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.

(3) Metal Panel Clip: Installed to metal roof panel manufacturer’s printed instructions.

(4) Architectural Metal Roof Panel

(5) Continuous Metal Cleat

(6) Metal Fascia Flashing

(7) Edge Metal Flashing

(8) Preformed Closures

(9) Exposed Fasteners: High-domed gasketed cladding type screws compatible with metal roof panel.

(10) Rake Edge Metal Flashing


2 RELATED WORK BY OTHERS

(A) Acceptable Deck

(B) Fascia Board

NOTE: * Refer to RGC Guarantee Standards for additional requirements.



Back to ASM Application

Back to ASM Construction Details

Back to Construction Details