ASM Eave and Rake Edges (Snap-Lock Seams)

Jump to: navigation, search

ASM Eave and Rake Edges (Snap-Lock Seams)

Revision as of 20:27, 19 August 2016 by James Klassen (talk | contribs)
ASM Details

8.1.4.4.1.jpg

1 WORK INCLUDED

(1) Ice and Water Protection
Accepted self-adhered modified bituminous membrane.
(2) Slip Sheet
Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
(3) Metal Panel Clip
Installed to metal roof panel manufacturer's printed instructions.
(4) Architectural Metal Roof Panel
(5) Continuous Metal Cleat
(6) Metal Fascia Flashing
(7) Edge Metal Flashing (Continuous)
(8) Pre-formed Closures
(9) Exposed Fasteners
High-domed gasketed cladding type screws compatible with metal roof panel.
(10) Rake Edge Metal Flashing

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Fascia Board


NOTE: Refer to RoofStar Guarantee Standards for additional requirements.





Back to ASM Application

Back to ASM Construction Details

Back to Construction Details