Division C - Accepted Materials
Protectobase 180 Film (3.0 mm Base)
by IKO Industries Ltd.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- IKO Industries Ltd.
- Accepted for the RoofStar Guarantee Program
- June 12, 2025
- Accepted for application in
- Roof Waterproofing Systems
- Acceptance Criteria
- The laminated membrane shall conform to RGC ACWP-MOD, "RGC ACCEPTANCE CRITERIA for MANUFACTURED POLYMER-MODIFIED, REINFORCED BITUMINOUS SHEET MEMBRANES Used in Roof Waterproofing and Grade-level Waterproofing Systems"
- Product Summary
- Protectobase 180 Film (3.0mm Base) is a composite of IKO Protectoboard, a mineral fortified asphalt core board that is factory laminated to an SBS modified bitumen base sheet. The bottom surface of the product is our standard Protectoboard finish and the top surface is available in a light micro-perforated film which permits heat fusing of an IKO SBS modified bitumen cap sheet.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- see "Standard for SBS-modified Bitumen Membrane Roof Systems" for specific requirements concerning use and application of this material.
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
