Difference between revisions of "Materials:3-1 SopraSmart Rock"

Jump to: navigation, search

Difference between revisions of "Materials:3-1 SopraSmart Rock"

 
(One intermediate revision by the same user not shown)
Line 9: Line 9:
 
| '''Manufacturer''': [http://soprema.ca/  '''Soprema Inc.''']
 
| '''Manufacturer''': [http://soprema.ca/  '''Soprema Inc.''']
 
;:  
 
;:  
;Accepted for '''''RoofStar Guarantee Program''''': Date TBA
+
;Accepted for the ''RoofStar Guarantee Program'': Date here
;:
+
;Accepted for application in: Roof Waterproofing Systems
;'''Product Summary''': '''Xpress ISO''' overlay board is a polyisocyanurate insulation board laminated with adhesive to a mineral wool fibre insulation made from basalt rock and steel slag with a factory-applied polyester reinforced SBS modified bitumen base sheet on the top surface with a thermofusible plastic film or a sanded surface. The base sheet is offset from the board on two adjacent edges (1" on end and 3 3/8" on side) to provide shiplap, other edges are square. .  '''XPRESS ISO''' can be mechanically fastened with '''SOPRAFIX FASTENERS AND PLATES''' or adhered to the substrate with '''COLTACK''' or '''DUOTACK''' adhesive or hot bitumen.
+
;Product Summary: Formerly known as '''Xpress ISO''', '''3-1 SopraSmart Rock''' is a high performance insulating base sheet panel. It is composed of SBS modified bitumen membrane with a non-woven polyester reinforcement and a surface covered with a thermofusible plastic film. This membrane is factory-laminated on a high density mineral wool (stone wool) support panel and on a polyisocyanurate insulation board (SOPRA-ISO).  
  
:To ensure a secure installation, Xpress ISO is made with the patented DUO-SELVEDGE, a lap unique to Soprema (70% self-adhesive and 30% thermofusible). Its self-adhesive component protects combustible surfaces and its thermofusible properties provide an efficient seal end laps can be aligned then sealed by heat welding a minimum 12" wide membrane reinforcing strip.
+
:(adapted from the Technical Data Sheet)
  
:'''Xpress ISO''' is available in lm x 4.9m (39" x 16') up to 89 mm (3½") thick and lm x 2.4m (39" x 8') from 89 mm to 114 mm (3½" - 4½") thick. The larger boards are folded in two for easy shipping and handling. It can be mechanically fastened in seam with SOPRAFIX FASTENERS and PLATES, bonded with COLTACK or DUOTACK adhesive, or bonded in hot asphalt.
+
;Conditions and Limitations: None
 
 
:'''XPRESS ISO''' is an overlay board and base sheet combined, adding various thermal resistance values to primary insulation used as the overlay and base sheet combined.
 
 
 
:<table cellspacing="0" cellpadding="0" width="70%">
 
  <tr>
 
    <td>MEMBRANE PROPERTIES </td>
 
    <td>TEST METHOD</td>
 
    <td>TYPICAL RESULTS</td>
 
  </tr>
 
  <tr>
 
    <td>Reinforcement</td>
 
    <td></td>
 
    <td>Non-woven Polyester</td>
 
  </tr>
 
  <tr>
 
    <td>Breaking Strength MD/XD)</td>
 
    <td>CAN/CGSB 37.56-M</td>
 
    <td>(kN/m) 17.0/12.5</td>
 
  </tr>
 
  <tr>
 
    <td>Ultimate Elongation</td>
 
    <td>CAN/CGSB 37.56-M</td>
 
    <td>(%) 60/65</td>
 
  </tr>
 
  <tr>
 
    <td>Tear Strength</td>
 
    <td>ASTM D5601</td>
 
    <td>(N) 60</td>
 
  </tr>
 
  <tr>
 
    <td>Cold Bend - Initial</td>
 
    <td>CAN/CGSB 37.56-M</td>
 
    <td>-30&deg;C</td>
 
  </tr>
 
  <tr>
 
    <td>Cold Bend - -90 days @ 70&deg;C</td>
 
    <td>CAN/CGSB 37.56-M</td>
 
    <td>-30&deg;C</td>
 
  </tr>
 
  <tr>
 
    <td></td>
 
    <td></td>
 
    <td></td>
 
  </tr>
 
  <tr>
 
    <td>MINERAL WOOL PROPERTIES </td>
 
    <td>TEST METHOD</td>
 
    <td>TYPICAL RESULTS</td>
 
  </tr>
 
  <tr>
 
    <td>Thermal Resistance</td>
 
    <td></td>
 
    <td>R-4/inch (25mm) thickness</td>
 
  </tr>
 
  <tr>
 
    <td>Surface Burning Characteristics</td>
 
    <td>ASTM E84</td>
 
    <td>Flame Spread - 3, Smoke Dev - 0</td>
 
  </tr>
 
  <tr>
 
    <td>Water Absorption</td>
 
    <td>ASTM C209</td>
 
    <td>(%) &lt;1.1</td>
 
  </tr>
 
  <tr>
 
    <td>Compressive Properties</td>
 
    <td>ASTM C871/C665</td>
 
    <td>(psi) 14</td>
 
  </tr>
 
  <tr>
 
    <td>Linear Shrinkage</td>
 
    <td>ASTM C356</td>
 
    <td>(%) 0.19</td>
 
  </tr>
 
  <tr>
 
    <td></td>
 
    <td></td>
 
    <td></td>
 
  </tr>
 
  <tr>
 
    <td>POLYISO PROPERTIES </td>
 
    <td>TEST METHOD</td>
 
    <td>TYPICAL RESULTS</td>
 
  </tr>
 
  <tr>
 
    <td>Thermal Resistance</td>
 
    <td>ASTM C518</td>
 
    <td>1&quot; - RSI-l.06 (R-6)</td>
 
  </tr>
 
  <tr>
 
    <td></td>
 
    <td></td>
 
    <td>1.5&quot; - RSI-1.58 (R-9)</td>
 
  </tr>
 
  <tr>
 
    <td></td>
 
    <td></td>
 
    <td>2&quot; - RSI-2.13 (R12 1)</td>
 
  </tr>
 
  <tr>
 
    <td>Dimensional Stability</td>
 
    <td>ASTM D2126</td>
 
    <td>(%) &lt;2</td>
 
  </tr>
 
  <tr>
 
    <td>Compressive Strength</td>
 
    <td>ASTM D1621</td>
 
    <td>(kPa/psm) 138/20</td>
 
  </tr>
 
  <tr>
 
    <td>Product Density</td>
 
    <td>ASTM D1622</td>
 
    <td>(kg/m3) 32 (2.0 pcf)</td>
 
  </tr>
 
  <tr>
 
    <td>Water Absorption</td>
 
    <td>ASTM C209</td>
 
    <td>(% by volume) &lt;1</td>
 
  </tr>
 
  <tr>
 
    <td>Water Vapour Permeance</td>
 
    <td>ASTM E96</td>
 
    <td>(ng/pa.s.m<sup>2</sup>) 57.5 (&lt;1 Perm)</td>
 
  </tr>
 
</table>
 
 
 
 
 
Soprema Inc. may modify the composition of its products without prior notice Consequently orders will be filled according to the latest specification.
 
 
|}
 
|}
  
Line 149: Line 21:
  
 
<div style="width:150px; text-align: left;">
 
<div style="width:150px; text-align: left;">
:[[File:Pdf.png|150 px|link=http://rpm.rcabc.org/images/1/1c/Soprema_XPRESS_ISO_Tech_Data.pdf|'''Technical Data Sheet''']]
+
:[[File:Pdf.png|100 px|link=http://rpm.rcabc.org/images/1/1a/Soprema_3-1_Soprasmart_Rock_TDS.pdf|'''Technical Data Sheet''']]
 
</div>
 
</div>
 
  
 
<hr>
 
<hr>
  
[[Materials by Product Type|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Accepted Materials'']]
+
[[Division C: Accepted Materials|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Accepted Materials'']]
 
 
  
 
[[Main Page|Home]]
 
[[Main Page|Home]]

Latest revision as of 22:05, 28 June 2021

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc.
Accepted for the RoofStar Guarantee Program
Date here
Accepted for application in
Roof Waterproofing Systems
Product Summary
Formerly known as Xpress ISO, 3-1 SopraSmart Rock is a high performance insulating base sheet panel. It is composed of SBS modified bitumen membrane with a non-woven polyester reinforcement and a surface covered with a thermofusible plastic film. This membrane is factory-laminated on a high density mineral wool (stone wool) support panel and on a polyisocyanurate insulation board (SOPRA-ISO).
(adapted from the Technical Data Sheet)
Conditions and Limitations
None
Click below for the Technical Data Sheet.
Technical Data Sheet

Back to Accepted Materials

Home