Difference between revisions of "Materials:New Tech FF 100 Metal Panel (Precision)"

Jump to: navigation, search

Difference between revisions of "Materials:New Tech FF 100 Metal Panel (Precision)"

(Created page with "{| class="wikitable" |- | style="background-color: #ffffcc; column-width:100%" | '''Notice to the Reader''': The information published in the RCABC '''''Roofing Practices Ma...")
 
 
(One intermediate revision by the same user not shown)
Line 14: Line 14:
 
;Accepted for application in: Water-shedding Systems (ASM only)
 
;Accepted for application in: Water-shedding Systems (ASM only)
 
;Product Summary: Snap-lock standing seam metal panel that is fastened along one side (on the flange).  Each panel is produced with proprietary double-end cut-outs to facilitate versatile installation and save time in the field.
 
;Product Summary: Snap-lock standing seam metal panel that is fastened along one side (on the flange).  Each panel is produced with proprietary double-end cut-outs to facilitate versatile installation and save time in the field.
 +
:Machine: New Tech SSQ II (roll-forming machine)
 
:Gauge (accepted): 24
 
:Gauge (accepted): 24
 
:Minimum panel width: 300 mm (12")
 
:Minimum panel width: 300 mm (12")
 
:Maximum panel width: 600 mm (24")
 
:Maximum panel width: 600 mm (24")
 +
:Seam height: 23.4 mm (15/16")
 
:Stiffeners: Optional
 
:Stiffeners: Optional
 
:Finishes: SMP or PVDF
 
:Finishes: SMP or PVDF

Latest revision as of 22:17, 26 October 2021

Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Precision Metals Ltd.
Accepted for the RoofStar Guarantee Program
October 17, 2021
Accepted for application in
Water-shedding Systems (ASM only)
Product Summary
Snap-lock standing seam metal panel that is fastened along one side (on the flange). Each panel is produced with proprietary double-end cut-outs to facilitate versatile installation and save time in the field.
Machine: New Tech SSQ II (roll-forming machine)
Gauge (accepted): 24
Minimum panel width: 300 mm (12")
Maximum panel width: 600 mm (24")
Seam height: 23.4 mm (15/16")
Stiffeners: Optional
Finishes: SMP or PVDF
Conditions and Limitations
Refer to the Standard for Architectural Sheet Metal (ASM) Roof Systems for limitations concerning flange-fastened snap-lock panels.
Click below for the Technical Data Sheet.
Technical Data Sheet

Back to Accepted Materials

Home