Difference between revisions of "Materials:Sure-Seal EPDM SAT"

Jump to: navigation, search

Difference between revisions of "Materials:Sure-Seal EPDM SAT"

 
(One intermediate revision by the same user not shown)
Line 14: Line 14:
 
;Accepted for application in: Roof Waterproofing Systems
 
;Accepted for application in: Roof Waterproofing Systems
 
;Product Summary: '''Sure-Seal SAT''' is a nominal 60-mil non-reinforced EPDM membrane laminated to a 100%-solid pressure-sensitive adhesive and is available in 10' x 100' (3m x 30m) rolls. The release liner is silicon-coated on one side for consistent release from the adhesive.
 
;Product Summary: '''Sure-Seal SAT''' is a nominal 60-mil non-reinforced EPDM membrane laminated to a 100%-solid pressure-sensitive adhesive and is available in 10' x 100' (3m x 30m) rolls. The release liner is silicon-coated on one side for consistent release from the adhesive.
 
 
:'''Sure-Seal SAT''' membrane is formulated with fire retardants to inhibit the spread of flame and meets or exceeds UL Class A requirements.
 
:'''Sure-Seal SAT''' membrane is formulated with fire retardants to inhibit the spread of flame and meets or exceeds UL Class A requirements.
  

Latest revision as of 22:27, 28 July 2021

Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Carlisle Syntec
Accepted for the RoofStar Guarantee Program
January 2021
Accepted for application in
Roof Waterproofing Systems
Product Summary
Sure-Seal SAT is a nominal 60-mil non-reinforced EPDM membrane laminated to a 100%-solid pressure-sensitive adhesive and is available in 10' x 100' (3m x 30m) rolls. The release liner is silicon-coated on one side for consistent release from the adhesive.
Sure-Seal SAT membrane is formulated with fire retardants to inhibit the spread of flame and meets or exceeds UL Class A requirements.
(adapted from the Technical Data Sheet)
Conditions and Limitations
None
Click below for the Technical Data Sheet.
Technical Data Sheet

Back to Accepted Materials

Home