Difference between revisions of "SBS Plumbing Vent (Conventional Roof System)"

Jump to: navigation, search

Difference between revisions of "SBS Plumbing Vent (Conventional Roof System)"

(→‎RELATED WORK BY OTHERS)
(→‎WORK INCLUDED)
 
(29 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:10.3.5.5.jpg]]
+
{{Template:RPM Info}}
  
−
=== WORK INCLUDED ===
+
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
−
(1) <b>Gypsum Overlay Board: </b>If required by design authority.
+
__NOTOC__
  
−
(2) <b>Vapour Retarder:</b> If required by design authority.
+
<big><big>Division D - Construction Details</big></big>
 +
<hr>
 +
<big><big><big><big><big>SBS | Plumbing Vent (Conventional Roof System) ([[SBS_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big>
 +
{{Template:Construction Details Header}}
 +
<div class="panel panel-success">
 +
<div class="panel-heading"><big>'''SBS Details'''</big></div>
 +
<div class="panel-body">
 +
<div class="col-md-6">
 +
<div style="text-align:center; vertical-align:center">
 +
[[File:10.3.5.5.jpg| link=http://rpm.rcabc.org/images/f/f9/10.3.5.5.jpg | class=img-responsive]]
 +
</div>
 +
</div><!-- COL-MD-6 -->
  
−
(3) <b>Insulation:</b> See list of accepted materials in Section 2.2.
+
<div class="col-md-6">
 +
=== WORK INCLUDED ===
 +
;(1) [[SBS Roof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: If required by ''Design Authority''.
 +
;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: If required by ''Design Authority''.
 +
;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically fastened. See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manual''.
 +
;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]:
 +
;(5) [[SBS Roof Systems Standard#PART_9|'''Primary Membrane''']] and [[SBS Roof Systems Standard#PART_9| '''Membrane Protection''']]
 +
;(6) '''Mastic''': As approved by manufacturer.
 +
;(7) [[SBS Roof Systems Standard#PART_10|'''Membrane Flashing''']]: Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
 +
;(8) '''Storm Collar, Typical Lead Cap or Typical Aluminum Cap''': Re-roofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashing.
  
−
(4) <b>Insulation Overlay:</b>  As required. See <i>RGC Guarantee Standard B4.1, B4.2 </i>and<i> C4.1</i>
+
<hr>
−
 
 
−
(5) <b>Primary Membrane and Membrane Protection</b>
 
−
 
 
−
(6) <b>Mastic:</b>  As approved by manufacturer.
 
−
 
 
−
(7)<b> </b><b>Membrane Flashing:</b> Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
 
−
 
 
−
(8) <b>Storm Collar, Typical Lead Cap or Typical Aluminum Cap: </b>Reroofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashings.
 
  
 
=== RELATED WORK BY OTHERS ===
 
=== RELATED WORK BY OTHERS ===
−
(A) <b>Acceptable Deck</b>
+
;(A) [[SBS Roof Systems Standard#PART_2|'''Acceptable Supporting Deck Structure''']]
−
 
+
;(B) '''Plumbing Stack''': Extend to match top of metal flashing.  Aluminum flashings are required for torch-applied roof systems.
−
(B) <b>Plumbing Stack:</b>  Extend to match top of metal flashing.
+
;(C) '''Wood Blocking''': Optional.
−
 
+
;(D) [[SBS Roof Systems Standard#PART_11|'''Metal Flashing''']]: Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
−
(C) <b>Wood Blocking:</b> Optional.
+
;(E) '''Typical Aluminum Cap''': For use with aluminum flashing.  See requirements for [[SBS Roof Systems Standard#PART_11|'''Settlement Caps''']] on strip-in plumbing flashings.
−
 
+
;(F) '''Typical Lead Cap''': For use with lead flashing.
−
(D) <b>Metal Flashing:</b>  Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
+
;(G) '''Storm Collar''': Non-Bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamp. Use with pipes that extend above flashings.
−
 
+
</div><!-- COL-6-MD -->
−
(E) <b>Typical Aluminum Cap:</b> For use with aluminum flashings.
+
</div><!-- PANEL BODY -->
−
 
+
</div><!-- PANEL -->
−
(F) <b>Typical Lead Cap:</b> For use with lead flashings.
 
−
 
 
−
(G) <b>Storm Collar: </b> Non-Bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamp. Use with pipes that extend above flashings.
 
−
 
 
−
;NOTE:
 
−
*Refer to <i>RGC Guarantee Standards</i> for additional requirements
 
−
*Aluminum flashings required for torch-applied roof systems.
 
−
 
 
−
:'''NOTE''': Refer to <i>RGC Guarantee Standards</i> for additional requirements.
 
  
 +
'''NOTE''': See the [[SBS Roof Systems Standard | '''Standard''']] for additional requirements.
  
 
<hr>
 
<hr>
  
 +
[[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''"SBS" Roof System Details'']]
  
 +
[[Main Page | <i class="fa fa-home fa"></i> Home]]
  
−
 
+
{{Tempate:RPM Page Footer with Copyright and Current Date}}
−
[[Section:D. Application: Low Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''SBS Application'']]
 
−
 
 
−
[[SBS Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''SBS Construction Details'']]
 
−
 
 
−
[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]
 

Latest revision as of 18:15, 27 October 2023



Division D - Construction Details

SBS | Plumbing Vent (Conventional Roof System) ( Article 12.3.2.1.)

Notice to Reader
Images used in a Construction Detail are representative and not prescriptive, and are not necessarily drawn to scale. They are intended to support the related Standard (Ref. Division A, Article 2.2.1.2.).

The reader may link to the related Article in the detail title, or link to the Standard as it relates to a specific element in the detail. All hyperlinks are displayed blue text.

SBS Details

10.3.5.5.jpg

1 WORK INCLUDED

(1) Supporting Deck Overlay
If required by Design Authority.
(2) Air or Vapour Control Layers
If required by Design Authority.
(3) Insulation
Mechanically fastened. See available insulation products in the Accepted Materials Division of this Manual.
(4) Insulation Overlay
(5) Primary Membrane and Membrane Protection
(6) Mastic
As approved by manufacturer.
(7) Membrane Flashing
Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
(8) Storm Collar, Typical Lead Cap or Typical Aluminum Cap
Re-roofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashing.

2 RELATED WORK BY OTHERS

(A) Acceptable Supporting Deck Structure
(B) Plumbing Stack
Extend to match top of metal flashing. Aluminum flashings are required for torch-applied roof systems.
(C) Wood Blocking
Optional.
(D) Metal Flashing
Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
(E) Typical Aluminum Cap
For use with aluminum flashing. See requirements for Settlement Caps on strip-in plumbing flashings.
(F) Typical Lead Cap
For use with lead flashing.
(G) Storm Collar
Non-Bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamp. Use with pipes that extend above flashings.

NOTE: See the Standard for additional requirements.

Back to "SBS" Roof System Details

Home

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=SBS_Plumbing_Vent_(Conventional_Roof_System)&oldid=46760"