Difference between revisions of "SBS Roof System Details"

Jump to: navigation, search

Difference between revisions of "SBS Roof System Details"

(→‎Part 10 - Perimeters and Walls)
 
(6 intermediate revisions by the same user not shown)
Line 8: Line 8:
 
:<big><big><big><big><big>Construction Details for SBS-modified Bitumen Membrane Roof Systems</big></big></big></big></big>
 
:<big><big><big><big><big>Construction Details for SBS-modified Bitumen Membrane Roof Systems</big></big></big></big></big>
  
 +
<div class="col-md-2">
 +
:[[File:SBS Systems page thumb.JPG | link=http://rpm.rcabc.org/images/6/62/SBS_Systems_page_thumb.JPG |175 px]]
 +
</div>
 +
 +
<div class="col-md-10">
 
:The drawings linked on this page are intended to represent a variety of SBS-modified Bitumen Membrane roof system applications while remaining generic with regards to manufacturers&#8217; specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers&#8217; specifications and the '''''RoofStar Guarantee Standards''''' to develop a system acceptable to both the manufacturer and the '''''RoofStar Guarantee Program'''''.
 
:The drawings linked on this page are intended to represent a variety of SBS-modified Bitumen Membrane roof system applications while remaining generic with regards to manufacturers&#8217; specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers&#8217; specifications and the '''''RoofStar Guarantee Standards''''' to develop a system acceptable to both the manufacturer and the '''''RoofStar Guarantee Program'''''.
  
 
:For further information about SBS-modified Bitumen Membrane System designs and requirements, see the '''[http://rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard Standard for SBS-modified Bitumen Membrane Roof Systems]'''.
 
:For further information about SBS-modified Bitumen Membrane System designs and requirements, see the '''[http://rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard Standard for SBS-modified Bitumen Membrane Roof Systems]'''.
 +
</div>
  
−
<div style="width:300px; text-align: left;">
 
−
:[[File:SBS Systems page thumb.JPG | link=http://rpm.rcabc.org/images/6/62/SBS_Systems_page_thumb.JPG |300 px]]
 
−
</div>
 
 
<div class="col-md-12">
 
<div class="col-md-12">
−
<div style="width:40px; vertical-align: center; text-align: left;">
 
−
[[File:Pdf.png|40 px]]
 
 
</div>
 
</div>
−
'''NOTE''': 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details.  Click on the detail link and look for the icon.
+
<div class="col-md-4">
−
</div>
 
−
<div class="col-md-6">
 
 
<hr>
 
<hr>
−
====Part 1 - General====
+
===Part 1 - General===
−
:'''Permitted Roof Systems''' ([[Model_SBS_Standard_(2022)#1.1.3.1._Permitted_Roof_Systems | Article 1.1.3.1.]])
+
====='''Permitted Roof Systems''' ([[SBS_Roof_Systems_Standard#1.1.3.1._Permitted_Roof_Systems | Article 1.1.3.1.]])=====
−
:[[SBS 1.1.3.-1 Conventionally Insulated System (typical) | {{hilite | Conventionally Insulated System (typical)|| 2021-February-7 }}]]
+
<ol>
−
:[[SBS 1.1.3.-2 Conventionally Insulated System (alternate) | {{hilite | Conventionally Insulated System (alternate)|| 2021-February-7 }}]]
+
<li>[[SBS Conventionally Insulated System (typical) | {{hilite | Conventionally Insulated System (Typical)|| 2021-February-7 }}]]
−
:[[SBS 1.1.3.-3 Protected Membrane Roof (typical) | {{hilite | Protected Membrane Roof (typical)|| 2021-February-7 }}]]
+
<li>[[SBS Conventionally Insulated System (alternate) | {{hilite | Conventionally Insulated System (Alternate)|| 2021-February-7 }}]]
 +
<li>[[SBS Protected Roof Assembly (typical) | {{hilite | Protected Roof Assembly (Typical) || 2021-February-7 }}]]
 +
</li></ol>
  
−
====Part 2 (Reserved)====
+
===Part 6 - Air and Vapour Controls===
 +
====='''Continuity and Support''' ([[SBS_Roof_Systems_Standard#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])=====
 +
<ol>
 +
<li>[[SBS Air and Vapour Controls (field)| {{hilite | Air and Vapour Controls (Field)|| 2021-February-7 }}]]
 +
</li></ol>
  
−
====Part 3 (Reserved)====
+
===Part 10 - Perimeters and Walls===
 +
====='''General Application''' ([[SBS_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])=====
 +
<ol>
 +
<li>[[SBS Membrane Termination A | Membrane Termination A]]
 +
<li>[[SBS Membrane Termination B | Membrane Termination B]]
 +
<li>[[SBS Membrane Termination C | Membrane Termination C]]
 +
<li>[[SBS Membrane Termination D | Membrane Termination D]]
 +
<li>[[SBS Membrane Termination E | Membrane Termination E]]
 +
<li>[[SBS Membrane Termination F | Membrane Termination F]]
 +
</li></ol>
  
−
====Part 4 (Reserved)====
+
====='''Parapets''' ([[SBS_Roof_Systems_Standard#10.3.4.1._Parapets | Article 10.3.4.1.]])=====
 +
<ol>
 +
<li>[[SBS Parapet (Typical)| Parapet (Typical)]]
 +
<li>[[SBS Parapet (Independent of Roof Structure) | Parapet (Independent of Roof Structure)]]
 +
<li>[[SBS Tall Parapet | Tall Parapet]]
 +
<li>[[SBS Parapet-Wall Connection | Parapet-Wall Connection]]
 +
</li></ol>
  
−
====Part 5 - Deck and Wall Overlays====
+
====='''Low-profile Edges''' ([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])=====
 +
<ol>
 +
<li>[[SBS Metal Edge Termination| {{hilite | Metal Edge Termination|| 2021-February-7 }}]]
 +
<li>[[SBS Canted Edge | {{hilite | Canted Edge|| 2021-February-7 }}]]
 +
</li></ol>
  
−
====Part 6 - Air and Vapour Controls====
 
  
−
:'''Continuity and Support''' ([[Model_SBS_Standard_(2022)#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])
+
</div>
−
:[[SBS 6.3.2.-1 Air and Vapour Controls (field)| {{hilite | SBS 6.3.2.1.-1 Air and Vapour Controls (field)|| 2021-February-7 }}]]
+
<div class="col-md-4">
−
 
+
<hr>
−
====Part 7 (Reserved)====
 
−
 
 
−
====Part 8 (Reserved)====
 
−
 
 
−
====Part 9 (Reserved)====
 
  
−
====Part 10 - Perimeters and Walls====
+
===Part 10 (continued)===
 +
====='''Fire Separations''' ([[SBS_Roof_Systems_Standard#10.3.4.4._Fire_Separation_Walls | Article 10.3.4.4.]])=====
 +
<ol>
 +
<li>[[SBS Fire Separation Joint |Fire Separation Joint]]
 +
<li>[[SBS Fire Separation Wall | Fire Separation Wall]]
 +
</li></ol>
  
−
:'''General Application''' ([[Model_SBS_Standard_(2022)#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])
+
====='''Doors, Windows, and Wall Openings''' ([[SBS_Roof_Systems_Standard#10.3.4.5._Doors.2C_Windows.2C_and_Wall_Openings | Article 10.3.4.5.]])=====
−
:[[SBS 10.3.2.-1 Perimeter Membrane Termination (typical) | Perimeter Membrane Termination (typical)]]
+
<ol>
−
:[[SBS 10.3.1-3 Perimeter Membrane Termination (stucco wall, replacement roofing) | Stucco Wall (replacement roofing)]]
+
<li>[[SBS Low Door Opening | {{hilite | Low Door Opening || 2022-February-5 }}]]
−
:[[SBS 10.3.1-4 Perimeter Membrane Termination (double surface reglet)| Double Surface Reglet]]
+
<li>[[SBS Window Opening | Window Opening]]
 +
</li></ol>
  
−
:'''Parapets''' ([[Model_SBS_Standard_(2022)#10.3.4.1._Parapets | Article 10.3.4.1.]])
+
====='''Expansion Joints''' ([[SBS_Roof_Systems_Standard#10.3.6.1._Expansion_Joints | Article 10.3.6.1.]])=====
−
:[[SBS 10.3.5.1-1 Parapet (typical)| Parapet (typical)]]
+
<ol>
−
:[[SBS 10.3.5.1-2 Parapet (independent of roof structure)(typical) | Parapet (independent of roof structure)(typical)]]  
+
<li>[[SBS Expansion Joint (Wall) | Expansion Joint (Wall)]]
−
:[[SBS 10.3.5.1-3 Parapet, tall (typical) | Parapet, tall (typical)]]
+
<li>[[SBS Expansion Joint (Field)| Expansion Joint (Field)]]
−
:[[SBS 10.3.5.1-4 Parapet (wall tie-in) | Parapet (wall tie-in)]]
+
</li></ol>
  
−
:'''Low-profile Edges''' ([[Model_SBS_Standard_(2022)#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])
+
====='''Control Joints (Roof Dividers)''' ([[SBS_Roof_Systems_Standard#10.3.6.2._Control_Joints_.28Roof_Dividers.29 | Article 10.3.6.2.]])=====
−
:[[SBS 10.3.5.2 Metal Edge Termination | {{hilite | Metal Edge Termination|| 2021-February-7 }}]]
+
<ol>
−
:[[SBS 10.3.5.3 Canted Edge | {{hilite | Canted Edge|| 2021-February-7 }}]]
+
<li>[[SBS Control Joint (Roof Divider)| Control Joint (Roof Divider)]]
 +
</li></ol>
  
−
:'''Fire Separation Walls''' ([[Model_SBS_Standard_(2022)#10.3.4.4._Fire_Separation_Walls | Article 10.3.4.4.]])
+
===Part 11 - Drainage===
−
:[[SBS 10.3.9-1 Roof-Wall Transitions (fire separation joint)| SBS 10.3.4.4.-1 Fire Separation Joint]]
+
====='''Cast-iron Roof Drains''' ([[SBS_Roof_Systems_Standard#11.3.3.2._General_Requirements_for_Cast-iron_Roof_Drains | Article 11.3.3.2.]])=====
−
:[[SBS 10.3.9-2 Roof-Wall Transitions (fire separation wall)| SBS 10.3.4.4.-2 Fire Separation Wall]]
+
<ol>
 +
<li>[[SBS 11.3.2.2-1 Cast Iron Drains| Cast Iron Drains]]
 +
</li></ol>
  
−
:'''Doors, Windows, and Wall Openings''' ([[Model_SBS_Standard_(2022)#10.3.4.5._Doors.2C_Windows.2C_and_Wall_Openings | Article 10.3.4.5.]])
+
====='''Flanged Insert-type Roof Drains''' ([[SBS_Roof_Systems_Standard#11.3.3.6._Flanged_Insert-type_Roof_Drains | Article 11.3.3.6.]])=====
−
:[[SBS 10.3.7.1 Low Door Opening | {{hilite | Low Door Opening || 2022-February-5 }}]]
+
<ol>
−
:[[SBS 10.3.7.2 Window Curb | Window Opening]]
+
<li>[[SBS Flanged Insert Drain| Flanged Insert Drain]]
 +
<li>[[SBS Flanged Insert Drain (Clamping Ring)| Flanged Insert Drain (Clamping Ring)]]
 +
</li></ol>
  
−
:'''Expansion Joints''' ([[Model_SBS_Standard_(2022)#10.3.6.1._Expansion_Joints | Article 10.3.6.1.]])
+
====='''Scuppers and Overflows''' ([[SBS_Roof_Systems_Standard#11.3.3.7._Scuppers_and_Overflows | Article 11.3.3.7.]])=====
−
:[[SBS 10.3.1-2 Perimeter Membrane Termination (expansion joint) | Expansion Joint (at wall)]]
+
<ol>
−
:[[SBS 10.3.6.1 Expansion Joint| Expansion Joint (in field)]]
+
<li>[[SBS Open-wall Scupper Drain | Open-wall Scupper Drain ]]
−
 
+
<li>[[SBS Through-wall Scupper Drain | Through-wall Scupper Drain ]]
−
:'''Control Joints (Roof Dividers)''' ([[Model_SBS_Standard_(2022)#10.3.6.2._Control_Joints_.28Roof_Dividers.29 | Article 10.3.6.2.]])
+
</li></ol>
−
:[[SBS 10.3.6.2 Control Joint (Roof Divider)| Control Joint (typical)]]
 
  
 
</div>
 
</div>
−
<div class="col-md-6">
+
<div class="col-md-4">
 
<hr>
 
<hr>
  
−
====Part 11 - Drainage====
+
===Part 12 - Penetrations and Curbs===
−
:'''General Requirements for Cast-iron Roof Drains''' ([[Model_SBS_Standard_(2022)#11.3.3.2._General_Requirements_for_Cast-iron_Roof_Drains | Article 11.3.3.2.]])
 
−
:[[SBS 11.3.2.2-1 Cast Iron Drains| Cast Iron Drains]]
 
−
 
 
−
:Flanged Insert-type Roof Drains ([[Model_SBS_Standard_(2022)#11.3.3.6._Flanged_Insert-type_Roof_Drains | Article 11.3.3.6.]])
 
−
:[[SBS 11.3.2.4-1 Flange-style Drains (typical)| Flanged Drains (typical)]]
 
−
:[[SBS 11.3.2.4-2 Flange-style Drains (clamping)| Flanged Drains (clamping)]]
 
−
 
 
−
:'''Scuppers and Overflows''' ([[Model_SBS_Standard_(2022)#11.3.3.7._Scuppers_and_Overflows | Article 11.3.3.7.]])
 
−
:[[SBS 11.3.2.5-1 Scuppers and Overflows (open wall scupper)| Open Wall Scupper]]
 
−
:[[SBS 11.3.2.5-2 Scuppers and Overflows (through-wall scupper)| Through-wall Scupper]]
 
−
 
 
−
====Part 12 - Penetrations and Curbs====
 
  
−
:'''General Requirements for Flashing Penetrations''' ([[Model_SBS_Standard_(2022)#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])
+
====='''Flashing Penetrations''' ([[SBS_Roof_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])=====
−
:[[SBS 11.3.3.3-1 Penetration Flashings (plumbing vent)| Plumbing Vent]]
+
<ol>
−
:[[SBS 11.3.3.3-2 Penetration Flashings  (two-part cable)| {{hilite | Two-part Cable Flashing|| 2021-February-7 }}]]
+
<li>[[SBS Plumbing Vent (Conventional Roof System)| Plumbing Vent (Conventional Roof System)]]
−
:[[SBS 11.3.3.2-4 Curbs and Sleepers (multiple penetrations)| Multiple Penetration Flashing]]
+
<li>[[SBS 2-Part Retrofit Flashing (Cable Penetration) | {{hilite | 2-Part Retrofit Flashing (Cable Penetration) || 2021-February-7 }}]]
−
:[[SBS 11.3.5-1 Roof Anchors (typical) | Roof Anchors (typical)]]
+
<li>[[SBS Fall Protection Anchor in Roof | Fall Protection Anchor in Roof]]
−
:[[SBS 11.3.5-2 Roof Anchors (conventional system) | Roof Anchors (conventional system)]]
+
<li>[[SBS Fall Protection Anchor in Wall  | Fall Protection Anchor in Wall]]
−
:[[SBS 11.3.5-3 Roof Anchors (PMRA) | Roof Anchors (PMRA)]]
+
<li>[[SBS Fall Protection Anchor in Wall (Protected) | SBS Fall Protection Anchor in Wall (Protected Roof System)]]
 +
</li></ol>
  
−
:'''Curbs, Sleepers, and Equipment Pads''' ([[Model_SBS_Standard_(2022)#12.3.2.4._Curbs.2C_Sleepers.2C_and_Equipment_Pads | Article 12.3.2.4.]])
+
====='''Curbs, Sleepers, and Equipment Pads''' ([[SBS_Roof_Systems_Standard#12.3.2.4._Curbs.2C_Sleepers.2C_and_Equipment_Pads | Article 12.3.2.4.]])=====
−
:[[SBS 11.3.3.2-1 Curbs and Sleepers (basic curb)| {{hilite | Uninsulated Curb|| 2021-February-7 }}]]
+
<ol>
−
:[[SBS 11.3.3.2-3 Curbs and Sleepers (mechanical opening)| Insulated Curb (Mechanical)]]
+
<li>[[SBS Basic Curb| {{hilite | Basic Curb || 2021-February-7 }}]]
−
:[[SBS 11.3.3.2-2 Curbs and Sleepers (equipment sleeper)| Equipment Sleeper]]
+
<li>[[SBS Curb for Multiple Penetrations| Curb for Multiple Penetrations]]
 +
<li>[[SBS Mechanical Equipment Curb| Mechanical Equipment Curb]]
 +
<li>[[SBS Equipment Sleeper | Equipment Sleeper]]
 +
</li></ol>
  
−
:'''Railings, Ladders, and Other Attached Structures''' ([[Model_SBS_Standard_(2022)#12.3.2.7._Railings.2C_Ladders.2C_and_Other_Attached_Structures | Article 12.3.2.7.]])
+
====='''Railings, Ladders, and Other Attached Structures''' ([[SBS_Roof_Systems_Standard#12.3.2.7._Railings.2C_Ladders.2C_and_Other_Attached_Structures | Article 12.3.2.7.]])=====
−
:[[SBS 11.3.4 Guardrails | Railing]]
+
<ol>
 +
<li>[[SBS Railing | Railing]]
 +
</li></ol>
  
−
:'''Sealant Pockets''' ([[Model_SBS_Standard_(2022)#12.3.2.8._Sealant_Pockets | Article 12.3.2.8.]])
+
====='''Sealant Pockets''' ([[SBS_Roof_Systems_Standard#12.3.2.8._Sealant_Pockets | Article 12.3.2.8.]])=====
−
:[[SBS 11.3.3.4 Sealant Pocket| Sealant Pocket (typical)]]
+
<ol>
 +
<li>[[SBS Sealant Pocket| Sealant Pocket]]
 +
</li></ol>
  
−
====Part 13 - Linear Metal Flashing====
+
===Part 13 - Linear Metal Flashing===
 
:See the separate page, [[Linear_Metal_Flashing_Details | Construction Details for Linear Metal Flashings]].
 
:See the separate page, [[Linear_Metal_Flashing_Details | Construction Details for Linear Metal Flashings]].
  
−
====Part 14 - The Roof as a Platform====
+
===Part 14 - The Roof as a Platform===
  
−
:'''Structures and Equipment''' ([[Model_SBS_Standard_(2022)#14.3.2.7._Structures_and_Equipment | Article 14.3.2.7.]])
+
====='''Structures and Equipment''' ([[SBS_Roof_Systems_Standard#14.3.2.7._Structures_and_Equipment | Article 14.3.2.7.]])=====
−
:[[SBS 14.3.3 Structures and Equipment (planter pre-curb) | Planter Wall ("pre-curb")]]
+
<ol>
 +
<li>[[SBS Structural Planter | Structural Planter]]
 +
</li></ol>
  
 
</div>
 
</div>
Line 133: Line 159:
  
 
[[Main Page | <i class="fa fa-home fa"></i> Home]]
 
[[Main Page | <i class="fa fa-home fa"></i> Home]]
−
{{Tempate:RPM Page Footer with Copyright and Current Date}}
+
{{Template:RPM Page Footer with Copyright and Current Date}}
 
</div>
 
</div>

Latest revision as of 16:03, 26 February 2024



Division D - Construction Details
Construction Details for SBS-modified Bitumen Membrane Roof Systems
SBS Systems page thumb.JPG
The drawings linked on this page are intended to represent a variety of SBS-modified Bitumen Membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers’ specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
For further information about SBS-modified Bitumen Membrane System designs and requirements, see the Standard for SBS-modified Bitumen Membrane Roof Systems.

Part 1 - General

Permitted Roof Systems ( Article 1.1.3.1.)
  1. Conventionally Insulated System (Typical)
  2. Conventionally Insulated System (Alternate)
  3. Protected Roof Assembly (Typical)

Part 6 - Air and Vapour Controls

Continuity and Support ( Article 6.3.2.1.)
  1. Air and Vapour Controls (Field)

Part 10 - Perimeters and Walls

General Application ( Article 10.3.2.3.)
  1. Membrane Termination A
  2. Membrane Termination B
  3. Membrane Termination C
  4. Membrane Termination D
  5. Membrane Termination E
  6. Membrane Termination F
Parapets ( Article 10.3.4.1.)
  1. Parapet (Typical)
  2. Parapet (Independent of Roof Structure)
  3. Tall Parapet
  4. Parapet-Wall Connection
Low-profile Edges ( Article 10.3.4.2.)
  1. Metal Edge Termination
  2. Canted Edge


Part 10 (continued)

Fire Separations ( Article 10.3.4.4.)
  1. Fire Separation Joint
  2. Fire Separation Wall
Doors, Windows, and Wall Openings ( Article 10.3.4.5.)
  1. Low Door Opening
  2. Window Opening
Expansion Joints ( Article 10.3.6.1.)
  1. Expansion Joint (Wall)
  2. Expansion Joint (Field)
Control Joints (Roof Dividers) ( Article 10.3.6.2.)
  1. Control Joint (Roof Divider)

Part 11 - Drainage

Cast-iron Roof Drains ( Article 11.3.3.2.)
  1. Cast Iron Drains
Flanged Insert-type Roof Drains ( Article 11.3.3.6.)
  1. Flanged Insert Drain
  2. Flanged Insert Drain (Clamping Ring)
Scuppers and Overflows ( Article 11.3.3.7.)
  1. Open-wall Scupper Drain
  2. Through-wall Scupper Drain

Part 12 - Penetrations and Curbs

Flashing Penetrations ( Article 12.3.2.1.)
  1. Plumbing Vent (Conventional Roof System)
  2. 2-Part Retrofit Flashing (Cable Penetration)
  3. Fall Protection Anchor in Roof
  4. Fall Protection Anchor in Wall
  5. SBS Fall Protection Anchor in Wall (Protected Roof System)
Curbs, Sleepers, and Equipment Pads ( Article 12.3.2.4.)
  1. Basic Curb
  2. Curb for Multiple Penetrations
  3. Mechanical Equipment Curb
  4. Equipment Sleeper
Railings, Ladders, and Other Attached Structures ( Article 12.3.2.7.)
  1. Railing
Sealant Pockets ( Article 12.3.2.8.)
  1. Sealant Pocket

Part 13 - Linear Metal Flashing

See the separate page, Construction Details for Linear Metal Flashings.

Part 14 - The Roof as a Platform

Structures and Equipment ( Article 14.3.2.7.)
  1. Structural Planter

Standard for SBS-modified Bitumen Membrane Roof Systems

Home

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=SBS_Roof_System_Details&oldid=47331"