TPO Roof System Details

Jump to: navigation, search

TPO Roof System Details



Division D - Construction Details

Construction Details for TPO Membrane Roof Systems
Editor's note
This page is currently under revision, as the details are renumbered and new details and printable detail pages are added. Continue to watch for further updates to the this page and the displayed links.
The drawings contained within this section are intended to represent a variety of thermoplastic roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and the Standard for TPO Membrane Roof Systems to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
TPO project (courtesy Carlisle Syntec).jpg

Pdf.png

NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.


1 GENERAL

TPO 1.3.1-1 Conventionally Insulated System (mechanically attached)
TPO 1.3.1-2 Conventionally Insulated System (adhered)
TPO 1.3.1-3 Protected Membrane Roof Assembly (typical)

2 SUPPORTING STRUCTURES: Decks and Walls

3 SECURING the ROOF ASSEMBLY

4 MATERIALS

5 DECK and WALL OVERLAYS

6 AIR and VAPOUR CONTROLS

TPO 6.3.1 Air and Vapour Controls (field)

7 INSULATION

8 INSULATION OVERLAYS

9 FIELD MEMBRANE

10 PERIMETERS and WALLS


11 DRAINS and PENETRATIONS

12 PROTECTED MEMBRANES and OTHER DETAILS

13 METAL FLASHINGS

14 THE ROOF as a PLATFORM


Standard for TPO Membrane Roof Systems

Home

© RCABC 2021
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC.