Template:Materials - Hot Fluid-applied Rubberized Asphalt (Roofs)

Jump to: navigation, search

Template:Materials - Hot Fluid-applied Rubberized Asphalt (Roofs)

Revision as of 16:36, 10 February 2021 by James Klassen (talk | contribs)
These are fully adhered waterproofing system that utilize hot applied rubberized asphalt compounds, with reinforcement scrims, to form monolithic (seamless) flexible waterproofing membranes.
Composition
These Accepted Materials consist of single component rubberized asphalt compound installed with reinforcement between two a two layer system. Hot applied rubberized asphalt is fully-adhered to both vertical and horizontal structural surfaces to form monolithic (seamless) flexible waterproofing membrane. Reinforced membrane flashings are installed in Hot applied rubberized asphalt at all transitions (for example, at wall to deck plane changes).
Hot applied rubberized asphalt systems are used only in a Protected Membrane Roof Assembly (PMRA).
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Nominal Product Thickness, Wet (mm) Approximate Weight (Kg/m2) Reinforcement Material Reinforcement Material Weight (g/m2) Applicator Training
Henry Company Canada 790-11 Hot Rubberized Asphalt 5.5 Not stated Not stated Consult manufacturer
Hydrotech Membrane Corporation Monolithic Membrane 6125 5.5 Not stated Consult manufacturer
Soprema Inc. Colphene H 5.5 7.2 Consult manufacturer