Working Page 1

Division D - Construction Details

---

Construction Details for Asphalt Shingle Roof Systems

The drawings linked on this page are intended to represent a variety of asphalt shingle roof system applications while remaining generic with regards to manufacturer's specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturer's specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.

For further information about Asphalt Shingle Roof System designs and requirements, see the Standard for Asphalt Shingle Roof Systems.

---

Part 6 - Air and Vapour Controls

Continuity and Support ( Article 6.3.2.1.)

1. Air and Vapour Controls

Part 9 - Roof Field (Shingle Systems)

Application (Common and Steep Slopes) ( Article 9.3.2.4.)

1. Application (Common and Steep Slopes)

Application (Low Slopes) ( Article 9.3.2.4.)

1. Application (Low Slopes)

Changes in Slope ( Article 9.3.2.7.)

1. Changes in Slope (Inside Angle)
2. Changes in Slope (Outside Angle)

---

Part 10 - Perimeters and Valleys

Eave and Rake Edge Details ( Article 10.3.4.2.)

1. Eaves (All Slopes)
2. Diverter Flashing

Valleys ( Article 10.3.5.2.)

1. ASh 10.4.1 Open Valley
2. ASh 10.4.2 Closed Cut Valley
3. ASh 10.4.3 Woven Valley

Valley Intersections with Ridge ( Article 10.3.5.9.)

1. ASh 10.5.1 Valley Transition (Upper)

---

Part 10 - Perimeters and Walls

Intersections with Waterproofing Roof Systems ( Article 10.3.7.2.)

1. ASh 10.7.1 Junctions with Waterproofing Systems (Upper)
2. ASh 10.7.2 Junctions with Waterproofing Systems (Lower)

Part 11 - Drainage

Membrane Gutters ( Article 11.3.3.8.)

1. ASh 12.2.1 Built-in Gutter (Design)

Part 12 - Penetrations and Curbs

Penetration Flashing ( Article 12.3.2.1.)

1. ASh 11.1.1 Masonry Flashing (Chimney)
2. ASh 11.1.2 Cylindrical Penetration Flashing (Typical)
3. ASh 11.1.3 Curb Flashing (Typical)
4. ASh 11.3.1 Penetration flashing with storm collar

Curbs ( Article 12.3.2.4.)

1. Curb (Split Panel Flashing)

Part 13 - Linear Metal Flashing

See the separate page, Details for Linear Metal Flashings.

---

Standard for ASM Roof Systems

Home

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Accept Terms Of Use

We use cookies to enhance your browsing experience and analyze website traffic. By clicking "Agree" or continuing to browse our website, you consent to the use of cookies and agree to the Roofing Practices Manual Terms Of Use.

Agree