View source for AS Details:E2.7.11 (Counter-flashing - Diverter Flashing)

<hr>
[[File:7.1.5.9.jpg]]
<br>


==== WORK INCLUDED ====

(1) <b>Trim</b>: and the kick-out must be approximately 20-degree angle to the vertical slope.

(2) <b>Fold Layout</b>: Formed from a minimum 26 guage galvanized steel diverters shall extend a minimum 125 mm (5") up vertical surfaces 100 mm (4") to the roof.

(3) <b>Breadpanned Corner Fold</b>: Fold up must be equal in height to to the upstand of the flashing.

(4) <b>Hidden Seam</b>: Breadpan fold to be turned behind the upstand.

(5) <b>Angle Trim</b>: Kick-out can be angle trimmed and a drip edge formed at the outlet. Outlet is to extend a minimum of 25mm (1") lower than the edge of the roof material and lead water into the gutter where existing.

;<i>NOTE</i>
*Refer to <i>RGC Guarantee Standards</i> for additional requirements 
*Proprietary soldered or welded diverter flashing may be used provided they conform to RGC Guarantee Standards.



[[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Asphalt Shingle Application'']]

[[Asphalt Shingles Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Asphalt Shingles Construction Details'']]

[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]