Difference between revisions of "Materials:Alsan RS System"
Difference between revisions of "Materials:Alsan RS System"
Line 17: | Line 17: | ||
:*Alsan RS Catalyst Powder | :*Alsan RS Catalyst Powder | ||
+ | :The Alsan Flashing is a waterproofing one-component polyurethane / bitumen coating. It is used for the upstands and roofing details where it is difficult to apply waterproofing membranes (example: complex upstands with numerous angles, hard to reach areas due to their narrowness or their environment, circular flashings, etc.). | ||
+ | |||
+ | :Alsan Flashing is ready to use. It is installed directly over traditional bituminous waterproofing or approved substrates. This liquid waterproofing process applies where torches are prohibited or dangerous (example: inflammable environments, skylight flashings, etc.). | ||
+ | |||
+ | :The Alsan Flashing has a 100 g/m², 150 mm (6") wide reinforcement that must be installed at all angles and joints between two supports. | ||
+ | |||
+ | :<u>ALSAN FLASHING</u> | ||
+ | |||
+ | :;Definition: Ready to use waterproofing, one component polyurethane / bitumen coating. | ||
+ | |||
+ | :;Application: Upstands and roof details. | ||
+ | |||
+ | :;Presentation: Thixotropic paste (mixing reduces the viscosity). | ||
+ | |||
+ | :;Colour: Brown | ||
+ | |||
+ | :;Viscosity: Brookfield at 25ºC 35 000 centipoises | ||
+ | |||
+ | :;Solids Contents: 80% ± 2% | ||
+ | |||
+ | :;Flash Point: 2.5ºC | ||
+ | |||
+ | :;Format:19 litre container | ||
+ | |||
+ | :;Inflammable: Yes | ||
+ | |||
+ | :;Covering Power: 0.75 l/m² (19 litres covers 25m² (270 ft²)) | ||
+ | |||
+ | :<u>FLASHING REINFORCEMENT</u> | ||
+ | |||
+ | :;Definition: Flexible reinforcement made of a woven 100 g/m² polyester. | ||
+ | |||
+ | :;Application: Upstand angles, support junctions and joints. | ||
+ | |||
+ | :;Format: 0.15 m (6") wide x 30.5 m (100 ft) long strip. | ||
|} | |} | ||
Revision as of 17:42, 8 November 2016
Notice to the Reader:
The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority. |
Manufacturer: Soprema Inc.
|
- Click below for the Technical Data Sheets