Difference between revisions of "Materials:Alsan RS System"

Revision as of 21:30, 23 April 2018

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc. Accepted for RoofStar Guarantee Program Date TBA Product Summary The Alsan RS System includes the Accepted Materials Alsan RS 230 Flash and Alsan Flashing, which are complemented by: Alsan RS Fleece Alsan RS 276 Primer Alsan RS 222 Primer Alsan RS Catalyst Powder FLASHING REINFORCEMENT Definition Flexible reinforcement made of a woven 100 g/m² polyester. Application Vertical membrane terminations, details on the water plane; must be used with the polyester Alsan RS Fleece reinforcement embedded in and base and top coat of liquid. Format 0.15 m (6") wide x 30.5 m (100 ft) long strip.

Click below for the Technical Data Sheets

Alsan RS 230 Flash - Technical Data Sheet

Alsan RS 230 Flash TDS

Alsan RS Fleece TDS

Alsan RS 276 Primer - Technical Data Sheet

Alsan RS 276 Primer TDS

Alsan RS 222 Primer - Technical Data Sheet

Alsan RS 222 Primer TDS

Alsan RS Catalyst Powder - Technical Data Sheet

Alsan RS Catalyst Powder TDS

Back to Accepted Materials

Home

@@ Line 16: / Line 16: @@
 :*Alsan RS 222 Primer
 :*Alsan RS Catalyst Powder
-:The Alsan Flashing is a waterproofing one-component polyurethane / bitumen coating. It is used for the upstands and roofing details where it is difficult to apply waterproofing membranes (example: complex upstands with numerous angles, hard to reach areas due to their narrowness or their environment, circular flashings, etc.).
-:Alsan Flashing is ready to use. It is installed directly over traditional bituminous waterproofing or approved substrates. This liquid waterproofing process applies where torches are prohibited or dangerous (example: inflammable environments, skylight flashings, etc.).
-:The Alsan Flashing has a 100 g/m&#178;, 150 mm (6") wide reinforcement that must be installed at all angles and joints between two supports.
-:<u>ALSAN FLASHING</u>
-:;Definition: Ready to use waterproofing, one component polyurethane / bitumen coating.
-:;Application: Upstands and roof details.
-:;Presentation: Thixotropic paste (mixing reduces the viscosity).
-:;Colour: Brown
-:;Viscosity: Brookfield at 25&#186;C 35 000 centipoises
-:;Solids Contents: 80% &#177; 2%
-:;Flash Point: 2.5&#186;C
-:;Format:19 litre container
-:;Inflammable: Yes
-:;Covering Power: 0.75 l/m&#178; (19 litres covers 25m&#178; (270 ft&#178;))
 :<u>FLASHING REINFORCEMENT</u>
@@ Line 49: / Line 21: @@
 :;Definition: Flexible reinforcement made of a woven 100 g/m&#178; polyester.
-:;Application: Upstand angles, support junctions and joints.
+:;Application: Vertical membrane terminations, details on the water plane; must be used with the polyester Alsan RS Fleece reinforcement embedded in and base and top coat of liquid.
 :;Format: 0.15 m (6") wide x 30.5 m (100 ft) long strip.
@@ Line 60: / Line 32: @@
 <div style="text-align: center;">
 :Alsan RS 230 Flash TDS
-</div>
-</div>
-<div class="col-md-2">
-:[[File:Pdf.png|150 px|link=http://rpm.rcabc.org/images/e/ed/Soprema_Alsan_Flashing_TDS.pdf|'''Alsan Flashing - Technical Data Sheet''']]
-<div style="text-align: center;">
-:Alsan Flashing TDS
 </div>
 </div>