Difference between revisions of "ASM Curb (Split Panel Flashing)"

Revision as of 22:11, 24 April 2019

RoofStar Guarantee Standards are blue-linked

ASM Details

(1) Underlayment: The type of underlay required is determined by roof slope.
(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
(3) Metal Panel Clip: Installed to metal roof panel manufacturer's printed instructions.
(4) Architectural Metal Roof Panel
(5) Metal Curb Flashing
(6) Cricket: Required for curbs more than 900 mm (36") wide
(7) Acceptable Caulking: Two rows accepted caulking between overlapping sheets, with preformed closures on trapezoidal ribbed roof panels.
(8) Metal Counter Flashing

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Revision as of 17:36, 23 October 2017 (view source) James Klassen (talk \| contribs) ← Older edit	Revision as of 22:11, 24 April 2019 (view source) James Klassen (talk \| contribs) m (James Klassen moved page ASM Details:E1.7.10 (Curb for Rooftop Equipment) to ASM 11.3 Curb, Split Panel) Newer edit →
(No difference)