Difference between revisions of "Template:MARS Membrane - SBS 2-Ply Base"

Jump to: navigation, search

Difference between revisions of "Template:MARS Membrane - SBS 2-Ply Base"

 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
How to use the table:
 
 
#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
 
#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 
#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a possible alternate in the [http://rpm.rcabc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual and consult the listed manufacturer for written approval.
 
 
 
<div class="table-responsive">
 
<div class="table-responsive">
 
<table class="table">
 
<table class="table">
 
{| class="wikitable" style="margin-left: 20pt; margin-right: auto; border-color:#E7E9E9;"
 
{| class="wikitable" style="margin-left: 20pt; margin-right: auto; border-color:#E7E9E9;"
 
|+
 
|+
! colspan="2" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#a2a9b1" | Primary Material !! rowspan="6" class="unsortable"; style="border:none; background-color:#E7E9E9;"  |
+
! colspan="2" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#54595d" | <span style="color:#fff">Primary Material</span> !! rowspan="6" style="border:none; background-color:#E7E9E9;"  |
! colspan="4" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#a2a9b1" | Secondary Materials & Deck !! rowspan="6" class="unsortable"; style="border:none; background-color:#E7E9E9;"  |
+
! colspan="4" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#808080" | <span style="color:#fff">Secondary Materials & Deck</span> !! rowspan="6" style="border:none; background-color:#E7E9E9;"  |
! colspan="8" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#a2a9b1" | Tested Assembly Report Data
+
! colspan="8" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#A9A9A9" | <span style="color:#fff">Tested Assembly Report Data </span>
 
|-
 
|-
 
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | Manufacturer
 
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | Manufacturer
 
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | Membrane
 
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | Membrane
! colspan="1" rowspan="2" class="unsortable"; style="vertical-align:center;text-align:center;" | <small>Insulation<br>Overlay </small>
+
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | <small>Insulation<br>Overlay </small>
! colspan="1" rowspan="2" class="unsortable"; style="vertical-align:center;text-align:center;" | <small>Insulation </small>
+
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | <small>Insulation </small>
! colspan="1" rowspan="2" class="unsortable"; style="vertical-align:center;text-align:center;" | <small>Deck<br>Overlay </small>
+
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | <small>Deck<br>Overlay </small>
! colspan="1" rowspan="2" class="unsortable"; style="vertical-align:center;text-align:center;" | <small>Deck</small>
+
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | <small>Deck</small>
! colspan="1" rowspan="2" class="unsortable" | Tested<br>Systems
+
! colspan="1" rowspan="2" | Tested<br>Systems
 
! colspan="2" rowspan="1" style="width:40px;vertical-align:top; background-color:#c8ccd1" | <span style="color:#2a4b8d">kPa</span>
 
! colspan="2" rowspan="1" style="width:40px;vertical-align:top; background-color:#c8ccd1" | <span style="color:#2a4b8d">kPa</span>
 
! colspan="2" rowspan="1" style="width:40px;vertical-align:top; background-color:#c8ccd1" | <span style="color:#2a4b8d">Psf</span>
 
! colspan="2" rowspan="1" style="width:40px;vertical-align:top; background-color:#c8ccd1" | <span style="color:#2a4b8d">Psf</span>
! colspan="1" rowspan="2" class="unsortable"; style="vertical-align:center;text-align:center;" | Downloadable<br>Test Report
+
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | Downloadable<br>Test Report
! colspan="1" rowspan="2" class="unsortable"; style="vertical-align:center;text-align:center;" | Test Facility
+
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | Test Facility
! colspan="1" rowspan="2" class="unsortable"; style="vertical-align:center;text-align:center;" | Test Facility<br>Report No.
+
! colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" | Test Facility<br>Report No.
 
|-
 
|-
! colspan="1" rowspan="1" class="sortable"; style="width:40px;vertical-align:top;background-color:#c8ccd1" | Low
+
! colspan="1" rowspan="1" style="width:40px;vertical-align:top;background-color:#c8ccd1" | Low
! colspan="1" rowspan="1" class="sortable"; style="width:40px;vertical-align:top;background-color:#c8ccd1" | High
+
! colspan="1" rowspan="1" style="width:40px;vertical-align:top;background-color:#c8ccd1" | High
! colspan="1" rowspan="1" class="sortable"; style="width:40px;vertical-align:top;background-color:#c8ccd1" | Low
+
! colspan="1" rowspan="1" style="width:40px;vertical-align:top;background-color:#c8ccd1" | Low
! colspan="1" rowspan="1" class="sortable"; style="width:40px;vertical-align:top;background-color:#c8ccd1" | High
+
! colspan="1" rowspan="1" style="width:40px;vertical-align:top;background-color:#c8ccd1" | High
 
|-
 
|-
 
| '''[[IKO Industries Ltd.]]''' || [[Materials:Fast-N-Stick-180 Base|Fast-N-Stick-180 Base]] || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| Steel || style="text-align:center;"| 2 || style="text-align:center;"| -1.90 || style="text-align:center;"| -4.8 || style="text-align:center;"| -40.00 || style="text-align:center;"| -100.00 || style="text-align:center;"| [http://rpm.rcabc.org/images/1/13/IKO-MARS1.pdf  '''MARS Test Report 1'''] || style="text-align:center;"| exp. Service Inc. || style="text-align:center;"| PUB-DRU292551
 
| '''[[IKO Industries Ltd.]]''' || [[Materials:Fast-N-Stick-180 Base|Fast-N-Stick-180 Base]] || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| Steel || style="text-align:center;"| 2 || style="text-align:center;"| -1.90 || style="text-align:center;"| -4.8 || style="text-align:center;"| -40.00 || style="text-align:center;"| -100.00 || style="text-align:center;"| [http://rpm.rcabc.org/images/1/13/IKO-MARS1.pdf  '''MARS Test Report 1'''] || style="text-align:center;"| exp. Service Inc. || style="text-align:center;"| PUB-DRU292551
Line 35: Line 29:
 
| '''[[IKO Industries Ltd.]]''' || [[Materials:Fast-N-Stick HD Base|Fast-N-Stick HD Base]] || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| Steel || style="text-align:center;"| 3 || style="text-align:center;"| -2.40 || style="text-align:center;"| -5.10 || style="text-align:center;"| -50.00 || style="text-align:center;"| -106.00 || style="text-align:center;"| [http://rpm.rcabc.org/images/6/65/IKO-MARS2.pdf  '''MARS Test Report 2'''] || style="text-align:center;"| exp. Service Inc. || style="text-align:center;"| PUB-DRU285771
 
| '''[[IKO Industries Ltd.]]''' || [[Materials:Fast-N-Stick HD Base|Fast-N-Stick HD Base]] || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| Steel || style="text-align:center;"| 3 || style="text-align:center;"| -2.40 || style="text-align:center;"| -5.10 || style="text-align:center;"| -50.00 || style="text-align:center;"| -106.00 || style="text-align:center;"| [http://rpm.rcabc.org/images/6/65/IKO-MARS2.pdf  '''MARS Test Report 2'''] || style="text-align:center;"| exp. Service Inc. || style="text-align:center;"| PUB-DRU285771
 
|-
 
|-
| '''[[Soprema Inc.]]''' || [[Materials:Soprafix Base 630|Soprafix Base 630]] || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| Steel || style="text-align:center;"| 4 <BR>1<br>3<br>4 || style="text-align:center;"| -2.00<br>---<br>-1.60<br>-2.00 || style="text-align:center;"| -6.20<br>-2.40<br>-3.20<br>-6.20 || style="text-align:center;"| -42.00<br>---<br>-33.00<br>-42.00 || style="text-align:center;"| -130.00<br>-50.00<br>-67.00<br>-130.00 || style="text-align:center;"| [http://rpm.rcabc.org/images/9/99/SOP-MARS3.pdf '''MARS Test Report 3''']<br>[http://rpm.rcabc.org/images/e/e8/SOP-MARS4.pdf '''MARS Test Report 4''']<br>[http://rpm.rcabc.org/images/c/c1/SOP-MARS5.pdf '''MARS Test Report 5''']<br>[http://rpm.rcabc.org/images/0/0b/SOP-MARS10.pdf '''MARS Test Report 10'''] || style="text-align:center;"| exp. Service Inc. || style="text-align:center;"| PUB-DRU168540<br>PUB-DRU168534<br>PUB-DRU206751<br>PUB-DRU339156
+
| '''[[Soprema Inc.]]''' || [[Materials:Soprafix Base 630|Soprafix Base 630]] || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| ---- || style="text-align:center;"| Steel<br>Steel<br>Steel<br>Steel || style="text-align:center;"| 4 <BR>1<br>3<br>4 || style="text-align:center;"| -2.00<br>---<br>-1.60<br>-2.00 || style="text-align:center;"| -6.20<br>-2.40<br>-3.20<br>-6.20 || style="text-align:center;"| -42.00<br>---<br>-33.00<br>-42.00 || style="text-align:center;"| -130.00<br>-50.00<br>-67.00<br>-130.00 || style="text-align:center;"| [http://rpm.rcabc.org/images/9/99/SOP-MARS3.pdf '''MARS Test Report 3''']<br>[http://rpm.rcabc.org/images/e/e8/SOP-MARS4.pdf '''MARS Test Report 4''']<br>[http://rpm.rcabc.org/images/c/c1/SOP-MARS5.pdf '''MARS Test Report 5''']<br>[http://rpm.rcabc.org/images/0/0b/SOP-MARS10.pdf '''MARS Test Report 10'''] || style="text-align:center;"| exp. Service Inc. || style="text-align:center;"| PUB-DRU168540<br>PUB-DRU168534<br>PUB-DRU206751<br>PUB-DRU339156
 
|-
 
|-
 
|}
 
|}
 
   </table>
 
   </table>
 
</div>
 
</div>

Latest revision as of 14:26, 7 April 2020

Primary Material Secondary Materials & Deck Tested Assembly Report Data
Manufacturer Membrane Insulation
Overlay
Insulation Deck
Overlay
Deck Tested
Systems
kPa Psf Downloadable
Test Report
Test Facility Test Facility
Report No.
Low High Low High
IKO Industries Ltd. Fast-N-Stick-180 Base ---- ---- ---- Steel 2 -1.90 -4.8 -40.00 -100.00 MARS Test Report 1 exp. Service Inc. PUB-DRU292551
IKO Industries Ltd. Fast-N-Stick HD Base ---- ---- ---- Steel 3 -2.40 -5.10 -50.00 -106.00 MARS Test Report 2 exp. Service Inc. PUB-DRU285771
Soprema Inc. Soprafix Base 630 ---- ---- ---- Steel
Steel
Steel
Steel
4
1
3
4
-2.00
---
-1.60
-2.00
-6.20
-2.40
-3.20
-6.20
-42.00
---
-33.00
-42.00
-130.00
-50.00
-67.00
-130.00
MARS Test Report 3
MARS Test Report 4
MARS Test Report 5
MARS Test Report 10
exp. Service Inc. PUB-DRU168540
PUB-DRU168534
PUB-DRU206751
PUB-DRU339156