Manufacturers:IKO Industries Ltd.

Division C - Accepted Materials

---

IKO Industries Ltd.
Associate Member (Manufacturer)

Materials Listed by Category The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website http://www.iko.com/comm/ Contact Address See the current Membership list and contact information at www.rcabc.org Country of Origin Canada Country of Manufacture Canada, U.S.A. Year First Installed BC: Canada: Foreign:

Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015. The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024). Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.

Waterproofing Roofs

---

Insulation

Polyisocyanurate Foam

IKOTherm III

Insulation Overlay Panels

Asphaltic Overlays

Protectoboard

High-density Insulation Overlays

IKOTherm Covershield

Composite and Membrane-laminated Overlays

Protectobase 180

Protectobase 180 Sanded

Protectobase 95

ShieldBase 180

ShieldBase 180 Sanded

Bitumen (BUR)

Modi-Melt SEBS

Felts (BUR)

Organic Felts

No. 15 Perforated Asphalt Felt

Glass-fibre Felts

Type IV Glass Ply Sheet

Type VI Glass Ply Sheet

SBS Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets

Armourbond Flash

Armourbond Flash HD

Armourbond 180

Armourbond Flash Sand HD

ArmourStick HD Base

Armourvent Base

Fast-N-Stick-180 Base

Fast-N-Stick HD Base

Modiflex HD-FS-Base

Modiflex HD-SS-Base

Modiflex MF-95 F/S

Modiflex MF-95 S/S

Modiflex MP-180 F/S 3 mm

Modiflex MP-180 F/S

Waterproofing Roofs

---

SBS Polymer-Modified Bituminous Membranes (Cont.)

(See the membrane tables in Division C)

Base Sheets (Cont.)

Modiflex MP-180 S/S 3 mm

Modiflex MP-180 SS

Torchflex HD-FF-Base

Torchflex TF-95 FF 2.2 mm

Torchflex TF-95 FF

Torchflex TP-180 FF

Torchflex TP-180 SF (3.0 mm)

Torchflex TP-250 FF

Torchflex Ultra TP-HD-Base

Armourbridge/Pont

Cap Sheets

Armourcool Granular TP-HD Cap

ArmourStick HD Cap

Modiflex MP-180 Cap

Modiflex MP-250 Cap

Modiflex MP-HD-Cap

Torchflex TP-250 Cap 5mm

Torchflex TP-250 Cap

Torchflex TP-HD-Cap

Torchflex Ultra TP-HD-Cap

Prevent Armourcool HD Cap

Prevent MP 180 Cap 3.5 mm

Prevent TP 180 Cap 4 mm

PrevENt MP 250 Cap 4 mm

PrevENt MP-HD-Cap

PrevENt TP 250 Cap 4 mm

Prevent TP-HD-Cap

Prevent Premium TP 250 Cap 4 mm

Armourtread

Carrara Armourcool HD

APP Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets

Armourplast Classic (awaiting TDS)

Cap Sheets

Armourplast Granular

TPO Membranes

(See the membrane tables in Division C)

Innovi TPO

PMMA Membranes (System)

(See the membrane tables in Division C)

Metatech Field

Liquid Membrane Flashing Systems

(See the membrane tables in Division C)

Two-Component Reinforced Liquid Membrane Flashing

Metatech Flashing

Single-component Liquid Membrane Flashing

MS Detail

Waterproofing at Grade

---

SBS-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets

Armourbridge/Pont

Armourbond Flash

Modiflex MP-180 F/S

Torchflex TF-95 FF

Torchflex TP-180 FF

Cap Sheets

Torchflex TP-250 Cap

Water-shedding Roofs

---

Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)

Mechanically Fastened Materials

Roofgard Cool Grey Underlayment

SBS Deck Base 44

Stormtite

Self-adhered Materials

Stormshield Ice and Water Protector

44 Stormshield

Armourgard Ice and Water Protector

Underlayment/Eave Protection (ASM)

Self-adhered Materials

Stormshield Ice and Water Protector

44 Stormshield

Armourgard Ice and Water Protector

Asphalt Shingles

Armourshake

Cambridge

Nordic (formerly Cambridge IR)

Dynasty

RoofShake HW

Royal Estate

Biltmore (CRC-labeled)

---

Home

© RCABC 2024
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Accept Terms Of Use

We use cookies to enhance your browsing experience and analyze website traffic. By clicking "Agree" or continuing to browse our website, you consent to the use of cookies and agree to the Roofing Practices Manual Terms Of Use.

Agree