Difference between revisions of "SBS Low Door Opening"

Revision as of 14:48, 3 February 2021

RoofStar Guarantee Standards are blue-linked

SBS Details

File:SBS 10.3.7.1.jpg

(1) Primary Roof Membrane
(2) Membrane Flashing: Carried up wall minimum 200 mm (8") above roof surface. At door sill openings membrane flashing may be less than 200mm (8") in height but must not be less than 100mm (4") in height above the primary roof membrane. When door sills are less than 200mm (8") a metal waterstop flashing must be mechanically attached to backside of door sill framing or opening and be sealed with membrane flashing. Membrane gussets must be installed at door sill opening corners.
(3) Protection/Drainage Layer: Optional
(4) Metal Base Flashing: Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.
(5) Metal Counter-flashing
(6) Metal Water-stop Flashing: Mechanically attached to inside of door sill framing or opening. Cut flashing to fit opening and install membrane gussets at corners.
(7) Metal Pan Sill Flashing: Optional - Metal pan with water stop formed with pan folded, welded or soldered corners mechanically attached to inside of door sill frame or opening and sealed with membrane flashing.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

@@ Line 7: / Line 7: @@
 <div class="col-md-6">
 <div style="text-align:center; vertical-align:center">
-[[File:10.3.3.5.jpg|class=img-responsive]]
+[[File:SBS 10.3.7.1.jpg|class=img-responsive]]
 </div>
 </div><!-- COL-MD-6 -->