Difference between revisions of "CSA Tested Assemblies Draft 3"

Latest revision as of 16:29, 15 November 2021

Using the TablesAdditional NotesSBS Membrane AssembliesEPDM Membrane AssembliesTPO Membrane AssembliesPVC Membrane AssembliesBUR Assemblies

NOTICE to READER

Before you use these tables, make sure you know the wind load requirements for the roof under design or construction. You can find guidance in Part 3 SECURING the ROOF ASSEMBLY of the membrane system that is specified. Specified Wind Loads for the three principal roof zones may be calculated either by using the formulae in the British Columbia Building Code, 4.1.7 Wind Loads, or by using the National Research Council's online tool, Wind-RCI online wind calculator.

Table Structure and Organization

The tables on the adjacent tabs display data drawn from, and links to, Tested Assembly Reports listed by the membrane type shown on the tab heading. All test reports are downloadable from the "Test Report" column, and are catalogued under a RoofStar numbering system that may differ from the number designation on the report. Dynamic Wind Uplift (DUR) values are shown in columns near the left side of the tables. Only the DUR and Manufacturer columns are sortable; to sort a column, click the column heading. Click on any drop-down button to try the demo table below.

Tested Assembly Report Data					Primary Materials			Other System Materials & Deck
Manufacturer	Dynamic Uplift Resistance		Roof Assembly Summary	Test Report	Cap Membrane	Base Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Manufacturer	kPa	Psf	Roof Assembly Summary	Test Report	Cap Membrane	Base Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Manufacturer	-1.9	-40	EXAMPLE ONLY Cap membrane: application/securement method Base membrane: mechanically fastened Insulation overlay: (optional) various securement options Insulation (top layer): mechanically fastened Insulation (bottom layer): N/A Air/Vapour control layer: various securement options Deck overlay (thermal barrier): various securement options Roof deck	Report link 1-A	Membrane Option 1 Membrane Option 2 Membrane Option 3	Membrane Option 1 Membrane Option 2 Membrane Option 3	1, 2 or 3	Insulation overlay Option 1 Insulation overlay Option 2 Insulation overlay Option 3	Insulation Option 1 Insulation Option 2 Insulation Option 3	Deck overlay Option 1 Deck overlay Option 2 Deck overlay Option 3	Deck type

Each row displays one test for a particular system of securement. That means that the DUR derived for that test is based on a particular pattern of fasteners or adhesive application. Most assemblies were tested with one system of securement, but some were tested with as many as four. When this is the case, the same report number will be displayed with test report names such as [Manufacturer X] MARS 1-A and [Manufacturer X] MARS 1-B. Read the test report details to see what was changed in the securement system that affected the DUR for the assembly.

Every table displays Tested Assembly report data in easy-to-read rows with drop-down buttons that display key information for each assembly (see the working example above). When the Tested Assembly uses a membrane with 2 or more plies, each membrane and its options is listed in separate columns.

Note that some tests were conducted without one or more of these constituent components and may list those materials as "optional". When a material category such as "insulation overlay" is absent from the test, the drop-down menu will indicate its absence with "N/A" or as "optional". Occasionally, a missing material poses a conflict with the RoofStar Guarantee Standards. When the conflict is obvious, the Roof Assembly Summary will normally flag this with a note at the bottom of the list. Notwithstanding these notes, the reader is responsible to understand and apply the RoofStar Guarantee Standards regardless of the Tested Assembly report (see below under Tested Assemblies and RoofStar Guarantee Standards).

The Roof Assembly Summary provides a quick overview of how the roof assembly is secured. This feature of the tables will be especially helpful when searching for a suitable PARS assembly, because the placement of mechanical fasteners within an assembly can vary widely. Note, however, that the summaries do not list sizes, types or spacing of specific adhesives or fasteners; these details must be obtained from a careful reading of the Tested Assembly report.

Contents Specified Wind Loads and User Responsibility CSA-A123.21 and Tested Assembly Reports Tested Assemblies and RoofStar Guarantee Standards Accepted Materials and Material Substitutions Specified Wind Loads and User Responsibility The tables on this page display a collection of test data and downloadable reports offered for the purpose of designing and constructing a roof capable of resisting negative wind pressures, commonly referred to as "wind uplift" loads. The data and reports are offered without endorsement by the RCABC; they are provided as a courtesy by the RoofStar Guarantee Program to assist the Design Authority with the task of designing a roof that satisfies Code requirements, that meets the designer's specific and numerous design preferences, and that will qualify for a RoofStar Guarantee. The British Columbia Building Code (or the Code having jurisdiction) requires a roof to be capable of resisting Specified Wind Loads (see the British Columbia Building Code, Part 4 (4.1.7 Wind Loads) and Part 5 (5.2.2.2 Determination of Wind Load), inclusive of the notes in the appendices). The reader will note that there are optional pathways by which a membrane roof design can comply with the Code. One pathway is the use of a "Tested Assembly" - a roof assembly tested in controlled laboratory conditions to resist simulated wind pressures and gusts. The test must be conducted in strict conformity to CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane roofing systems (CSA-A123.21). The results of the test are published in a report signed off by the accredited testing agency. Each report details the materials and securement methods of the assembly. Every detail in a Tested Assembly report is critical for the performance of a roof designed on the basis of the tested assembly. CSA-A123.21 classifies assembly tests by the method of securement, and these are simplified with three acronyms: AARS (Adhesive Applied Roof Systems) PARS (Partially Adhered Roof Systems) MARS (Mechanically Attached Roof Systems). For a fuller explanation of these three classifications, see Part 3 SECURING the ROOF ASSEMBLY of the membrane system that is specified. CSA-A123.21 requires that the published test limits for a roof system be adjusted by dividing the final test value by a safety factor of 1.5. This factor reduces the actual test results in order to account for variables that a laboratory cannot test for, such as strong wind gusts or sudden wind shifts. The tables displayed in the tabs to the right show only the adjusted Dynamic Uplift Resistance (DUR) values and can be validated by reviewing the downloadable test reports. It is imperative that the user of these reports become familiar with the structure and content typical in a Tested Assembly report. While you will see that each accredited testing agency publishes test results in their own preferred format, there is general consistency among the report styles in the type of data each report provides: a designation of the securement system (AARS, PARS or MARS), although some reports do not do this and the classification of the test can be determined only by reading the report the DUR (most reports make this explicit at or near the top of the report although there are some reports that provide the DUR within the report text) a list of tested and alternate materials how each material was secured, and the size of fasteners or the types of adhesive used. All of these variables, and more, affect the performance of the roof assembly. Care must therefore be taken to collect and analyze all this information in relation to the limitations of the building and the roof, and all these details (for example, the specific name of the adhesive and how it was applied) must be included in the design specifications that will ultimately guide the construction of the roof. CSA-A123.21 and Tested Assembly Reports The CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane roofing systems (CSA-A123.21) is, properly speaking, a test for membrane roof systems where the membrane is exposed to the weather. Consequently, you will not find Tested Assembly reports that apply to Protected Membrane Roof Assemblies (where the membrane lies beneath the constituent components of a roof assembly). To secure PMRAs, refer to Part 3 of the membrane system that is specified. A few roof systems were tested without insulation. Most of these were tested on a plywood deck, but some were tested on steel. Because these assemblies are listed together with reports for insulated roofs (also referred to as compact or conventional), the reader should always look beyond the DUR and read the test report in order to understand the entire assembly. Each Tested Assembly report displays the date the assembly was tested and often will also publish the anticipated revaluation date. Some of the test reports available for download in the tables on this page have passed the revaluation date, but may still be valid; while we attempt to make available current test reports, we leave older reports available through the RPM because the assembly may have been retested but we have not been provided with a new test report. The reader is responsible to check with the manufacturer who owns the test report, to verify that the validity of the test and the published DURs. Tested Assemblies and RoofStar Guarantee Standards Tested Assembly reports must always be read together with the RoofStar Guarantee Standard for the membrane system that is specified. For example, a roof assembly might be tested with a particular material or in a particular way that does not conform to the Standard. To conform to the Standard, some modifications to the Tested Assembly may be required, which may then preclude its use - for example, adding an insulation overlay panel where none was tested, because the assembly design requires one in order to conform to the Standard. When a conflict is apparent or obvious the Design Authority may find a way to 'yes' by examining the alternative materials listed in many Tested Assembly reports. Alternatives include membranes, insulation overlays, insulation panels and roof deck overlays (commonly listed as "thermal layers"). Some materials are listed as "optional" which means that while the assembly was tested without the constituent material (a deck overlay, for example), the Design Authority may opt to use one of the materials listed in the report. Drop-down menus of the tables displayed to the right (see the "View options" buttons) list Accepted Materials that can be used in each Tested Assembly. Air or vapour control layers are not listed, because the RoofStar Guarantee Program does not accept and list these materials within Division C of the RPM. If in doubt about how to use the Tested Assembly reports together with the RoofStar Guarantee Standard, contact the RoofStar Guarantee Program via email, or by calling (604) 882-9734. Accepted Materials and Material Substitutions We have selected Tested Assembly reports based on the membranes that will qualify for a RoofStar Guarantee Program, but there are tested assemblies that include one or more Secondary Materials that are not Accepted by the RoofStar Guarantee Program. Drop-down lists clearly show this by indicating when a material is "not accepted". To ensure that the entire roof system complies with the Accepted Material requirements of the RoofStar Guarantee Program, follow the requirements in 3.2.1 Material Substitutions in Tested Assemblies: "When a manufacturer's Tested Assembly incorporates materials (and listed alternates) that are not part of the RoofStar Guarantee Program, the Design Authority must identify appropriate substitutions for those materials from the list of RoofStar-accepted Materials and consult the manufacturer concerning compatibility with the Tested Assembly. and direct the user to consult the membrane manufacturer in order to determine which Accepted materials will qualify as alternates."


Tested Assembly Report Data					Primary Materials			Other System Materials & Deck
Manufacturer	Dynamic Uplift Resistance		Roof Assembly Summary	Test Report	Cap Membrane	Base Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Manufacturer	kPa	Psf	Roof Assembly Summary	Test Report	Cap Membrane	Base Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type


Click arrows to sort
Henry Company Canada	-3.83	-80	Cap membrane: torch-applied or hot-mopped (see material specifications) Base membrane: various securement options Insulation overlay: DensDeck® Prime with EONIC Roof Board Insulation (top layer): none listed Insulation (bottom layer): none listed Air/Vapour control layer: (optional) adhered Deck overlay (thermal barrier): (optional) adhered Roof deck	HEN AARS 1-A	ModifiedPLUS NP180g T4 ModifiedPLUS NP250g M4 ModifiedPLUS NP180g M4	Modified Plus NP180 p/p Modified Plus G100 p/p Modified Plus G100 p/s Modified Plus G100 s/s Modified Plus G100 s/s Modified Plus NP180 Tack	2	DensDeck® Prime with EONIC Roof Board	None listed	None listed	Steel
Henry Company Canada	-4.79	-100	Cap membrane: torch-applied or hot-mopped (see material specifications) Base membrane: hot-mopped Insulation overlay: none listed Insulation (top layer): adhered with hot asphalt Insulation (bottom layer): adhered with hot asphalt Air/Vapour control layer: adhered with hot asphalt Deck overlay (thermal barrier): (optional) adhered with hot asphalt Roof deck	HEN AARS 2-A	ModifiedPLUS NP180g T4 ModifiedPLUS NP250g M4 ModifiedPLUS NP180g M4	Modified Plus NP180 p/p Modified Plus G100 p/p Modified Plus G100 p/s Modified Plus G100 s/s Modified Plus G100 s/s Modified Plus NP180 Tack	2	(Optional) No Accepted Material: Consult manufacturer	No Accepted Material: Consult manufacturer	Optional: DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-4.8	-100	Cap membrane: torch-applied or adhered with hot asphalt* Base membrane: adhered with hot asphalt Insulation overlay: adhered with hot asphalt Insulation (top layer): adhered with hot asphalt Insulation (bottom layer): N/A Air/Vapour control layer: adhered with hot asphalt Deck overlay (thermal barrier): adhered Roof deck * refer to product specifications	IKO AARS 1-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Modiflex MP-180 Cap Modiflex MP-250-Cap	Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MP-180 F/S Modiflex MP-180 SS Modiflex MP-180 F/S	2	Protectoboard Protectobase 95 Protectobase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board DensDeck® Roofboard Securerock Gypsum Fibre Roof Board Securerock Glass-Mat Roof Board	Steel
IKO Industries Ltd.	-2.4	-50	Cap membrane: torch-applied or adhered* Base membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: adhered Deck overlay (thermal barrier): N/A Roof deck * refer to product specifications	IKO AARS 2-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Modiflex MP-180 Cap Modiflex MP-250-Cap	Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MP-180 F/S Modiflex MP-180 SS Modiflex MP-180 F/S	2	Protectoboard Protectobase 95 Protectobase 180	IKOTherm III	N/A	Steel
IKO Industries Ltd.	-4.2	-87	Cap membrane: torch-applied or adhered* Base membrane: torch-applied or adhered* Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: adhered Deck overlay (thermal barrier): N/A Roof deck * refer to product specifications	IKO AARS 3-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Modiflex MP-180 Cap Modiflex MP-250-Cap	Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MP-180 F/S Modiflex MP-180 SS Modiflex MP-180 F/S	2	Protectoboard	IKOTherm III	N/A	Steel
IKO Industries Ltd.	-4.2	-87	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: torch-applied on primer Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 4-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MP-180 F/S Modiflex MP-180 SS Modiflex MP-180 F/S 3 mm	2	Protectoboard	IKOTherm III	DensDeck® Prime with EONIC Roof Board DensDeck® Roofboard Securerock Gypsum Fibre Roof Board Securerock Glass-Mat Roof Board	Steel
IKO Industries Ltd.	-4.8	-100	Cap membrane: torch-applied or hot-mopped with asphalt* Base membrane: torch-applied or hot-mopped with asphalt* Insulation overlay: adhered with hot asphalt Insulation (top layer): adhered with hot asphalt Insulation (bottom layer): N/A Air/Vapour control layer: adhered with hot asphalt Deck overlay (thermal barrier): adhered Roof deck * refer to product specifications	IKO AARS 5-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 SS Modiflex MP-180 F/S Modiflex MP-180 S/S	2	Protectoboard Protectobase 95 Protectobase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board DensDeck® Roofboard Securerock Gypsum Fibre Roof Board Securerock Glass-Mat Roof Board	Steel
IKO Industries Ltd.	-2.4	-50	Cap membrane: adhered Base membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: adhered Deck overlay (thermal barrier): N/A Roof deck	IKO AARS 6-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 SS Modiflex MP-180 F/S Modiflex MP-180 S/S No. 15 Perforated Asphalt Felt Type IV Glass Ply Sheet Type VI Glass Ply Sheet	2	Protectoboard Protectobase 95 Protectobase 180	IKOTherm III	N/A	Steel
IKO Industries Ltd.	-4.2	-87	Cap membrane: adhered Base membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: adhered Deck overlay (thermal barrier): N/A Roof deck	IKO AARS 7-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 S/S	2	Protectoboard	IKOTherm III	N/A	Steel
IKO Industries Ltd.	-3.8	-80	Cap membrane: adhered Base membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: adhered Deck overlay (thermal barrier): N/A Roof deck	IKO AARS 8-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 S/S Modiflex MP-180 F/S 3 mm Modiflex HD-FS-Base	2	Protectoboard Protectobase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-2.4	-50	Cap membrane: adhered Base membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: adhered Deck overlay (thermal barrier): N/A Roof deck	IKO AARS 9-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 S/S Modiflex MP-180 F/S 3 mm Modiflex HD-FS-Base	2	Protectoboard Protectobase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-3.8	-80	Cap membrane: torch-applied Base membrane: self-adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 10-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap	Armourvent Base	2	IKOTherm Covershield	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-3.4	-70	Cap membrane: hot-mopped with asphalt* Base membrane: hot-mopped with asphalt Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): adhered Roof deck *"Cap" materials must be covered with UV-resistant gravel or a suitable alternative	IKO AARS 12-A	Type IV Glass Ply Sheet* No. 15 Perforated Asphalt Felt* *"Cap" materials must be covered with UV-resistant gravel or a suitable alternative	Modiflex MF-95 S/S	2	Protectoboard	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-3	-62.5	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 13-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 S/S Modiflex MP-180 F/S 3 mm Modiflex HD-FS-Base	2	Protectoboard Protectobase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-4.8	-100	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 14-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 S/S Modiflex MP-180 F/S 3 mm Modiflex HD-FS-Base	2	ShieldBase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-4.8	-100	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 15-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 S/S Modiflex MP-180 F/S 3 mm Modiflex HD-FS-Base	2	ShieldBase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-3	-62.5	Cap membrane: torch-applied Base membrane: self-adhered Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): N/A Roof deck	IKO AARS 16-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Armourvent Base	2	N/A	IKOTherm III	N/A	Steel
IKO Industries Ltd.	-4.2	-87	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 17-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MF-95 F/S Modiflex MP-180 F/S Modiflex MP-180 S/S Modiflex MP-180 F/S 3 mm Modiflex HD-FS-Base	2	Protectoboard ShieldBase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-3.6	-75	Cap membrane: torch-applied Base membrane: N/A (alternate: torch-applied) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 18-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	N/A (See Insulation Overlay) Torchflex TP-180 FF* *May be used together with Protectoboard as an alternate to Protectobase 180	2	Protectobase 180 Protectoboard* *May be used together with Torchflex TP-180-FF as an alternate to Protectobase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-5.5	-115	Cap membrane: torch-applied Base membrane: adhered Insulation overlay: N/A Insulation (top layer): N/A Insulation (bottom layer): N/A Air/Vapour control layer: N/A Deck overlay (thermal barrier): N/A Roof deck	IKO AARS 19-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	Armourbond Flash Armourbond Flash HD Armourbond 180 Armourbond Flash Sand HD	2	N/A	N/A	N/A	Plywood 17mm (5/8")
IKO Industries Ltd.	-5.5	-115	Cap membrane: torch-applied Base membrane: N/A (alternate: torch-applied) Insulation overlay: adhered Insulation (top layer): N/A Insulation (bottom layer): N/A Air/Vapour control layer: N/A Deck overlay (thermal barrier): N/A Roof deck	IKO AARS 20-A	Torchflex TP-250 Torchflex TP-HD Torchflex TP-250 5 mm Torchflex TP-180 Prevent TP-250 Prevent Premium TP-250 Prevent TP-HD Carrara Armourcool HD Prevent Armourcool HD Cap Modiflex MP-180 Cap Modiflex MP-HD-Cap Modiflex MP-250-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	N/A (See Insulation Overlay) Torchflex TP-180 FF* Modiflex MP-180 F/S* Modiflex MP-180 S/S* *May be used together with Protectoboard as an alternate to Protectobase 180	2	Protectobase 180 Protectoboard* *May be used together with Torchflex TP-180-FF as an alternate to Protectobase 180	N/A	N/A	Plywood 17mm (5/8")
IKO Industries Ltd.	-3.6	-75	Cap membrane: self-adhered Base membrane: self-adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered over primer Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 21-A	ArmourStick HD Cap	ArmourStick HD Base	2	Protectoboard	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
IKO Industries Ltd.	-7.2	-150	Cap membrane: self-adhered Base membrane: self-adhered over primer Roof deck	IKO AARS 22-A	ArmourStick HD Cap	ArmourStick HD Base	2	N/A	N/A	N/A	Plywood 17mm (5/8")
IKO Industries Ltd.	-5.5	-115	Cap membrane: adhered or hot-mopped Base membrane: adhered or hot-mopped (alternate: torch-applied) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: adhered Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 23-A	Modiflex MP-180 Cap Modiflex MP-250-Cap Prevent MP-HD-Cap	Modiflex MP-95 S/S Base Modiflex MP-180 S/S* Modiflex HD-S/S-Base	2	Protectobase 180 Protectoboard* *May be used together with Torchflex TP-180-FF as an alternate to Protectobase 180	N/A	N/A	Steel
IKO Industries Ltd.	-5.9	-122.5	Cap membrane: self-adhered Base membrane: self-adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 24-A	ArmourStick HD Cap Torchflex TP-180 Cap Torchflex TP-HD-Cap Torchflex TP-250 Torchflex TP-250 5 mm Prevent TP-250 Prevent TP-HD Prevent Premium TP-250 Armourcool Granular TP-HD Cap Prevent Armourcool HD Cap Carrara Armourcool HD Modiflex MP-180 Cap Modiflex MP-250-Cap Modiflex MP-HD-Cap Prevent MP 250 Cap 4 mm Prevent MP-HD-Cap	ArmourStick HD Base Torchflex TF-95 FF Torchflex TP-180 FF Torchflex HD-FF-Base Modiflex MF-95 S/S Modiflex MP-180 F/S Modiflex MP-180 SS Modiflex MP-180 F/S 3 mm	2	DensDeck® Prime with EONIC Roof Board	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
Siplast, Inc.	-2.87	-60	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	SIP AARS 1-A	Paradiene 30	Paradiene 20	2	Protectoboard (IKO)	Partherm CG	DensDeck® Prime with EONIC Roof Board	Steel
Siplast, Inc.	-3.35	-70	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: None listed Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): N/A Roof deck	SIP AARS 2-A	Paradiene 30	Paradiene 20	2	No Accepted Material: Consult manufacturer	No Accepted Material: Consult manufacturer	None listed	Steel
Siplast, Inc.	-3.4	-70	Cap membrane: torch-applied Base membrane: self-adhered Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): N/A Roof deck	SIP AARS 3-A	Paradiene 30 TG Paradiene 30 FR Paradiene 30 FR TG Paradiene 30 HT FR TG Paradiene 40 FR TG Parafor 30 TG Parafor 50 TG Veral AL (Aluminum)	Paradiene 20 SA Paradiene 20 HT SA Paradiene 20 EG SA	2	N/A	Paratherm CG AC Foam III IKITherm III	N/A	Steel
Siplast, Inc.	-2.3	-47	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): N/A Roof deck	SIP AARS 4-A	Paradiene 30 TG Paradiene 30 FR Paradiene 30 HT FR TG Paradiene 40 FR TG Parafor 30 TG Parafor 50 TG Veral AL (Aluminum) Parapro	Paradiene 20 TG Paradiene 20 EG TG Paradiene 20 HT TG Paradiene 20 HV TG	2	N/A	No Accepted Material: Consult manufacturer	N/A	Steel
Siplast, Inc.	-1.9	-40	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: Adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	SIP AARS 5-A	Paradiene 30 TG Paradiene 30 FR TG Paradiene 40 FR TG Parafor 30 TG Parafor 50 TG Parafor 50 LT Parapro	Paradiene 20 TG Paradiene 20 EG TG Paradiene 20 HT TG Paradiene 20 HV TG	2	Protectoboard (IKO)	Partherm CG AC Foam III IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
Siplast, Inc.	-3.9	-82	Cap membrane: torch-applied Base membrane: semi-adhered Insulation overlay: Adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	SIP AARS 6-A	Paradiene 30 TG Paradiene 30 HT FR TG Paradiene 40 FR TG Parafor 30 TG Parafor 50 TG Parafor 50 LT Veral AL (Aluminum)	Paradiene 20 SA Paradiene 20 HT SA Paradiene 20 EG SA Paradiene 20 TS SA	2	Paratherm HD IKOTherm Covershield Protectoboard (primed)	Partherm CG AC Foam III IKOTherm III	DensDeck® Prime with EONIC Roof Board Securerock Gypsum Fibre Roof Board	Steel
Siplast, Inc.	-5.2	-109	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: Adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	SIP AARS 7-A	Paradiene 30 TG Paradiene 30 FR TG Paradiene 30 HT FR TG Paradiene 40 FR TG Parafor 30 TG Parafor 50 TG Veral AL (Aluminum)	Paradiene 20 TG Paradiene 20 EG TG Paradiene 20 HT TG Paradiene 20 HV TG	2	Protectoboard (IKO)	Partherm CG AC Foam III IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel
Siplast, Inc.	-1.4	-30	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: Adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): N/A Roof deck	SIP AARS 8-A	Paradiene 30 TG Paradiene 30 FR TG Paradiene 30 HT FR TG Paradiene 40 FR TG Parafor 30 TG Parafor 50 TG Veral AL (Aluminum)	Paradiene 20 TG Paradiene 20 EG TG Paradiene 20 HT TG Paradiene 20 HV TG	2	DensDeck® Prime with EONIC Roof Board	Partherm CG AC Foam III IKOTherm III	N/A	Plywood 15mm (19/32")
Soprema Inc.	-4.3	-87.3	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	SOP AARS 1-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561 Colvent Traffic Cap FR 861	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	Sopraboard	Sopra-Iso Plus	Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4	-83.3	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhesive on primer Deck overlay (thermal barrier): N/A Roof deck	SOP AARS 2-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561 Colvent Traffic Cap FR 861	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	Sopraboard	Sopra-Iso Plus	N/A	Plywood 17mm (5/8")
Soprema Inc.	-2.9	-60	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): N/A Roof deck	SOP AARS 3-A	Sopralene Flam 250 GR	N/A (See Insulation)	2	No Accepted Material: Consult manufacturer	N/A	N/A	Steel
Soprema Inc.	-3	-63	Cap membrane: adhered with hot asphalt Base membrane: adhered with hot asphalt Insulation overlay: adhered with hot asphalt Insulation (top layer): adhered with hot asphalt Insulation (bottom layer): N/A Air/Vapour control layer: adhered Deck overlay (thermal barrier): adhered Roof deck	SOP AARS 4-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Colply Traffic Cap FR 461 Colply Traffic Cap 460	Elastophene 180 S Sopralene 180 PS Sopralene 180 S Sopralene 250 S	2	Sopraboard	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	DensDeck® Prime with EONIC Roof Board DensDeck® Roofboard Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-2.4	-50	Cap membrane: adhered Base membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	SOP AARS 5-A	Sopralene Flam 250 GR Colply Traffic Cap FR 461 Colply Traffic Cap 460	Elastophene 180 S Sopralene 180 S Sopralene 250 S	2	Sopraboard	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3	-63	Cap membrane: torch-applied Base membrane: self-adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 6-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Soprafix Traffic Cap 660	Colvent Base 830 (formerly Colvent Base 810)	2	Sopraboard	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.3	-90	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	SOP AARS 7-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	No Accepted Material: Consult manufacturer	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	No Accepted Material: Consult manufacturer	Steel
Soprema Inc.	-3.4	-72	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 8-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	Sopraboard	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.8	-100	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 8-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	Sopraboard	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3	-62	Cap membrane: torch-applied Base membrane: torch-applied or adhered with hot bitumen* Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer Deck overlay (thermal barrier): adhered Roof deck *refer to material specifications	SOP AARS 9-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	SopraRock DD Plus	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 10-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	SopraRock DD Plus	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3.9	-83	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 10-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	SopraRock DD Plus	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.6	-96	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 10-C	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	SopraRock DD Plus	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-1.9	-40	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 11-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Soprafix Traffic Cap 660 Soprafix Traffic Cap FR 661	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	SopraRock DD Plus	SopraRock DD Plus	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3.9	-83	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 11-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Soprafix Traffic Cap 660 Soprafix Traffic Cap FR 661	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	SopraRock DD Plus	SopraRock DD Plus	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3.6	-75	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 12-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A (See Insulation Overlay)	2	2-1 SopraSmart Board	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter) Plastispan HD Insulation (Type 2)* * See Part 7, RoofStar Guarantee Standards, concerning heat-sensitive insulation	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.2	-87	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 12-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A (See Insulation Overlay)	2	2-1 SopraSmart Board	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter) Plastispan HD Insulation (Type 2)* * See Part 7, RoofStar Guarantee Standards, concerning heat-sensitive insulation	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.3	-90	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 12-C	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A (See Insulation Overlay)	2	2-1 SopraSmart Board	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter) Plastispan HD Insulation (Type 2)* * See Part 7, RoofStar Guarantee Standards, concerning heat-sensitive insulation	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3.6	-75	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 13-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A (See Insulation Overlay)	2	2-1 SopraSmart Board ISO HD	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3.8	-80	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 13-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A (See Insulation Overlay)	2	2-1 SopraSmart Board ISO HD	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: adhered Insulation (top layer): (optional) adhered Insulation (bottom layer): (optional) adhered Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 14-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A (See Insulation Overlay)	2	3-1 SopraSmart Rock	Optional: Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: N/A (See Insulation Overlay) Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered on primer or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 15-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A (See Insulation Overlay)	2	2-1 SopraSmart Rock	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.2	-87	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): (optional) adhered Insulation (bottom layer): N/A Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	SOP AARS 16-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopraply Base 520	2	Sopraboard	No Accepted Material: Consult manufacturer	DensDeck® Prime with EONIC Roof Board Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.3	-90	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): (optional) adhered Insulation (bottom layer): N/A Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	SOP AARS 16-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopraply Base 520	2	Sopraboard	No Accepted Material: Consult manufacturer	DensDeck® Prime with EONIC Roof Board Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4	-83	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): N/A Roof deck	SOP AARS 17-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561 Soprafix Traffic Cap 660 Soprafix Traffic Cap FR 661 Colvent Traffic Cap FR 861	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	Sopraboard	Sopra-Iso Plus	N/A	Plywood 19mm (3/4")
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 18-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A	2	N/A	No Accepted Material: Consult manufacturer	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 18-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A	2	N/A	No Accepted Material: Consult manufacturer	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-3.4	-72	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 19-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	Sopraboard	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.8	-100	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 19-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	Sopraboard	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	(Optional) Securerock Gypsum Fibre Roof Board	Steel
Soprema Inc.	-4.3	-90	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	SOP AARS 20-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	Elastophene Flam Sopralene Flam 180 Sopralene Flam 250 Sopraply Base 520	2	No Accepted Material: Consult manufacturer	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	No Accepted Material: Consult manufacturer	Steel
Soprema Inc.	-3	-63	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): Air/Vapour control layer: self-adhered or torch-applied Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP AARS 21-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A	2	2-1 SopraSmart FB (formerly Soprabase FR 180)	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	Optional (none listed)	Steel
Soprema Inc.	-1.8	-37	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP-AARS 22-A	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A	2	2-1 SopraSmart Rock (formerly Xpress Board HD)	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	Optional (none listed)	Steel
Soprema Inc.	-1.9	-40	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP-AARS 22-B	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A	2	2-1 SopraSmart Rock (formerly Xpress Board HD)	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	Optional (none listed)	Steel
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP-AARS 22-C	Sopralene Flam 180 GR Sopralene Flam 250 GR Soprastar Flam HD GR Sopralene Mammouth GR Sopraply Traffic Cap 560 Sopraply Traffic Cap FR 561	N/A	2	2-1 SopraSmart Rock (formerly Xpress Board HD)	Sopra-Iso Plus ACFoam III (Atlas) ENRGY 3 CGF (JM) H-Shield CG (Hunter)	Optional (none listed)	Steel
Soprema Inc.	-3.4	-70	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: N/A Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP-AARS 23-A	Sopralene Flam 250 GR	N/A	2	2-1 SopraSmart Rock (formerly Xpress Board HD)	No Accepted Material: Consult manufacturer	Optional (none listed)	Steel
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): (optional) adhered Roof deck	SOP-AARS 24-A	Sopralene Flam 250 GR	N/A	2	2-1 SopraSmart FB (formerly Soprabase HD)	No Accepted Material: Consult manufacturer	Optional (none listed)	Steel
Soprema Inc.	-3.6	-75	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	SOP-AARS 25-A	Sopralene Flam 250 GR	Sopralene Flam 180	2	Sopraboard	No Accepted Material: Consult manufacturer	DensDeck® Prime with EONIC Roof Board	Steel
Soprema Inc.	-2.4	-50	Cap membrane: torch-applied Base membrane: N/A Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): N/A Roof deck	SOP-AARS 26-A	Sopralene Flam 250 GR	N/A	2	SopraSmart Board ISO HD	N/A	N/A	Steel
Tremco Ltd.	-2.5	-53	Cap membrane: torch-applied Base membrane: torch-applied Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: torch-applied Deck overlay (thermal barrier): adhered Roof deck	TRE AARS 1-A	No Accepted Material: Consult manufacturer	Torchflex TP-180 FF (IKO)	2	Protectoboard (IKO)	No Accepted Material: Consult manufacturer	DensDeck® Prime with EONIC Roof Board	Steel
Tremco Ltd.	-1.4	-29	Cap membrane: adhered Base membrane: N/A (See Composite Insulation) Insulation overlay: N/A Insulation (top layer): adhered Insulation (bottom layer): N/A Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	TRE AARS 2-A	No Accepted Material: Consult manufacturer	Modiflex MP-180 SS (IKO)	2	N/A	No Accepted Material: Consult manufacturer	DensDeck® Prime with EONIC Roof Board	Steel


Tested Assembly Report Data					Primary Materials			Other System Materials & Deck
Manufacturer	Dynamic Uplift Resistance		Roof Assembly Summary	Test Report	Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Manufacturer	kPa	Psf	Roof Assembly Summary	Test Report	Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Elevate (formerly Firestone)	-2	-41	Membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): (optional) adhered Roof deck	FIR AARS 1-A	Rubbergard EPDM Rubbergard EcoWhite EPDM	1	ISOGard HD Cover Board Securerock Gypsum Fibre Roof Board	Resista	(Optional) DensDeck® Prime with EONIC Roof Board DensDeck® Roofboard Securerock Gypsum Fibre Roof Board	Steel


Tested Assembly Report Data					Primary Materials			Other System Materials & Deck
Manufacturer	Dynamic Uplift Resistance		Roof Assembly Summary	Test Report	Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Manufacturer	kPa	Psf	Roof Assembly Summary	Test Report	Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Elevate (formerly Firestone)	-2.4	-50	Membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: adhered or loose-laid Deck overlay (thermal barrier): (optional) adhered Roof deck	FIR AARS 2-A	Ultraply 1.2 mm TPO Ultraply 1.6 mm TPO UltraPly XR 100 UltraPly XR 115	1	ISOGard HD Cover Board Securerock Gypsum Fibre Roof Board	Resista	(Optional) DensDeck® Prime with EONIC Roof Board MDensDeck® Roofboard Securerock Gypsum Fibre Roof Board	Steel
IKO Industries Ltd.	-4.19	-87.5	Membrane: adhered Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	IKO-AARS 25-A	Innovi 1.1 mm TPO Innovi 1.5 mm TPO Innovi 1.9 mm TPO	1	IKOTherm CoverShield DensDeck® Prime with EONIC Roof Board Securerock Gypsum Fibre Roof Board	IKOTherm III	Securerock Gypsum Fibre Roof Board	Steel
IKO Industries Ltd.	-2.39	-50	Membrane: adhered Insulation overlay: (optional) adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	IKO-AARS 26-A	Innovi 1.1 mm TPO Innovi 1.5 mm TPO Innovi 1.9 mm TPO	1	DensDeck® Prime with EONIC Roof Board Securerock Gypsum Fibre Roof Board	IKOTherm III	Securerock Gypsum Fibre Roof Board	Steel

No Tested Assemblies submitted


Tested Assembly Report Data					Primary Materials			Other System Materials & Deck
Manufacturer	Dynamic Uplift Resistance		Roof Assembly Summary	Test Report	Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
Manufacturer	kPa	Psf	Roof Assembly Summary	Test Report	Membrane	Plies	Insulation Overlay	Insulation	Deck Overlay	Deck Type
IKO Industries Ltd.	-4.9	-100	Membrane: 4 plies mopped with hot bitumen Insulation overlay: adhered Insulation (top layer): adhered Insulation (bottom layer): adhered Air/Vapour control layer: self-adhered Deck overlay (thermal barrier): adhered Roof deck	IKO AARS 11-A	No. 15 Perforated Asphalt Felt Type IV Glass Ply Sheet Type VI Glass Ply Sheet	4	Protectoboard Protectobase 180	IKOTherm III	DensDeck® Prime with EONIC Roof Board	Steel

Home

@@ Line 1: / Line 1: @@
-<div class="row">
-   <div class="col-md-1" style="float:right;" id="tocDiv">
-      __TOC__
-   </div> <!-- tocDiv -->
-  <div class="col-md-11" id="mainBodyDiv">
-==MARS==
 <tabs>
-<tab name="MARS Tested Assembly reports and data">
+<tab name="Using the Tables">
 {| class="wikitable"
 |-
-| style="background-color: #F0E68C;" column-width:100%" | <big><big>About the Tables</big></big>
+| style="color: black; |
+<big><big>'''NOTICE to READER'''</big></big>
-The tables on the adjacent tabs display data drawn from, and links to, '''Tested Assembly Reports''' listed by the membrane type shown on the tab.  Dynamic Wind Uplift (DUR) values are shown in columns near the left side of the tables.  Only the DUR and Manufacturer columns are sortable; to sort a column, click the column heading.
-Each row displays one test for a particular system of securement.  That means that the DUR derived for that test is based on a particular pattern of fasteners or adhesive application.  Most assemblies were tested with one system of securement, but some were tested with as many as four.  When this is the case, the same report number will be displayed with test report names such as ''IKO MARS 1-A'' and ''IKO MARS 1-B''.  Read the test report details to see what was changed in the securement system that affected the DUR for the assembly.
+Before you use these tables, make sure you know the wind load requirements for the roof under design or construction.  You can find guidance in '''Part 3''' [http://rpm.rcabc.org/index.php?title=Securing_the_Roof_Assembly '''SECURING the ROOF ASSEMBLY'''] of the membrane system that is specified.  ''Specified Wind Loads'' for the three principal roof zones may be calculated either by using the formulae in the ''British Columbia Building Code'', 4.1.7 Wind Loads, or by using the National Research Council's online tool, [https://www.nrc-cnrc.gc.ca/eng/services/windrci/agreement.html '''Wind-RCI online wind calculator'''].
+|-
+| style="background-color: #ffffcc;" column-width:100%" |
 <big><big>Table Structure and Organization</big></big>
-Every table displays Tested Assembly report data in easy-to-read rows with drop-down buttons that display key information for each assembly (see the "try me" example below).  Each button displays one or more options for
+The tables on the adjacent tabs display data drawn from, and links to, '''Tested Assembly Reports''' listed by the membrane type shown on the tab heading.  All test reports are downloadable from the "Test Report" column, and are catalogued under a RoofStar numbering system that may differ from the number designation on the report.  Dynamic Wind Uplift (DUR) values are shown in columns near the left side of the tables.  Only the DUR and Manufacturer columns are sortable; to sort a column, click the column heading.
-*roof membrane
+<span style="color:#FF0000"> '''Click on any drop-down button to try the demo table below.'''</span>
-*insulation overlay
+<table class="table">
-*insulation panels and
+{|	class="wikitable sortable"  style="margin-left: 20pt; margin-right: auto; border-color:#E7E9E9;"
-*the deck overlay.
+!		colspan="5" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#4682b4"	|		<span style="color:#fff">Tested Assembly Report Data</span>
-<br>
+!		colspan="3" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#808080"	|		<span style="color:#fff">Primary Materials</span>
-When the Tested Assembly uses a membrane with 2 or more plies, they are displayed in separate columns.
+!		colspan="4" rowspan="1"; style="vertical-align:center;text-align:center; background-color:#A9A9A9"	|		<span style="color:#fff">Other System Materials & Deck</span>
+|-
-<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-success dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Material option 1</a></li><li><a href="#">Material option 2</a></li><li><a href="#">Material option 3</a></li>
+!		colspan="1" rowspan="2" style=style="width:250px; vertical-align:center;text-align:center;" 	|		Manufacturer
-</ul></div></html>
+!		colspan="2" rowspan="1" style="vertical-align:top;background-color:#c8ccd1"	|		Dynamic Uplift Resistance
-<span style="color:#FF0000"> Try me</span>
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Roof<br>Assembly<br>Summary
-<br>
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Test Report
-<br>
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;" 	|		Cap<br>Membrane
-Deck types tested with the Assembly are shown in the far right column.
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Base<br>Membrane
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Plies
-Some tests were conducted <u>without</u> one or more of these constituent components and may list those materials as "optional".  When a material category such as "insulation overlay" is absent from the test, the drop-down menu will indicate its absence with "N/A" or as "optional".  Occasionally, a missing material poses a conflict with the '''''RoofStar Guarantee Standards'''''.  When the conflict is obvious, the Roof Assembly Summary will normally flag this with a note at the bottom of the list.  Notwithstanding these notes, the reader is responsible to understand and apply the '''''RoofStar Guarantee Standards''''' regardless of the Tested Assembly report (see below under '''Tested Assemblies and RoofStar Guarantee Standards''').
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Insulation<br>Overlay
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Insulation
-The Roof Assembly Summary provides a quick overview of how the roof assembly is secured.  This feature of the tables will be especially helpful when searching for a suitable PARS assembly, because the placement of mechanical fasteners can vary widely.  Note, however, that the summaries do not list sizes, types or spacing of specific adhesives or fasteners; these details must be obtained from a careful reading of the Tested Assembly report.
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Deck<br>Overlay
-|-
+!		class="unsortable" colspan="1" rowspan="2" style="vertical-align:center;text-align:center;"	|		Deck<br>Type
-| style="color: black; background-color: #ffffcc; width: 100%;text-align:left" |
+|-
-<big><big>Specified Wind Loads and User Responsibility</big></big>
+!		colspan="1" rowspan="1" style="width:40px;vertical-align:top; background-color:#c8ccd1"	|		<span style="color:#2a4b8d">kPa</span>
+!		colspan="1" rowspan="1" style="width:40px;vertical-align:top; background-color:#c8ccd1"	|		<span style="color:#2a4b8d">Psf</span>
-Before you use these tables, know the wind load requirements for the roof under design or construction.  You can find guidance in '''Part 3''' [http://rpm.rcabc.org/index.php?title=Securing_the_Roof_Assembly '''SECURING the ROOF ASSEMBLY'''] of the membrane system that is specified.  Specified Wind Loads for the three principal roof zones may be calculated either by using the formulae in the ''British Columbia Building Code'', 4.1.7 Wind Loads, or by using the National Research Council's online tool, [https://www.nrc-cnrc.gc.ca/eng/services/windrci/agreement.html '''Wind-RCI online wind calculator'''].
+|-
+|												Manufacturer
-The tables on this page display a collection of test data and downloadable reports offered for the purpose of designing and constructing a roof capable of resisting negative wind pressures, commonly referred to as "wind uplift" loads.  The data and reports are offered without endorsement by the RCABC; they are provided as a courtesy by the '''''RoofStar Guarantee Program''''' to assist the ''Design Authority'' with the task of designing a roof that satisfies Code requirements, that meets the designer's specific and numerous design preferences, and that will qualify for a '''''RoofStar Guarantee'''''.
+|	style="vertical-align:center;text-align:center;" |	<b>										-1.9	</b>
+|	style="vertical-align:center;text-align:center;" |	<b>										-40	</b>
-The ''British Columbia Building Code'' (or the Code having jurisdiction) requires a roof to be capable of resisting ''Specified Wind Loads'' (see the ''British Columbia Building Code, Part 4 (4.1.7 Wind Loads) and Part 5 (5.2.2.2 Determination of Wind Load)'', inclusive of the notes in the appendices).  The reader will note that there are optional pathways by which a membrane roof design can comply with the Code.  One pathway is the use of a "Tested Assembly" - a roof assembly tested in controlled laboratory conditions to resist simulated wind pressures and gusts.  The test must be conducted in strict conformity to ''CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane roofing systems'' (''CSA-A123.21'').  The results of the test are published in a report signed off by the accredited testing agency.  Each report details the materials and securement methods of the assembly.  Every detail in a Tested Assembly report is critical for the performance of a roof designed on the basis of the tested assembly.
+|		<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-warning dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View summary<span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#"><b>EXAMPLE ONLY</b></a></li><li><a href="#"><b>Cap membrane</b>: application/securement method</a></li><li><a href="#"><b>Base membrane</b>: mechanically fastened</a></li><li><a href="#"><b>Insulation overlay</b>: (optional) various securement options</a></li><li><a href="#"><b>Insulation (top layer)</b>: mechanically fastened</a></li></li><li><a href="#"><b>Insulation (bottom layer)</b>: N/A</a></li><li><a href="#"><b>Air/Vapour control layer</b>: various securement options</a></li><li><a href="#"><b>Deck overlay (thermal barrier)</b>: various securement options</a></li><li><a href="#"><b>Roof deck</b></a></li>	</ul></div></html>
+|	style="vertical-align:center;text-align:center;" |											[[AARS Tested Roof Assemblies | '''Report link 1-A''']]
-''CSA-A123.21'' classifies assembly tests by the method of securement, and these are simplified with three acronyms:
+|		<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-success dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Membrane Option 1</a></li><li><a href="#">Membrane Option 2</a></li><li><a href="#">Membrane Option 3</a></li>	</ul></div></html>
-*'''AARS''' (Adhesive Applied Roof Systems)
+|		<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-success dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options  <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Membrane Option 1</a></li><li><a href="#">Membrane Option 2</a></li><li><a href="#">Membrane Option 3</a></li>	</ul></div></html>
-*'''PARS''' (Partially Adhered Roof Systems)
+|	style="vertical-align:center;text-align:center;" |											1, 2 or 3
-*'''MARS''' (Mechanically Attached Roof Systems).
+|		<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-info dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options  <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Insulation overlay Option 1</a></li><li><a href="#">Insulation overlay Option 2</a></li><li><a href="#">Insulation overlay Option 3</a></li>	</ul></div></html>
-<br>
+|		<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-info dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options  <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Insulation Option 1</a></li><li><a href="#">Insulation Option 2</a></li><li><a href="#">Insulation Option 3</a></li>	</ul></div></html>
-For a fuller explanation of these three classifications, see '''Part 3''' [http://rpm.rcabc.org/index.php?title=Securing_the_Roof_Assembly '''SECURING the ROOF ASSEMBLY'''] of the membrane system that is specified.
+|		<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-neutral dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options  <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Deck overlay Option 1</a></li><li><a href="#">Deck overlay Option 2</a></li><li><a href="#">Deck overlay Option 3</a></li>	</ul></div></html>
+|	style="vertical-align:center;text-align:center;" |											Deck type
-''CSA-A123.21'' requires that the published test limits for a roof system be adjusted by dividing the final test value by a safety factor of 1.5.  This factor reduces the actual test results in order to account for variables that a laboratory cannot test for, such as strong wind gusts or sudden wind shifts.  The tables displayed in the tabs to the right show only the adjusted Dynamic Uplift Resistance (DUR) values and can be validated by reviewing the downloadable test reports.
+|-
+|}
-It is imperative that the user of these reports become familiar with the structure and content typical in a Tested Assembly report.  While you will see that each accredited testing agency publishes test results in their own preferred format, there is general consistency among the report styles in the type of data each report provides:
-*a designation of the securement system (AARS, PARS or MARS), although some reports do not do this and the classification of the test can be determined only by reading the report
-*the DUR (most reports make this explicit at or near the top of the report although there are some reports that provide the DUR within the report text)
-*a list of tested and alternate materials
-*how each material was secured, and
-*the size of fasteners or the types of adhesive used.
-<br>
-All of these variables, and more, affect the performance of the roof assembly.  Care must therefore be taken to collect and analyze all this information in relation to the limitations of the building and the roof, and all these details (for example, the specific name of the adhesive and how it was applied) must be included in the design specifications that will ultimately guide the construction of the roof.
-<big><big>CSA-A123.21 and Tested Assembly Reports</big></big>
-The ''CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane roofing systems'' (''CSA-A123.21'') is, properly speaking, a test for membrane roof systems where the membrane is exposed to the weather.  Consequently, you will not find Tested Assembly reports that apply to ''Protected Membrane Roof Assemblies'' (where the membrane lies beneath the constituent components of a roof assembly).  To secure PMRAs, refer to Part 3 of the membrane system that is specified.
-A few roof systems were tested without insulation.  Most of these were tested on a plywood deck, but some were tested on steel.  Because these assemblies are listed together with reports for insulated roofs (also referred to as ''compact'' or ''conventional''), the reader should always look beyond the DUR and read the test report in order to understand the entire assembly.
+Each row displays one test for a particular system of securement.  That means that the DUR derived for that test is based on a particular pattern of fasteners or adhesive application.  Most assemblies were tested with one system of securement, but some were tested with as many as four.  When this is the case, the same report number will be displayed with test report names such as '''[Manufacturer X] MARS 1-A''' and '''[Manufacturer X] MARS 1-B'''.  Read the test report details to see what was changed in the securement system that affected the DUR for the assembly.
-<big><big>Tested Assemblies and RoofStar Guarantee Standards</big></big>
+Every table displays Tested Assembly report data in easy-to-read rows with drop-down buttons that display key information for each assembly (see the working example above).  When the Tested Assembly uses a membrane with 2 or more plies, each membrane and its options is listed in separate columns.
-Tested Assembly reports must always be read together with the '''''RoofStar Guarantee Standards''''' for the membrane system that is specified.  For example, a roof assembly might be tested with a particular material or in a particular way that does not conform to the Standards.  To conform to our Standards, some modifications to the Tested Assembly may be required, which may then preclude its use - for example, adding an insulation overlay panel where none was tested, because the assembly design requires one in order to conform to the '''''RoofStar Guarantee Standards'''''.
+Note that some tests were conducted <u>without</u> one or more of these constituent components and may list those materials as "optional".  When a material category such as "insulation overlay" is absent from the test, the drop-down menu will indicate its absence with "N/A" or as "optional".  Occasionally, a missing material poses a conflict with the '''''RoofStar Guarantee Standards'''''.  When the conflict is obvious, the Roof Assembly Summary will normally flag this with a note at the bottom of the list.  Notwithstanding these notes, the reader is responsible to understand and apply the '''''RoofStar Guarantee Standards''''' regardless of the Tested Assembly report (see below under '''Tested Assemblies and RoofStar Guarantee Standards''').
-When a conflict is apparent or obvious the ''Design Authority'' may find a way to 'yes' by examining the alternative materials listed in many Tested Assembly reports.  Alternatives include membranes, insulation overlays, insulation panels and roof deck overlays (commonly listed as "thermal layers").  Some materials are listed as "optional" which means that while the assembly was tested without the constituent material (a deck overlay, for example), the ''Design Authority'' may opt to use one of the materials listed in the report.  Drop-down menus of the tables below (see the "View options" buttons) display Accepted Materials that can be used in each Tested Assembly.
-If in doubt about how to use the Tested Assembly reports together with the '''''RoofStar Guarantee Standards''''', contact the [mailto:guarantees@rcabc.org '''''RoofStar Guarantee Program'''''] via email, or by calling (604) 882-9734.
-<big><big>Accepted Materials and Material Substitutions</big></big>
-We have selected Tested Assembly reports based on the membranes that will qualify for a '''''RoofStar Guarantee Program''''', but there are tested assemblies that include one or more ''Secondary Materials'' that are not ''Accepted'' by the '''''RoofStar Guarantee Program'''''.  Drop-down lists clearly show this by indicating when a material is "not accepted".  To ensure that the entire roof system complies with the Accepted Material requirements of the '''RoofStar Guarantee Program''', follow the requirements in '''3.2.1 Material Substitutions in Tested Assemblies''':
-:"When a manufacturer's Tested Assembly incorporates materials (and listed alternates) that are not part of the RoofStar Guarantee Program, the Design Authority must identify appropriate substitutions for those materials from the list of RoofStar-accepted Materials and consult the manufacturer concerning compatibility with the Tested Assembly. and direct the user to consult the membrane manufacturer in order to determine which ''Accepted'' materials will qualify as alternates."
+The Roof Assembly Summary provides a quick overview of how the roof assembly is secured.  This feature of the tables will be especially helpful when searching for a suitable PARS assembly, because the placement of mechanical fasteners within an assembly can vary widely.  Note, however, that the summaries do not list sizes, types or spacing of specific adhesives or fasteners; these details must be obtained from a careful reading of the Tested Assembly report.
 |}
 </tab>
-<tab name="SBS Membrane Assemblies">
+<tab name="Additional Notes">
-{{Template:MARS (SBS)}}
-</tab>
-<tab name="EPDM Membrane Assemblies">
-{{Template:MARS (EPDM)}}
-</tab>
-<tab name="TPO Membrane Assemblies">
-{{Template:MARS (TPO)}}
-</tab>
-<tab name="PVC Membrane Assemblies">
-{{Template:MARS (PVC)}}
-</tab>
-</tabs>
-==PARS==
-<tabs>
-<tab name="PARS Tested Assembly reports and data">
 {| class="wikitable"
 |-
-| style="background-color: #F0E68C;" column-width:100%" | <big><big>About the Tables</big></big>
+| style="color: black; background-color: #ffffcc;" |
+<big><big>Contents</big></big>
-The tables on the adjacent tabs display data drawn from, and links to, '''Tested Assembly Reports''' listed by the membrane type shown on the tab.  Dynamic Wind Uplift (DUR) values are shown in columns near the left side of the tables.  Only the DUR and Manufacturer columns are sortable; to sort a column, click the column heading.
+;[[AARS Tested Roof Assemblies#Responsibility | Specified Wind Loads and User Responsibility]]
+;[[AARS Tested Roof Assemblies#CSA-A123.21 | CSA-A123.21 and Tested Assembly Reports]]
-Each row displays one test for a particular system of securement.  That means that the DUR derived for that test is based on a particular pattern of fasteners or adhesive application.  Most assemblies were tested with one system of securement, but some were tested with as many as four.  When this is the case, the same report number will be displayed with test report names such as ''IKO MARS 1-A'' and ''IKO MARS 1-B''.  Read the test report details to see what was changed in the securement system that affected the DUR for the assembly.
+;[[AARS Tested Roof Assemblies#Guarantees | Tested Assemblies and RoofStar Guarantee Standards]]
+;[[AARS Tested Roof Assemblies#Substitutions | Accepted Materials and Material Substitutions]]
-Deck types tested with the Assembly are shown in the far right column.
+<hr>
-|-
+<div id="Responsibility"></div>
-| style="color: black; background-color: #ffffcc; width: 100%;text-align:left" |
 <big><big>Specified Wind Loads and User Responsibility</big></big>
-Before you use these tables, know the wind load requirements for the roof under design or construction.  You can find guidance in '''Part 3''' [http://rpm.rcabc.org/index.php?title=Securing_the_Roof_Assembly '''SECURING the ROOF ASSEMBLY'''] of the membrane system that is specified.  Specified Wind Loads for the three principal roof zones may be calculated either by using the formulae in the ''British Columbia Building Code'', 4.1.7 Wind Loads, or by using the National Research Council's online tool, [https://www.nrc-cnrc.gc.ca/eng/services/windrci/agreement.html '''Wind-RCI online wind calculator'''].
 The tables on this page display a collection of test data and downloadable reports offered for the purpose of designing and constructing a roof capable of resisting negative wind pressures, commonly referred to as "wind uplift" loads.  The data and reports are offered without endorsement by the RCABC; they are provided as a courtesy by the '''''RoofStar Guarantee Program''''' to assist the ''Design Authority'' with the task of designing a roof that satisfies Code requirements, that meets the designer's specific and numerous design preferences, and that will qualify for a '''''RoofStar Guarantee'''''.
@@ Line 141: / Line 93: @@
 <br>
 All of these variables, and more, affect the performance of the roof assembly.  Care must therefore be taken to collect and analyze all this information in relation to the limitations of the building and the roof, and all these details (for example, the specific name of the adhesive and how it was applied) must be included in the design specifications that will ultimately guide the construction of the roof.
+<div id="CSA-A123.21"></div>
 <big><big>CSA-A123.21 and Tested Assembly Reports</big></big>
@@ Line 148: / Line 100: @@
 A few roof systems were tested without insulation.  Most of these were tested on a plywood deck, but some were tested on steel.  Because these assemblies are listed together with reports for insulated roofs (also referred to as ''compact'' or ''conventional''), the reader should always look beyond the DUR and read the test report in order to understand the entire assembly.
-<big><big>Table Structure and Organization</big></big>
+Each Tested Assembly report displays the date the assembly was tested and often will also publish the anticipated revaluation date.  Some of the test reports available for download in the tables on this page have passed the revaluation date, but may still be valid; while we attempt to make available current test reports, we leave older reports available through the RPM because the assembly may have been retested but we have not been provided with a new test report.  The reader is responsible to check with the manufacturer who owns the test report, to verify that the validity of the test and the published DURs.
+<div id="Guarantees"></div>
-Every table displays Tested Assembly report data in easy-to-read rows with drop-down buttons that display key information for each assembly (see the "try me" example below).  Each button displays one or more options for
-*roof membrane
-*insulation overlay
-*insulation panels and
-*the deck overlay.
-<br>
-When the Tested Assembly uses a membrane with 2 or more plies, they are displayed in separate columns.
-<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-success dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Material option 1</a></li><li><a href="#">Material option 2</a></li><li><a href="#">Material option 3</a></li>
-</ul></div></html>
-<span style="color:#FF0000"> Try me</span>
-<br>
-<br>
-Some tests were conducted <u>without</u> one or more of these constituent components and may list those materials as "optional".  When a material category such as "insulation overlay" is absent from the test, the drop-down menu will indicate its absence with "N/A" or as "optional".  Occasionally, a missing material poses a conflict with the '''''RoofStar Guarantee Standards'''''.  When the conflict is obvious, the Roof Assembly Summary will normally flag this with a note at the bottom of the list.  Notwithstanding these notes, the reader is responsible to understand and apply the '''''RoofStar Guarantee Standards''''' regardless of the Tested Assembly report (see below under '''Tested Assemblies and RoofStar Guarantee Standards''').
-The Roof Assembly Summary provides a quick overview of how the roof assembly is secured.  This feature of the tables will be especially helpful when searching for a suitable PARS assembly, because the placement of mechanical fasteners can vary widely.  Note, however, that the summaries do not list sizes, types or spacing of specific adhesives or fasteners; these details must be obtained from a careful reading of the Tested Assembly report.
 <big><big>Tested Assemblies and RoofStar Guarantee Standards</big></big>
-Tested Assembly reports must always be read together with the '''''RoofStar Guarantee Standards''''' for the membrane system that is specified.  For example, a roof assembly might be tested with a particular material or in a particular way that does not conform to the Standards.  To conform to our Standards, some modifications to the Tested Assembly may be required, which may then preclude its use - for example, adding an insulation overlay panel where none was tested, because the assembly design requires one in order to conform to the '''''RoofStar Guarantee Standards'''''.
+Tested Assembly reports must always be read together with the '''''RoofStar Guarantee Standard''''' for the membrane system that is specified.  For example, a roof assembly might be tested with a particular material or in a particular way that does not conform to the Standard.  To conform to the Standard, some modifications to the Tested Assembly may be required, which may then preclude its use - for example, adding an insulation overlay panel where none was tested, because the assembly design requires one in order to conform to the Standard.
-When a conflict is apparent or obvious the ''Design Authority'' may find a way to 'yes' by examining the alternative materials listed in many Tested Assembly reports.  Alternatives include membranes, insulation overlays, insulation panels and roof deck overlays (commonly listed as "thermal layers").  Some materials are listed as "optional" which means that while the assembly was tested without the constituent material (a deck overlay, for example), the ''Design Authority'' may opt to use one of the materials listed in the report.  Drop-down menus of the tables below (see the "View options" buttons) display Accepted Materials that can be used in each Tested Assembly.
+When a conflict is apparent or obvious the ''Design Authority'' may find a way to 'yes' by examining the alternative materials listed in many Tested Assembly reports.  Alternatives include membranes, insulation overlays, insulation panels and roof deck overlays (commonly listed as "thermal layers").  Some materials are listed as "optional" which means that while the assembly was tested without the constituent material (a deck overlay, for example), the ''Design Authority'' may opt to use one of the materials listed in the report.  Drop-down menus of the tables displayed to the right (see the "View options" buttons) list Accepted Materials that can be used in each Tested Assembly.  Air or vapour control layers are not listed, because the '''''RoofStar Guarantee Program''''' does not accept and list these materials within Division C of the RPM.
-If in doubt about how to use the Tested Assembly reports together with the '''''RoofStar Guarantee Standards''''', contact the [mailto:guarantees@rcabc.org '''''RoofStar Guarantee Program'''''] via email, or by calling (604) 882-9734.
+If in doubt about how to use the Tested Assembly reports together with the '''''RoofStar Guarantee Standard''''', contact the [mailto:guarantees@rcabc.org '''''RoofStar Guarantee Program'''''] via email, or by calling (604) 882-9734.
+<div id="Substitutions"></div>
 <big><big>Accepted Materials and Material Substitutions</big></big>
 We have selected Tested Assembly reports based on the membranes that will qualify for a '''''RoofStar Guarantee Program''''', but there are tested assemblies that include one or more ''Secondary Materials'' that are not ''Accepted'' by the '''''RoofStar Guarantee Program'''''.  Drop-down lists clearly show this by indicating when a material is "not accepted".  To ensure that the entire roof system complies with the Accepted Material requirements of the '''RoofStar Guarantee Program''', follow the requirements in '''3.2.1 Material Substitutions in Tested Assemblies''':
-:"When a manufacturer's Tested Assembly incorporates materials (and listed alternates) that are not part of the RoofStar Guarantee Program, the Design Authority must identify appropriate substitutions for those materials from the list of RoofStar-accepted Materials and consult the manufacturer concerning compatibility with the Tested Assembly. and direct the user to consult the membrane manufacturer in order to determine which ''Accepted'' materials will qualify as alternates."
+:"When a manufacturer's Tested Assembly incorporates materials (and listed alternates) that are not part of the '''''RoofStar Guarantee Program''''', the ''Design Authority'' must identify appropriate substitutions for those materials from the list of RoofStar-accepted Materials and consult the manufacturer concerning compatibility with the Tested Assembly. and direct the user to consult the membrane manufacturer in order to determine which ''Accepted'' materials will qualify as alternates."
-|}
-</tab>
-<tab name="SBS Membrane Assemblies">
-{{Template:PARS (SBS)}}
-</tab>
-<tab name="EPDM Membrane Assemblies">
-{{Template:PARS (EPDM)}}
-</tab>
-<tab name="TPO Membrane Assemblies">
-{{Template:PARS (TPO)}}
-</tab>
-<tab name="PVC Membrane Assemblies">
-{{Template:PARS (PVC)}}
-</tab>
-<tab name="BUR Assemblies">
-{{Template:PARS (BUR)}}
-</tab>
-</tabs>
-==AARS==
-<tabs>
-<tab name="AARS Tested Assembly reports and data">
-{| class="wikitable"
-|-
-| style="background-color: #F0E68C;" column-width:100%" | <big><big>About the Tables</big></big>
-The tables on the adjacent tabs display data drawn from, and links to, '''Tested Assembly Reports''' listed by the membrane type shown on the tab.  Dynamic Wind Uplift (DUR) values are shown in columns near the left side of the tables.  Only the DUR and Manufacturer columns are sortable; to sort a column, click the column heading.
-Each row displays one test for a particular system of securement.  That means that the DUR derived for that test is based on a particular pattern of fasteners or adhesive application.  Most assemblies were tested with one system of securement, but some were tested with as many as four.  When this is the case, the same report number will be displayed with test report names such as ''IKO MARS 1-A'' and ''IKO MARS 1-B''.  Read the test report details to see what was changed in the securement system that affected the DUR for the assembly.
-Deck types tested with the Assembly are shown in the far right column.
-|-
-| style="color: black; background-color: #ffffcc; width: 100%;text-align:left" |
-<big><big>Specified Wind Loads and User Responsibility</big></big>
-Before you use these tables, know the wind load requirements for the roof under design or construction.  You can find guidance in '''Part 3''' [http://rpm.rcabc.org/index.php?title=Securing_the_Roof_Assembly '''SECURING the ROOF ASSEMBLY'''] of the membrane system that is specified.  Specified Wind Loads for the three principal roof zones may be calculated either by using the formulae in the ''British Columbia Building Code'', 4.1.7 Wind Loads, or by using the National Research Council's online tool, [https://www.nrc-cnrc.gc.ca/eng/services/windrci/agreement.html '''Wind-RCI online wind calculator'''].
-The tables on this page display a collection of test data and downloadable reports offered for the purpose of designing and constructing a roof capable of resisting negative wind pressures, commonly referred to as "wind uplift" loads.  The data and reports are offered without endorsement by the RCABC; they are provided as a courtesy by the '''''RoofStar Guarantee Program''''' to assist the ''Design Authority'' with the task of designing a roof that satisfies Code requirements, that meets the designer's specific and numerous design preferences, and that will qualify for a '''''RoofStar Guarantee'''''.
-The ''British Columbia Building Code'' (or the Code having jurisdiction) requires a roof to be capable of resisting ''Specified Wind Loads'' (see the ''British Columbia Building Code, Part 4 (4.1.7 Wind Loads) and Part 5 (5.2.2.2 Determination of Wind Load)'', inclusive of the notes in the appendices).  The reader will note that there are optional pathways by which a membrane roof design can comply with the Code.  One pathway is the use of a "Tested Assembly" - a roof assembly tested in controlled laboratory conditions to resist simulated wind pressures and gusts.  The test must be conducted in strict conformity to ''CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane roofing systems'' (''CSA-A123.21'').  The results of the test are published in a report signed off by the accredited testing agency.  Each report details the materials and securement methods of the assembly.  Every detail in a Tested Assembly report is critical for the performance of a roof designed on the basis of the tested assembly.
-''CSA-A123.21'' classifies assembly tests by the method of securement, and these are simplified with three acronyms:
-*'''AARS''' (Adhesive Applied Roof Systems)
-*'''PARS''' (Partially Adhered Roof Systems)
-*'''MARS''' (Mechanically Attached Roof Systems).
-<br>
-For a fuller explanation of these three classifications, see '''Part 3''' [http://rpm.rcabc.org/index.php?title=Securing_the_Roof_Assembly '''SECURING the ROOF ASSEMBLY'''] of the membrane system that is specified.
-''CSA-A123.21'' requires that the published test limits for a roof system be adjusted by dividing the final test value by a safety factor of 1.5.  This factor reduces the actual test results in order to account for variables that a laboratory cannot test for, such as strong wind gusts or sudden wind shifts.  The tables displayed in the tabs to the right show only the adjusted Dynamic Uplift Resistance (DUR) values and can be validated by reviewing the downloadable test reports.
-It is imperative that the user of these reports become familiar with the structure and content typical in a Tested Assembly report.  While you will see that each accredited testing agency publishes test results in their own preferred format, there is general consistency among the report styles in the type of data each report provides:
-*a designation of the securement system (AARS, PARS or MARS), although some reports do not do this and the classification of the test can be determined only by reading the report
-*the DUR (most reports make this explicit at or near the top of the report although there are some reports that provide the DUR within the report text)
-*a list of tested and alternate materials
-*how each material was secured, and
-*the size of fasteners or the types of adhesive used.
-<br>
-All of these variables, and more, affect the performance of the roof assembly.  Care must therefore be taken to collect and analyze all this information in relation to the limitations of the building and the roof, and all these details (for example, the specific name of the adhesive and how it was applied) must be included in the design specifications that will ultimately guide the construction of the roof.
-<big><big>CSA-A123.21 and Tested Assembly Reports</big></big>
-The ''CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane roofing systems'' (''CSA-A123.21'') is, properly speaking, a test for membrane roof systems where the membrane is exposed to the weather.  Consequently, you will not find Tested Assembly reports that apply to ''Protected Membrane Roof Assemblies'' (where the membrane lies beneath the constituent components of a roof assembly).  To secure PMRAs, refer to Part 3 of the membrane system that is specified.
-A few roof systems were tested without insulation.  Most of these were tested on a plywood deck, but some were tested on steel.  Because these assemblies are listed together with reports for insulated roofs (also referred to as ''compact'' or ''conventional''), the reader should always look beyond the DUR and read the test report in order to understand the entire assembly.
-<big><big>Table Structure and Organization</big></big>
-Every table displays Tested Assembly report data in easy-to-read rows with drop-down buttons that display key information for each assembly (see the "try me" example below).  Each button displays one or more options for
-*roof membrane
-*insulation overlay
-*insulation panels and
-*the deck overlay.
-<br>
-When the Tested Assembly uses a membrane with 2 or more plies, they are displayed in separate columns.
-<html><!-- Single button --><div class="btn-group"><button type="button" class="btn btn-success dropdown-toggle" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">View options <span class="caret"></span></button><ul class="dropdown-menu">										<li><a href="#">Material option 1</a></li><li><a href="#">Material option 2</a></li><li><a href="#">Material option 3</a></li>
-</ul></div></html>
-<span style="color:#FF0000"> Try me</span>
-<br>
-<br>
-Some tests were conducted <u>without</u> one or more of these constituent components and may list those materials as "optional".  When a material category such as "insulation overlay" is absent from the test, the drop-down menu will indicate its absence with "N/A" or as "optional".  Occasionally, a missing material poses a conflict with the '''''RoofStar Guarantee Standards'''''.  When the conflict is obvious, the Roof Assembly Summary will normally flag this with a note at the bottom of the list.  Notwithstanding these notes, the reader is responsible to understand and apply the '''''RoofStar Guarantee Standards''''' regardless of the Tested Assembly report (see below under '''Tested Assemblies and RoofStar Guarantee Standards''').
-The Roof Assembly Summary provides a quick overview of how the roof assembly is secured.  This feature of the tables will be especially helpful when searching for a suitable PARS assembly, because the placement of mechanical fasteners can vary widely.  Note, however, that the summaries do not list sizes, types or spacing of specific adhesives or fasteners; these details must be obtained from a careful reading of the Tested Assembly report.
-<big><big>Tested Assemblies and RoofStar Guarantee Standards</big></big>
-Tested Assembly reports must always be read together with the '''''RoofStar Guarantee Standards''''' for the membrane system that is specified.  For example, a roof assembly might be tested with a particular material or in a particular way that does not conform to the Standards.  To conform to our Standards, some modifications to the Tested Assembly may be required, which may then preclude its use - for example, adding an insulation overlay panel where none was tested, because the assembly design requires one in order to conform to the '''''RoofStar Guarantee Standards'''''.
-When a conflict is apparent or obvious the ''Design Authority'' may find a way to 'yes' by examining the alternative materials listed in many Tested Assembly reports.  Alternatives include membranes, insulation overlays, insulation panels and roof deck overlays (commonly listed as "thermal layers").  Some materials are listed as "optional" which means that while the assembly was tested without the constituent material (a deck overlay, for example), the ''Design Authority'' may opt to use one of the materials listed in the report.  Drop-down menus of the tables below (see the "View options" buttons) display Accepted Materials that can be used in each Tested Assembly.
-If in doubt about how to use the Tested Assembly reports together with the '''''RoofStar Guarantee Standards''''', contact the [mailto:guarantees@rcabc.org '''''RoofStar Guarantee Program'''''] via email, or by calling (604) 882-9734.
-<big><big>Accepted Materials and Material Substitutions</big></big>
-We have selected Tested Assembly reports based on the membranes that will qualify for a '''''RoofStar Guarantee Program''''', but there are tested assemblies that include one or more ''Secondary Materials'' that are not ''Accepted'' by the '''''RoofStar Guarantee Program'''''.  Drop-down lists clearly show this by indicating when a material is "not accepted".  To ensure that the entire roof system complies with the Accepted Material requirements of the '''RoofStar Guarantee Program''', follow the requirements in '''3.2.1 Material Substitutions in Tested Assemblies''':
-:"When a manufacturer's Tested Assembly incorporates materials (and listed alternates) that are not part of the RoofStar Guarantee Program, the Design Authority must identify appropriate substitutions for those materials from the list of RoofStar-accepted Materials and consult the manufacturer concerning compatibility with the Tested Assembly. and direct the user to consult the membrane manufacturer in order to determine which ''Accepted'' materials will qualify as alternates."
 |}
@@ Line 302: / Line 141: @@
 [[Main Page|<i class="fa fa-chevron-circle-left" ></i> ''Home'']]
-</div><!-- mainBodyDiv -->
-</div><!-- row -->
-<div style="text-align:center">
-© RCABC 2020
-<br>
-No reproduction of these Standards, in whole or in part, is lawful without the expressed permission of the RGC Guarantee Program.
-</div>