Difference between revisions of "Materials:Colphene Flam HR SP"

Latest revision as of 22:45, 22 November 2021

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc. Accepted for RoofStar Guarantee Program February 2018 Product Summary Colphene Flam HR SP is the top layer of a 2-ply waterproofing membrane composed of SBS-modified bitumen and a composite reinforcement. The top surface of the membrane is sanded; the bottom face is covered with a thermofusible plastic film. This material is used only in a protected waterproofing assembly at grade (on concrete), on in a Protected Membrane Roof system. Roofing Installation Guidelines Waterproofing Installation Guidelines

Click below for the Technical Data Sheet

@@ Line 11: / Line 11: @@
 ;Accepted for '''''RoofStar Guarantee Program''''': February 2018
 ;:
-;'''Product Summary''': '''Colphene Flam HR SP''' is a waterproofing membrane composed of SBS modified bitumen and a non-woven polyester reinforcement. The top surface of the membrane is either sanded or covered with a thermofusible plastic film.  This material is used as a waterproofing membrane on concrete, for roofing or on plaza decks and other waterproofing surfaces.
+;'''Product Summary''': '''Colphene Flam HR SP''' is the top layer of a 2-ply waterproofing membrane composed of SBS-modified bitumen and a composite reinforcement. The top surface of the membrane is sanded; the bottom face is covered with a thermofusible plastic film.  This material is used only in a protected waterproofing assembly at grade (on concrete), on in a ''Protected Membrane Roof'' system.
 ;:
 ;[[Soprema SBS Membrane Installation Guidelines|Roofing Installation Guidelines]]