Difference between revisions of "ASM Eave Protection and Underlayment"

Latest revision as of 14:53, 28 June 2022

Division D - Construction Details

ASM | Eave Protection and Underlayment ( Article 8.3.2.1. and Article 8.3.2.3.)

Notice to Reader
Images used in a Construction Detail are representative and not prescriptive, and are not necessarily drawn to scale. They are intended to support the related Standard (Ref. Division A, Article 2.2.1.2.). The reader may link to the related Article in the detail title, or link to the Standard as it relates to a specific element in the detail. All hyperlinks are displayed blue text.

ASM Details

Click below for a printable version of this page (N/A)

1 WORK INCLUDED

(1) Metal flashing underlayment/separation membrane

Required for metal flashings installed on wood substrates.

(2) Metal edge flashing

Installed to manufacturer's printed instructions.

(3) Ice and water protection

One ply of accepted self-adhered modified bituminous membrane.

(4) Underlayment

Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.

This application pertains only to slopes 1:3 (4" in 12") or greater. For slopes less than 1:3, see Construction Detail Eave Protection and Underlayment (Low Slopes).
Separation layer not shown for clarity.

2 RELATED WORK BY OTHERS

(A) Acceptable deck

NOTE: See the Standard for additional requirements.

Back to ASM Roof System Details

Home

© RCABC 2024
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

@@ Line 1: / Line 1: @@
-{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center"
+{{Template:RPM Info}}
-| colspan="2"  | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6495ed">'''blue-linked'''</span></big>
-|}
+{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
+__NOTOC__
+<big><big>Division D - Construction Details</big></big>
+<hr>
+<big><big><big><big><big>ASM | Eave Protection and Underlayment ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.3. Underlayment for Common and Steep Slopes | Article 8.3.2.3.]])</big></big></big></big></big>
+{{Template:Construction Details Header}}
 <div class="panel panel-success">
 <div class="panel-heading"><big>'''ASM Details'''</big></div>
@@ Line 7: / Line 14: @@
 <div class="col-md-6">
 <div style="text-align:center; vertical-align:center">
-[[File:8.1.4.1.1.jpg|class=img-responsive]]
+[[File:ASM 8.1.1 Eave Protection and Underlayment.jpg |class=img-responsive | link=http://rpm.rcabc.org/images/b/bb/ASM_8.1.1_Eave_Protection_and_Underlayment.jpg]]
+</div>
+::Click below for a printable version of this page (N/A)
+<div style="width:150px; text-align: left;">
+:[[File:Pdf.png|100 px|link=|'''Print Sheet''']]
 </div>
 </div><!-- COL-MD-6 -->
@@ Line 13: / Line 26: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMUNDERLAYMENT|'''Underlayment''']]: Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.
+;(1) [[ASM Roof Systems Standard#PART_13| '''Metal flashing underlayment/separation membrane''']]: Required for metal flashings installed on wood substrates.
-;(2) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMICE|'''Ice and Water Protection''']]: One ply of accepted self-adhered modified bituminous membrane.
+;(2) [[ASM Roof Systems Standard#PART_13|'''Metal edge flashing''']]: Installed to manufacturer's printed instructions.
-;(3) '''Edge Metal Flashing''': Installed to manufacturer's printed instructions.
+;(3) [[ASM Roof Systems Standard#PART_8|'''Ice and water protection''']]: One ply of accepted self-adhered modified bituminous membrane.
+;(4) [[ASM Roof Systems Standard#PART_8|'''Underlayment''']]: Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.
-:'''Note:'''
+:* This application pertains only to slopes 1:3 (4" in 12") or greater.  For slopes less than 1:3, see Construction Detail '''Eave Protection and Underlayment (Low Slopes)'''.
-* This specification is only applicable to slopes 1:3 (4" in 12") or greater
+:* Separation layer not shown for clarity.
-* Slip sheet not shown for clarity
 <hr>
 === RELATED WORK BY OTHERS ===
-;(A) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMDECK|'''Acceptable Deck''']]
+;(A) [[ASM Roof Systems Standard#PART_2 |'''Acceptable deck''']]
 </div><!-- COL-6-MD -->
 </div><!-- PANEL BODY -->
 </div><!-- PANEL -->
+'''NOTE''': See the [[ASM Roof Systems Standard | '''Standard''']] for additional requirements.
-'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.
 <hr>
+[[ASM Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Roof System Details'']]
-[[RoofStar Guarantee Standards for ASM Roof Assemblies|<i class="fa fa-chevron-circle-left fa" ></i> RoofStar Guarantee Standards for ASM Roof Assemblies]]
+[[Main Page | <i class="fa fa-home fa"></i> Home]]
-[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]
-[[Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Construction Details'']]
+{{Tempate:RPM Page Footer with Copyright and Current Date}}

Difference between revisions of "ASM Eave Protection and Underlayment"

Difference between revisions of "ASM Eave Protection and Underlayment"

Latest revision as of 14:53, 28 June 2022

1 WORK INCLUDED

2 RELATED WORK BY OTHERS

3 Accept Terms Of Use