Difference between revisions of "ASM Eave Protection and Underlayment"

Jump to: navigation, search

Difference between revisions of "ASM Eave Protection and Underlayment"

 
(30 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:8.1.4.1.1.jpg]]
+
{{Template:RPM Info}}
  
 +
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
 +
__NOTOC__
  
−
=== WORK INCLUDED ===
+
<big><big>Division D - Construction Details</big></big>
 +
<hr>
 +
<big><big><big><big><big>ASM | Eave Protection and Underlayment ([[ASM_Roof_Systems_Standard#8.3.2.1. Installation of Eave Protection | Article 8.3.2.1.]] and [[ASM_Roof_Systems_Standard#8.3.2.3. Underlayment for Common and Steep Slopes | Article 8.3.2.3.]])</big></big></big></big></big>
 +
{{Template:Construction Details Header}}
  
−
;(1) <b>Underlayment</b>:
+
<div class="panel panel-success">
−
:Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.  
+
<div class="panel-heading"><big>'''ASM Details'''</big></div>
 +
<div class="panel-body">
 +
<div class="col-md-6">
 +
<div style="text-align:center; vertical-align:center">
 +
[[File:ASM 8.1.1 Eave Protection and Underlayment.jpg |class=img-responsive | link=http://rpm.rcabc.org/images/b/bb/ASM_8.1.1_Eave_Protection_and_Underlayment.jpg]]
 +
</div>
  
−
;(2) <b>Ice And Water Protection</b>:  
+
::Click below for a printable version of this page (N/A)
−
:One ply of accepted self-adhered modified bituminous membrane.
 
  
−
;(3) <b>Edge Metal Flashing</b>:
+
<div style="width:150px; text-align: left;">
−
:Installed to manufacturer&#8217;s printed instructions.
+
:[[File:Pdf.png|100 px|link=|'''Print Sheet''']]
 +
</div>
 +
</div><!-- COL-MD-6 -->
  
−
;Note:  
+
<div class="col-md-6">
−
;* This specification is only applicable to slopes 1:3 (4" in 12") or greater
+
=== WORK INCLUDED ===
−
;* Slip sheet not shown for clarity
+
;(1) [[ASM Roof Systems Standard#PART_13| '''Metal flashing underlayment/separation membrane''']]: Required for metal flashings installed on wood substrates.
 +
;(2) [[ASM Roof Systems Standard#PART_13|'''Metal edge flashing''']]: Installed to manufacturer's printed instructions.
 +
;(3) [[ASM Roof Systems Standard#PART_8|'''Ice and water protection''']]: One ply of accepted self-adhered modified bituminous membrane.
 +
;(4) [[ASM Roof Systems Standard#PART_8|'''Underlayment''']]: Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.
 +
:* This application pertains only to slopes 1:3 (4" in 12") or greater.  For slopes less than 1:3, see Construction Detail '''Eave Protection and Underlayment (Low Slopes)'''.
 +
:* Separation layer not shown for clarity.
  
 +
<hr>
  
 
=== RELATED WORK BY OTHERS ===
 
=== RELATED WORK BY OTHERS ===
 +
;(A) [[ASM Roof Systems Standard#PART_2 |'''Acceptable deck''']]
 +
</div><!-- COL-6-MD -->
 +
</div><!-- PANEL BODY -->
 +
</div><!-- PANEL -->
  
−
;(A) <b>Acceptable Deck</b>
+
'''NOTE''': See the [[ASM Roof Systems Standard | '''Standard''']] for additional requirements.
  
−
:NOTE: * Refer to <i>RGC Guarantee Standards</i> for additional requirements.
+
<hr>
  
−
<hr>
+
[[ASM Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Roof System Details'']]
  
 +
[[Main Page | <i class="fa fa-home fa"></i> Home]]
  
−
[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]
+
{{Tempate:RPM Page Footer with Copyright and Current Date}}

Latest revision as of 14:53, 28 June 2022



Division D - Construction Details

ASM | Eave Protection and Underlayment ( Article 8.3.2.1. and Article 8.3.2.3.)

Notice to Reader
Images used in a Construction Detail are representative and not prescriptive, and are not necessarily drawn to scale. They are intended to support the related Standard (Ref. Division A, Article 2.2.1.2.).

The reader may link to the related Article in the detail title, or link to the Standard as it relates to a specific element in the detail. All hyperlinks are displayed blue text.

ASM Details

ASM 8.1.1 Eave Protection and Underlayment.jpg

Click below for a printable version of this page (N/A)
Print Sheet

1 WORK INCLUDED

(1) Metal flashing underlayment/separation membrane
Required for metal flashings installed on wood substrates.
(2) Metal edge flashing
Installed to manufacturer's printed instructions.
(3) Ice and water protection
One ply of accepted self-adhered modified bituminous membrane.
(4) Underlayment
Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.
  • This application pertains only to slopes 1:3 (4" in 12") or greater. For slopes less than 1:3, see Construction Detail Eave Protection and Underlayment (Low Slopes).
  • Separation layer not shown for clarity.

2 RELATED WORK BY OTHERS

(A) Acceptable deck

NOTE: See the Standard for additional requirements.

Back to ASM Roof System Details

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=ASM_Eave_Protection_and_Underlayment&oldid=43120"