Difference between revisions of "Materials:MF (Protect Board Composite)"

Latest revision as of 21:48, 16 October 2023

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Posi-Slope Western Accepted for RoofStar Guarantee Program January 2008 Product Summary "A rigid mineral fibre board manufactured from basalt rock and steel slag with a melting point of 2180 F (1195 C), laminated to a 3 mm (1/8") asphaltic board facer with square edges." The product can be produced in tapered panels with a uniform slope, in two sizes (2'x4', and 3'x4'). (adapted from the Technical Data Sheet)

Click below for the Technical Data Sheet.

Back to Accepted Materials

Home

@@ Line 9: / Line 9: @@
 | '''Manufacturer''': [http://www.posislope.com/  '''Posi-Slope Western''']
 ;:
-;Accepted for '''''RoofStar Guarantee Program''''': Date TBA
+;Accepted for '''''RoofStar Guarantee Program''''': January 2008
 ;:
-;'''Product Summary''': A non-combustible rigid mineral fibre board manufactured from basalt rock and steel slag with a melting point of 2180&#186;F (1195&#186;C), excellent fire resistance properties and stable thermal values. Laminated with a top layer of fortified asphalt protection board for strength and versatility of application.
+;'''Product Summary''': "A rigid mineral fibre board manufactured from basalt rock and steel slag with a melting point of 2180 F (1195 C), laminated to a 3 mm (1/8") asphaltic board facer with square edges."  The product can be produced in tapered panels with a uniform slope, in two sizes (2'x4', and 3'x4').
+:<br>(adapted from the Technical Data Sheet)
-:<table border=0 cellpadding=5 cellspacing=0>
-	<tr>
-		<td>Applications:</td>
-		<td>Torched, hot mopped or cold applied BUR and Modified Bituminous roofing systems. Can be fully adhered, mechanically fastened, loose-laid or in ballasted single-ply roofing systems.</tD>
-	</tr>
-	<tr>
-		<td>Dimensions:</td>
-		<td>Butt edge 60 cm (2') x 120 cm (4') and 90 cm (3') x 120 cm (4').</td>
-	</tr>
-	<tr>
-		<td>Slope:</td>
-		<td>Unlimited; Minimum starting thickness 0" (nominal).</td>
-	</tr>
-	<tr>
-		<td>Compliance:</td>
-		<td>CAN/CGSB 2-51.31-M84, ASTM C726 Compressive strength of mineral fibre only at 10% deformation - ASTM C165: 90 kPa (13 psi).</td>
-	</tr>
-	<tr>
-		<td>R Factor:</td>
-		<td><b>R4</b> per inch</td>
-       <tr>
-        <tr>
-                <td></td>
-                <td>RSI .7 / 25 mm</td>
-	</tr>
-</table>
-<u>SPECIFICATION</u>
-<b>MF - Protect Board Composite</b> consists of mineral fibre insulation, factory laminated with a 3 mm (1/8") asphalt board facer with square edges. All tapered panels shall have a uniform slope and all valley corners and crickets to be factory mitred by Posi-Slope Ent. Inc. All boards to be clearly coded and shall provide arrows to indicate the slope direction of each board. Manufacture in accordance with architect approved pre-engineered shop drawings by Posi-Slope.
 |}