Latest revision as of 17:45, 4 November 2025
Division C - Accepted Materials
Armourbond Flash Sand
by IKO Industries Ltd.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- IKO Industries Ltd.
- Accepted for the RoofStar Guarantee Program
- October 24, 2025
- Accepted for application in
- Waterproofing Roof Systems
- Acceptance Criteria
- RGC ACWP-MOD, "RGC ACCEPTANCE CRITERIA for MANUFACTURED POLYMER-MODIFIED, REINFORCED BITUMINOUS SHEET MEMBRANES Used in Roof Waterproofing and Grade-level Waterproofing Systems"
- Product Summary
- Armourbond Flash Sand is composed of a non-woven reinforced polyester mat and select glass fiber strands. It is coated top and bottom with an SBS-modified asphalt to a thickness of approximately 2.5 mm (98 mils). Armourbond Flash Sand may be placed in flame-sensitive areas for base flashing details where a mopped or cold applied cap flashing will be used. The top surface of the product is sand coated, while the self-adhering underside is covered by a removable silicone treated release film.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- see "Standard for SBS-modified Bitumen Membrane Roof Systems" for specific requirements concerning use and application of this material.
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
