Accepted Materials - TPO Membrane Systems

To view materials in any section listed below, click on the EXPAND button located at the right hand side of this page

1 Vapour Retarders

The RCABC does not specify Vapour Retarders, as they are not included in the RoofStar Guarantee Program. See manufacturer specifications where Vapour Retarders are required, and refer to proprietary products and installation instructions. This cross-reference is listed for information only.

2 Deck Overlay Boards

Expand

Deck overlays are materials installed over decks to render the surface suitable for waterproofing materials. Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

* Use treated plywood over concrete deck surfaces

Manufacturer	Product Name	Product Type	Thickness mm (in.)	Weight (lb/square foot)	Comp. Strength (psi, nominal)	Acceptable Application
	Plywood	Plywood overlay	12.7 (1/2) min.	Variable	-	All decks*
Georgia-Pacific Canada Ltd.	DensDeck Roofboard	Moisture-resistant gypsum core board	6.4 (1/4)	1.100	500-900	All decks
Georgia-Pacific Canada Ltd.	DensDeck Roofboard	Moisture-resistant gypsum core board	12.7 (1/2)	1.950	500-900	All decks
Georgia-Pacific Canada Ltd.	DensDeck Roofboard	Moisture-resistant gypsum core board	15.9 (5/8)	2.500	500-900	All decks
Georgia-Pacific Canada Ltd.	DensDeck® Prime with EONIC Roof Board	Moisture-resistant gypsum core board	6.4 (1/4)	1.150	900	All decks
Georgia-Pacific Canada Ltd.	DensDeck® Prime with EONIC Roof Board	Moisture-resistant gypsum core board	12.7 (1/2)	1.975	900	All decks
Georgia-Pacific Canada Ltd.	DensDeck® Prime with EONIC Roof Board	Moisture-resistant gypsum core board	15.9 (5/8)	2.550	900	All decks
USG (CGC) SecureRock	Securerock Glass-Mat Roof Board	Moisture-resistant gypsum core board	6.4 (1/4)	1.200	700-1000	All decks
USG (CGC) SecureRock	Securerock Glass-Mat Roof Board	Moisture-resistant gypsum core board	12.7 (1/2)	2.000	700-1000	All decks
USG (CGC) SecureRock	Securerock Glass-Mat Roof Board	Moisture-resistant gypsum core board	15.9 (5/8)	2.700	700-1000	All decks
USG (CGC) SecureRock	Securerock Gypsum Fibre Roof Board	Moisture-resistant gypsum core board	6.4 (1/4)	1.570	1800	All decks
USG (CGC) SecureRock	Securerock Gypsum Fibre Roof Board	Moisture-resistant gypsum core board	9.5 (3/8)	1.960	1800	All decks
USG (CGC) SecureRock	Securerock Gypsum Fibre Roof Board	Moisture-resistant gypsum core board	12.7 (1/2)	2.760	1800	All decks
USG (CGC) SecureRock	Securerock Gypsum Fibre Roof Board	Moisture-resistant gypsum core board	15.9 (5/8)	3.200	1800	All decks
USG (CGC) SecureRock	Securerock Coated Ultralight Glass Mat Roof Board*	6.4 (1/4)	1.200	700-1000	700-1000	All decks
USG (CGC) SecureRock	Securerock Coated Ultralight Glass Mat Roof Board*	12.7 (1/2)	1.700	700-1000	700-1000	All decks
USG (CGC) SecureRock	Securerock Coated Ultralight Glass Mat Roof Board*	15.9 (5/8)	2.200	700-1000	700-1000	All decks
USG (CGC) SecureRock	Securerock Ultralight Glass Mat Roof Board	Moisture-resistant gypsum core board	6.4 (1/4)	1.200	700-1000	All decks
USG (CGC) SecureRock	Securerock Ultralight Glass Mat Roof Board	Moisture-resistant gypsum core board	12.7 (1/2)	1.700	700-1000	All decks
USG (CGC) SecureRock	Securerock Ultralight Glass Mat Roof Board	Moisture-resistant gypsum core board	15.9 (5/8)	2.200	700-1000	All decks

^* Indicates conditions of acceptance. See the product page for more information.

3 Insulation

Composite Board Insulation

Expand

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

Manufacturer	Product Name	System Test Type (Wind)	Density (kg/cu. m)	Compressive Strength (kPa/25.4 mm)	Compressive Strength (psi/1 in. thick)	Thermal Resistance (RSI/25.4 mm)	Thermal Resistance (R/inch)
Posi-Slope Western	MF (Protect Board Composite)	‒	‒	‒	‒	‒	‒
Soprema Inc.	Xpress Board HD	‒	200	190 (at 25%)	28 (at 25%)	0.70 K/W	4
Soprema Inc.	Xpress ISO	‒	‒	138 (Polyiso only)	20 (Polyiso only)	1.0	5.7

XPS (Extruded Expanded Polystyrene Foam)

Expand

XPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.

Manufacturer	Product Name	System Test Type (Wind)	Density (kg/cu. m)	Compressive Strength (kPa)	Compressive Strength (psi)	Thermal Resistance (RSI/25.4 mm)	Thermal Resistance (R/inch)
Dupont Specialty Products Division - Safety and Construction	Deckmate (Type 2)	‒	‒	110	16	0.87	5
Dupont Specialty Products Division - Safety and Construction	Deckmate Plus (Type 3)	‒	‒	140	20	0.87	5
Dupont Specialty Products Division - Safety and Construction	Roofmate (Type 4)	‒	‒	240	35	0.87	5
Dupont Specialty Products Division - Safety and Construction	Roofmate CT (Type 4)	‒	‒	240*	35*	0.87	5
Owens Corning Canada	Foamular C200 (Type 3)	‒	‒	140	20	0.88	5
Owens Corning Canada	Foamular F350 (Type 4)	‒	‒	240	35	0.88	5
Owens Corning Canada	Foamular 400 (Type 4)	‒	‒	275	40	0.88	5
Owens Corning Canada	Foamular 600 (Type 4)	‒	‒	415	60	0.88	5
Owens Corning Canada	Foamular 1000 (Type 4)	‒	‒	690	100	0.88	5
Owens Corning Canada	Foamular 404 (Type 4)	‒	‒	276	40	0.88	5
Owens Corning Canada	Foamular 604 (Type 4)	‒	‒	414	60	0.88	5
Owens Corning Canada	Foamular 404RB (Type 4)	‒	‒	276	40	0.84	4.75
Owens Corning Canada	Foamular 604RB (Type 4)	‒	‒	414	60	0.84	4.75
Soprema Inc.	Sopra-XPS 35	‒	‒	350	51	0.88	5
Soprema Inc.	Sopra-XPS 40, 60, 100	‒	‒	500, 600, 700	73, 87, 102	0.88	5

EPS (Expanded Polystyrene Foam)

Expand

EPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.

Manufacturer	Product Name	System Test Type (Wind Uplift Resistance)	Compressive Strength (kPa)	Compressive Strength (psi)	Thermal Resistance (RSI/25.4 mm) @24°C (74°F)	Thermal Resistance (R/inch) @24°C (74°F)
Airfoam Industries Ltd.	Korolite 100 (Type 1, Flat)	‒	70	10	0.65	3.75
Airfoam Industries Ltd.	Korolite 160 (Type 2, Flat)	‒	110	16	0.7	4.04
Airfoam Industries Ltd.	Korolite 250 (Type 3, Flat)	‒	172	25	0.74	4.27
Airfoam Industries Ltd.	Korolite 100 (Type 1, Tapered)	‒	70	10	0.65	3.75
Airfoam Industries Ltd.	Korolite 160 (Type 2, Tapered)	‒	110	16	0.7	4.04
Airfoam Industries Ltd.	Korolite 250 (Type 3, Tapered)	‒	172	25	0.74	4.27
Beaver Plasticts Ltd.	Terrafoam (Type 1, Flat)	‒	70	10	0.65	3.75
Beaver Plasticts Ltd.	Terrafoam (Type 2, Flat)	‒	110	16	0.7	4.04
Beaver Plasticts Ltd.	Terrafoam (Type 3, Flat)	‒	140	20.4	0.74	4.27
Beaver Plasticts Ltd.	Terrafoam (Type 1, Tapered)	‒	70	10	0.65	3.75
Beaver Plasticts Ltd.	Terrafoam (Type 2, Tapered)	‒	110	16	0.7	4.04
Beaver Plasticts Ltd.	Terrafoam (Type 3, Tapered)	‒	140	20.4	0.74	4.27
Plasti-Fab	Plastispan Insulation (Type 1)	‒	70	10	0.65	3.75
Plasti-Fab	Plastispan HD Insulation (Type 2)	‒	110	16	0.7	4.04
Plasti-Fab	Plastispan 25 Insulation (Type 3)	‒	140	20	0.74	4.27
Plasti-Fab	Plastispan Sloped Insulation	‒	‒	‒	‒	‒

Polyisocyanurate Foam

Expand

"Polyiso" Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.

Manufacturer	Product Name	System Test Type (Wind)	Density (kg/m3)	Compressive Strength (kPa)	Compressive Strength (psi)	Thermal Resistance (RSI/25.4 mm)	Thermal Resistance (R/inch)
Atlas Roofing Corporation	AC Foam III	‒	32	138	20	1	5.7
Atlas Roofing Corporation	AC Foam Supreme	‒	32	138	20	1	5.7
Carlisle Syntec Systems Canada	SecurShield HD Plus	MARS PARS	‒	138	20	1	5.7
Carlisle Syntec Systems Canada	SecurShield RapidLock (RL) Polyiso	‒	‒	138	20	1	5.7
Carlisle Syntec Systems Canada	SecurShield RapidLock (RL) HD Polyiso	‒	‒	138	20	1	5.7
Elevate (fomerly Firestone)	ISOGARD CG	‒	32	138	20	1	5.7
Hunter Panels	H-Shield CG	‒	32	138	20	1	5.7
Hunter Panels	H-Shield Premier	‒	32	138	20	1	5.7
Hunter Panels	H-Shield Composite	‒	32	138	20	1	5.7
IKO Industries Ltd.	IKOTherm III	‒	‒	140	20	1	5.7
Johns Manville Corporation	ENRGY 3 CGF Insulation	‒	‒	138	20	1	5.7
Polyglass USA, Inc.	Polytherm G	‒	32.04	138	20	1	5.7
Siplast, Inc.	Paratherm CG	‒	‒	138	20	1	5.7
Soprema Inc.	Sopra-Iso Plus	‒	32	138	20	1	5.7

Fibreboard Roof Insulation

Expand

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

Manufacturer	Product Name	System Test Type (Wind)	Description	Density (kg/cu. m)	Compressive Strength (kPa)	Compressive Strength (psi)	Thermal Resistance (RSI)	Thermal Resistance (R/inch)
IKO Industries Ltd.	Asphalt Fibreboard	‒	Impregnated/Coated	‒	‒	‒	‒	‒
MSL	Petroleum Paraffin Natural	‒	Natural Fibreboard	‒	‒	‒	‒	‒
MSL	Petroleum Paraffin HD	‒	High Density Fibreboard	‒	‒	‒	‒	‒
MSL	Asphalt Coated (6 sides)	‒	Asphalt Coated - 6 sides (Natural Fibreboard)	‒	‒	‒	‒	‒
MSL	Asphalt and Wax Impregnated Fibreboard	‒	Asphalt and Wax-impregnated	‒	‒	‒	‒	‒
MSL	Asphalt and Wax Impregnated HD	‒	Asphalt and Wax-impregnated HD	‒	‒	‒	‒	‒
MSL	Securpan	‒	Fire-resistant fibreboard	‒	‒	‒	‒	‒
MSL	Securpan (asphalt coated)	‒	Asphalt-coated on 1 side / fire-resistant	‒	‒	‒	‒	‒

Perlitic Insulation

Expand

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

Manufacturer	Product Name	System Test Type (Wind)	Density (kg/cu. m)	Compressive Strength (kPa)	Compressive Strength (psi)	Thermal Resistance (RSI)	Thermal Resistance (R/inch)
Johns Manville Corporation	Fesco Board	‒	‒	‒	‒	0.49	2.78

Mineral Fibre Roof Insulation

Expand

Mineral Fibre Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.

Manufacturer	Product Name	System Test Type (Wind)	Density (kg/cu. m)	Compressive Strength (kPa)	Compressive Strength (psi)	Thermal Resistance (RSI/25.4 mm)	Thermal Resistance (R/inch)
ROCKWOOL	TOPROCK® DD	‒	See TDS	See TDS	See TDS	0.62	3.5
ROCKWOOL	TOPROCK® DD PLUS	‒	See TDS	See TDS	See TDS	0.62	3.5
ROCKWOOL	MULTIFIX TM	‒	See TDS	See TDS	See TDS	0.68	3.8
Soprema Inc.	Soprarock DD	‒	See TDS	See TDS	See TDS	0.62	3.5
Soprema Inc.	Soprarock DD PLUS	‒	See TDS	See TDS	See TDS	0.62	3.5
Soprema Inc.	Soprarock MD	‒	See TDS	See TDS	See TDS	See TDS	See TDS
Soprema Inc.	Soprarock MD Plus	‒	See TDS	See TDS	See TDS	See TDS	See TDS

Lightweight Insulating Concrete

Expand

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

Manufacturer	Product Name	System Test Type (Wind)	Density (kg/cu. m)	Compressive Strength (kPa)	Compressive Strength (psi)	Thermal Resistance (RSI)	Thermal Resistance (R/inch)
Siplast	NVS Concrete	‒	560	2070	300	N/A	N/A
Siplast	INSULCEL Concrete	‒	480	1380	200	N/A	N/A

4 Insulation Overlay Boards

Fibreboard

Expand

Template:Materials - Insulation Overlay (Fibreboard)

Proprietary Insulation Overlay Boards

Expand

Template:Materials - Insulation Overlay (Proprietary)

5 Insulation Joint Tape

Expand

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

Manufacturer	Product Name	Applicable Standard	Type
Hal Industries Inc.	Therma-Tape	N/A	TBA
Hal Industries Inc.	Perma-Tape	N/A	TBA

6 Membranes

Expand

TPO Membranes

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

Manufacturer	Product Name	System Compliant with CSA A123.21	Nominal Membrane Thickness (mils/mm)	Approximate Weight (Kg/m2)	Reinforcement Material	Reinforcement Material Weight (g/m2)	Application
Atlas Roofing Corporation	Glassmaster (25/26/27)
Atlas Roofing Corporation	GlassMaster T-Lok
Atlas Roofing Corporation	Pinnacle
Atlas Roofing Corporation	Pinnacle Plus
Atlas Roofing Corporation	StormMaster LM (SBS)
Atlas Roofing Corporation	StormMaster ST (SBS)
Carlisle Syntec Systems Canada	Sure-Weld 45 mil TPO Membrane		45
Carlisle Syntec Systems Canada	Sure-Weld 60 mil TPO Membrane		60
Carlisle Syntec Systems Canada	Sure-Weld 80 mil TPO Membrane		80
Carlisle Syntec Systems Canada	FleeceBACK 100 mil (045) TPO Membrane		100
Firestone Building Products	Ultraply 1.2 mm TPO Membrane
Firestone Building Products	UltraPly 1.6 mm TPO Membrane
Firestone Building Products	UltraPly XR 100
Firestone Building Products	UltraPly XR 115
GAF	EverGuard TSR-45 (FULL ROLL)		45
GAF	EverGuard TSR-45 (HALF ROLL)		45
GAF	EverGuardTSR-60 (FULL ROLL)		60
GAF	EverGuardTSR-60 (HALF ROLL)		60
GAF	EverGuardTSR-80 (FULL ROLL)		80
GAF	EverGuardTSR-80 (HALF ROLL)		80
GAF	EverGuard TFB TPO Membrane
GAF	EverGuard Freedom TPO HW
GAF	EverGuard TSR-45 (FULL ROLL)		45
GAF	EverGuard TSR-45 (HALF ROLL)		45
GAF	EverGuardTSR-60 (FULL ROLL)		60
GAF	EverGuardTSR-60 (HALF ROLL)		60
GAF	EverGuardTSR-80 (FULL ROLL)		80
GAF	EverGuardTSR-80 (HALF ROLL)		80
GAF	EverGuard TFB TPO Membrane
GAF	EverGuard Freedom TPO HW
Johns Manville Corporation	JM TPO-45		45
Johns Manville Corporation	JM TPO-60		60
Johns Manville Corporation	JM TPO-80		80
Mule-Hide Products Co., Inc.	Reinforced TPO Membrane

PVC Membranes

7 Fasteners & Other Accessories

Expand

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
For links to wind test reports for individual materials listed as MARS, PARS or AARS, click on the Product Name

Manufacturer	Product Name	Links to Comparative Wind Test Tables	Nominal Membrane Thickness (mm)	Approximate Weight (Kg/m2)	Reinforcement Material	Reinforcement Material Weight (g/m2)	Application
Carlisle Syntec Systems Canada	Sure-Flex 50 mil PVC Membrane	MARS PARS	50/-	‒	‒	‒	‒
Carlisle Syntec Systems Canada	Sure-Flex 60 mil PVC Membrane	‒	60/-	‒	‒	‒	‒
Carlisle Syntec Systems Canada	Sure-Flex 80 mil PVC Membrane	‒	80/-	‒	‒	‒	‒
Carlisle Syntec Systems Canada	Sure-Flex FRS 50 mil PVC Membrane	‒	50/-	‒	‒	‒	‒
Carlisle Syntec Systems Canada	Sure-Flex FRS 60 mil PVC Membrane	‒	60/-	‒	‒	‒	‒
Carlisle Syntec Systems Canada	Sure-Flex FRS 80 mil PVC Membrane	‒	80/-	‒	‒	‒	‒
Duro-Last Roofing, Inc.	Duro-Last 50 mil. PVC	‒	50/-	‒	‒	‒	‒
Duro-Last Roofing, Inc.	Duro-Last 60 mil. PVC	‒	60/-	‒	‒	‒	‒
Johns Manville Corporation	JM PVC (50 mil.)	‒	50/-	‒	‒	‒	‒
Johns Manville Corporation	JM PVC (60 mil.)	‒	60/-	‒	‒	‒	‒
Johns Manville Corporation	JM PVC (80 mil.)	‒	80/-	‒	‒	‒	‒
Johns Manville Corporation	JM PVC Fleece Backed (50 mil.)	‒	50/-	‒	‒	‒	‒
Johns Manville Corporation	JM PVC Fleece Backed (60 mil.)	‒	60/-	‒	‒	‒	‒
Johns Manville Corporation	JM PVC Fleece Backed (80 mil.)	‒	80/-	‒	‒	‒	‒
Sika Canada Inc. (Sarnafil)	Sarnafil G410 EnergySmart	‒	‒	‒	‒	‒	‒
Sika Canada Inc. (Sarnafil)	Sarnafil G410 Textured	‒	‒	‒	‒	‒	‒
Sika Canada Inc. (Sarnafil)	Sarnafil G459 (Flashing Membrane)	‒	‒	‒	‒	‒	‒
Sika Canada Inc. (Sarnafil)	Sarnafil S327 EnergySmart	‒	‒	‒	‒	‒	‒
Sika Canada Inc. (Sarnafil)	Sarnafil S327 Textured	‒	‒	‒	‒	‒	‒

An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the waterproofing or water-shedding capabilities of the system. Accessories are not currently part of the Accepted Material program, but are listed here for reference to specifiers, designers and installers.

MembranesCoatingsJoints and Unions

These membranes are not Accepted for use in the primary waterproofing system, but may be use as for an ancillary function - for example, as protective membranes (a 'sacrificial' cap membrane).

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

Manufacturer	Product Name	Description	Application Method	Suitability
Polyglass USA, Inc.	Polyfresko G SA	APP membrane	Self-adhering	Walkways, accessory surfaces
Polyglass USA, Inc.	Polyfresko G FR	APP membrane (fire resistant)	Heat-welding	Walkways, accessory surfaces
Polyglass USA, Inc.	Polyfresko G	APP membrane	Heat-welding, hot asphalt, cold processing	Walkways, accessory surfaces
Polyglass USA, Inc.	Polyflex G FR	APP membrane (fire resistant)	Heat-welding	Walkways, accessory surfaces
Polyglass USA, Inc.	Polyflex G HP	APP membrane	Heat-welding, hot asphalt, cold processing	Walkways, accessory surfaces

Coatings are not a waterproofing product, but rather enhance solar reflectivity or other properties of a membrane. The inclusion of these materials, although acceptable under the RoofStar Guarantee Program, is not part of the Guarantee.

Click on a manufacturer's name to see the full list of their products listed for use in the RoofStar Guarantee Program

Manufacturer	Product Name	Description	Application	Applicator Training
Soprema Inc.	R-Nova Plus	polyurethane/acrylic-based waterproofing liquid membrane/coating	See Product Details	Consult Manufacturer
Soprema Inc.	R-Nova Plus Mastic	polyurethane/acrylic-based waterproofing liquid mastic	See Product Details	Consult Manufacturer
Soprema Inc.	R-Nova Plus Matrix	polyurethane/acrylic-based waterproofing liquid paste	See Product Details	Consult Manufacturer

Click on a manufacturer's name to see the full list of their products listed for use in the RoofStar Guarantee Program

Manufacturer	Product Name	Type	Size
Soprema Inc.	Soprajoint Plus 20	expansion joint for low-slope membrane systems	‒
Soprema Inc.	Soprajoint Plus 40	expansion joint for low-slope membrane systems	‒
Soprema Inc.	Soprajoint Plus 75	expansion joint for low-slope membrane systems	‒
Soprema Inc.	Soprajoint Plus 125	expansion joint for low-slope membrane systems	‒

---

TPO/PVC Roof Systems

Accepted Materials

Application