Difference between revisions of "ARCHIVED - Duro-Last PVC Membrane"

Latest revision as of 13:59, 9 September 2021

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Duro-Last Roofing, Inc. Accepted for RoofStar Guarantee Program Date TBA Product Summary Roof Assembly: MECHANICALLY FASTENED MEMBRANE, INSULATED AND UN-INSULATED SYSTEMS Slope Limitation: Consult the manufacturer's product Specifications. In-Service Performance Min. -26°c (-15°F) Temperature of the Membrane Max.: 46°c (115°F) Roof Assembly: ADHERED MEMBRANE, INSULATED AND UNINSULATED SYSTEMS Slope Limitation: Consult the manufacturer's product Specifications. In-Service Performance Min. 15°c (50°F) Temperature of the Membrane Max.: 32°c (90°F) Installation Guidelines

Click below for the Technical Data Sheet

1.27 mm (50 mil) Membrane TDS

1.52 mm (60 mil) Membrane TDS

Revision as of 16:21, 25 August 2020 (view source) James Klassen (talk \| contribs) m (James Klassen moved page Materials:Duro-Last 50 mil. PVC to Materials:Duro-Last PVC Membrane) ← Older edit	Latest revision as of 13:59, 9 September 2021 (view source) James Klassen (talk \| contribs) m (James Klassen moved page Materials:ARCHIVED - Duro-Last PVC Membrane to ARCHIVED - Duro-Last PVC Membrane)
(One intermediate revision by the same user not shown)
(No difference)