Materials:Soprarock DD PLUS

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc. Accepted for RoofStar Guarantee Program Date TBA Product Summary Soprarock DD is dual-density mineral wool with a rigid upper surface for durability and enhanced strength. It is intended for use as a primary insulation in commercial, industrial, and institutional new and re-roof applications and can be mechanically fastened or hot mopped in a full bed of bitumen. Soprarock DD PLUS has an integral bitumen coating applied to allow for torch applied, hot applied or cold applied adhered membrane assemblies direct to the insulation without the use of a coverboard. Thickness - mm (inches) - 25 (1”) to 150 (6”) in 12mm (1/2”) increments Dimensions - m (ft) - .12 x 1.2 (4’ x 4’) Long Term Thermal Resistance - Stable - ASTM C518 (C 177) - RSI Value - 0.65 (R 3.7) per 25mm (1”) Compressive Strength - ASTM C 165 Top Layer at 10% - kPa (psi) 139 (20.2 psi) Top Layer at 25% - kPa (psi) 252 (37.0 psi) 75mm (3”) thickness - kPs (psi) 71 (10.3 psi) 75mm (3”) thickness - kPa (psi) 103.5 (15psi) Density (kg/m3) - Formed as a monolithic structure - ASTM C612-00 - Actual Top Layer - 220 (13.75 lb/ft3) Bottom - Layer - 160 (10.0 lb/ft3) Dimensional Stability - Linear Shrinkage (% at 177C (350F) - ASTM C 356 - 0.01% Water Absorption (%) - ASTM C 209 - < 1.0 Water Vapour Sorption - ASTM C 1104 - 0.03 Soprema Inc. may modify the composition of its products without prior notice. Consequently orders will be filled according to the latest specifications.

Click below for the Technical Data Sheet.

---

Back to Accepted Materials

Home