Difference between revisions of "Template:PARS Membrane - SBS 2-Ply Base"

Revision as of 16:30, 27 June 2018

How to use the table:
In the table below look for maximum wind uplift values that exceed the requirements determined through the RCI calculator;
(**NOTE**: while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)

Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the **RoofStar Guarantee Program** (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);

In cases where a tested Secondary material is not accepted by the **RoofStar Guarantee Program**, look for alternates which often are published in the each report. In the absence of published alternates, locate a possible alternate in the **Accepted Materials** section of this Manual. If you are unsure about compatibility, contact the **RCABC**.
Manufacturer	Product Name	Number of Tested Systems (per report)	kPa (Low)	kPa (High)	Psf (Low)	Psf (High)	Deck Type	Downloadable Test Report	Test Facility	Test Facility Report No.
Firestone Building Products	SBS Poly Base	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Firestone Building Products	SBS Base	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Firestone Building Products	SBS Premium Base	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Firestone Building Products	SBS Poly Torch Base	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Firestone Building Products	BaseGard SA	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Henry Company Canada	Modified Plus NP180 Tack	1 Tested System	----	-4.67	----	-97.50	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Polyglass USA, Inc.	Elastobase	1 Tested System	----	-3.10	----	-64.00	Steel	PARS Test Report 8 PARS Test Report 9 PARS Test Report 10 PARS Test Report 11 PARS Test Report 12 PARS Test Report 13 PARS Test Report 14	NEMO, etc.	PLYG-PARS-1.15 PLYG-PARS-1.16 PLYG-PARS-1.17 PLYG-PARS-1.18 PLYG-PARS-1.19 PLYG-PARS-1.20 PLYG-PARS-1.21
Polyglass USA, Inc.	Elastoflex S6 2.5 (S/S, P/S)	1 Tested System	----	-3.10	----	-64.00	Steel	PARS Test Report 9 PARS Test Report 10 PARS Test Report 11 PARS Test Report 12 PARS Test Report 13 PARS Test Report 14 PARS Test Report 15 PARS Test Report 16 PARS Test Report 17 PARS Test Report 18 PARS Test Report 19 PARS Test Report 20 PARS Test Report 21	NEMO, etc.	PLYG-PARS-1.16 PLYG-PARS-1.17 PLYG-PARS-1.18 PLYG-PARS-1.19 PLYG-PARS-1.20 PLYG-PARS-1.21 PLYG-PARS-1.22 PLYG-PARS-1.23 PLYG-PARS-1.24 PLYG-PARS-1.25 PLYG-PARS-2 PLYG-PARS-3 PLYG-PARS-4
Polyglass USA, Inc.	Elastoflex S6 3.0 (P/P)	1 Tested System	----	-3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.40 -1.40 -1.80 -3.40	----	-64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -70.00 -30.00 -38.00 -72.00	Steel	PARS Test Report 8 PARS Test Report 9 PARS Test Report 10 PARS Test Report 11 PARS Test Report 12 PARS Test Report 13 PARS Test Report 14 PARS Test Report 15 PARS Test Report 16 PARS Test Report 17 PARS Test Report 18 PARS Test Report 19 PARS Test Report 20 PARS Test Report 21 PARS Test Report 22	NEMO, etc.	PLYG-PARS-1.15 PLYG-PARS-1.16 PLYG-PARS-1.17 PLYG-PARS-1.18 PLYG-PARS-1.19 PLYG-PARS-1.20 PLYG-PARS-1.21 PLYG-PARS-1.22 PLYG-PARS-1.23 PLYG-PARS-1.24 PLYG-PARS-1.25 PLYG-PARS-2 PLYG-PARS-3 PLYG-PARS-4 PLYG-PARS-5.1
Polyglass USA, Inc.	Elastoflex V	1 Tested System	----	-3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.10 -3.40 -1.40 -1.80 -3.40	----	-64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -64.00 -70.00 -30.00 -38.00 -72.00	Steel	PARS Test Report 8 PARS Test Report 9 PARS Test Report 10 PARS Test Report 11 PARS Test Report 12 PARS Test Report 13 PARS Test Report 14 PARS Test Report 15 PARS Test Report 19 PARS Test Report 20 PARS Test Report 21 PARS Test Report 22	NEMO, etc.	PLYG-PARS-1.15 PLYG-PARS-1.16 PLYG-PARS-1.17 PLYG-PARS-1.18 PLYG-PARS-1.19 PLYG-PARS-1.20 PLYG-PARS-1.21 PLYG-PARS-1.22 PLYG-PARS-2 PLYG-PARS-3 PLYG-PARS-4 PLYG-PARS-5.1
Polyglass USA, Inc.	Elastoflex SA V	1 Tested System	----	-3.10	----	-64.00	Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 4 PARS Test Report 5 PARS Test Report 6 PARS Test Report 7	NEMO, etc.	PLYG-PARS-1.8 PLYG-PARS-1.9 PLYG-PARS-1.10 PLYG-PARS-1.11 PLYG-PARS-1.12 PLYG-PARS-1.13 PLYG-PARS-1.14
Polyglass USA, Inc.	Elastoflex SA V FR	1 Tested System	----	-3.10	----	-64.00	Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 4 PARS Test Report 5 PARS Test Report 6 PARS Test Report 7	NEMO, etc.	PLYG-PARS-1.8 PLYG-PARS-1.9 PLYG-PARS-1.10 PLYG-PARS-1.11 PLYG-PARS-1.12 PLYG-PARS-1.13 PLYG-PARS-1.14
Siplast	Paradiene 20	1 Tested System 1 Tested System 1 Tested System 1 Tested System	---- ---- ---- ----	-2.23 -3.35 -2.87 -2.90	---- ---- ---- ----	-46.67 -70.00 -60.00 -60.00	Steel Steel Steel Steel	PARS Test Report 3 PARS Test Report 4 PARS Test Report 5 PARS Test Report 8	Intertek Intertek Intertek exp. Service Inc.	E9988.03-109-44 E9988.05-109-44 E9988.06-109-44 SIPZ-DRS-00215482-01-5100
Siplast	Paradiene 20 TG	1 Tested System 1 Tested System 1 Tested System 1 Tested System	---- ---- ---- ----	-1.40 -1.80 -2.86 -1.46	---- ---- ---- ----	-30.00 -37.00 -60.00 -30.00	Plywood Steel Steel Steel	PARS Test Report 2 PARS Test Report 6 PARS Test Report 7 PARS Test Report 9	Intertek exp. Service Inc. exp. Service Inc. exp. Service Inc.	E998.02-109-44 SIPZ-DRS-00221706-02-5100 SIPZ-DRS-00221706-01-5100 SIPZ-DRS-00221706-03-5100
Siplast	Paradiene 20 SA	1 Tested System	----	-1.90	----	-40.00	Steel	PARS Test Report 1	Intertek	E9988.01-109-44
Soprema Inc.	Elastophene Flam	1 Tested System 4 Tested Systems 3 Tested Systems	---- -1.40 -2.10	-2.900 -3.40 -5.00	---- -30.00 -45.00	-60.00 -70.00 -105.00	Steel Steel Steel	PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU293332 PUB-DRU304337 PUB-DRU293389
Soprema Inc.	Sopraflash Flam Stick	3 Tested Systems	-1.40	-2.80	-30.00	-58.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU305544
Soprema Inc.	Sopralene Flam 180	1 Tested System 4 Tested Systems	---- -1.40	-2.90 -3.40	---- -30.00	-60.00 -70.00	Steel Steel	PARS Test Report 2 PARS Test Report 3	exp. Service Inc.	PUB-DRU293332 PUB-DRU304337
Soprema Inc.	Sopralene Flam 250	1 Tested System 4 Tested Systems 3 Tested Systems	---- -1.40 -2.10	-2.90 -3.40 -5.00	---- -30.00 -45.00	-60.00 -70.00 -105.00	Steel Steel Steel	PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU293332 PUB-DRU304337 PUB-DRU293389
Soprema Inc.	Sopraply Base 520	1 Tested System 4 Tested Systems 3 Tested Systems	---- -1.40 -2.10	-2.90 -3.40 -5.00	---- -30.00 -45.00	-60.00 -70.00 -105.00	Steel Steel Steel	PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU293332 PUB-DRU304337 PUB-DRU293389

@@ Line 29: / Line 29: @@
 ||	'''[[Firestone Building Products]]'''	||	[[Materials:BaseGard SA |BaseGard SA]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-2.10	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-45.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/7/7f/FSTONE-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
 |-
-||	'''[[Henry Company Canada]]'''	||	[[Materials:Modified Plus NP180 Tack|Modified Plus NP180 Tack]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-4.67	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-97.50	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/f/fe/HENRY-PARS1.pdf '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
+||	'''[[Henry Company Canada]]'''	||	[[Materials:Modified Plus NP180 Tack|Modified Plus NP180 Tack]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-4.67	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-97.50	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/f/fe/HENRY-PARS1.pdf  '''PARS Test Report 1''']	||	style="text-align:center;"|	exp. Service Inc.	||	style="text-align:center;"|	PUB-DRU281261
+|-
+||	'''[[Polyglass USA, Inc.]]'''	||	[[Materials:Elastobase|Elastobase]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-3.10	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-64.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/d/d1/POLYG-PARS8.pdf '''PARS Test Report 8''']<br>[http://rpm.rcabc.org/images/b/b5/POLYG-PARS9.pdf '''PARS Test Report 9''']<br>[http://rpm.rcabc.org/images/2/21/POLYG-PARS10.pdf '''PARS Test Report 10''']<br>[http://rpm.rcabc.org/images/7/7e/POLYG-PARS11.pdf '''PARS Test Report 11''']<br>[http://rpm.rcabc.org/images/7/75/POLYG-PARS12.pdf '''PARS Test Report 12''']<br>[http://rpm.rcabc.org/images/c/cc/POLYG-PARS13.pdf '''PARS Test Report 13''']<br>[http://rpm.rcabc.org/images/c/cd/POLYG-PARS14.pdf '''PARS Test Report 14''']	||	style="text-align:center;"|	NEMO, etc.	||	style="text-align:center;"|	PLYG-PARS-1.15<br>PLYG-PARS-1.16<br>PLYG-PARS-1.17<br>PLYG-PARS-1.18<br>PLYG-PARS-1.19<br>PLYG-PARS-1.20<br>PLYG-PARS-1.21
+|-
+||	'''[[Polyglass USA, Inc.]]'''	||	[[Materials:Elastoflex S6 2.5|Elastoflex S6 2.5 (S/S, P/S)]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-3.10	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-64.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/b/b5/POLYG-PARS9.pdf '''PARS Test Report 9''']<br>[http://rpm.rcabc.org/images/2/21/POLYG-PARS10.pdf '''PARS Test Report 10''']<br>[http://rpm.rcabc.org/images/7/7e/POLYG-PARS11.pdf '''PARS Test Report 11''']<br>[http://rpm.rcabc.org/images/7/75/POLYG-PARS12.pdf '''PARS Test Report 12''']<br>[http://rpm.rcabc.org/images/c/cc/POLYG-PARS13.pdf '''PARS Test Report 13''']<br>[http://rpm.rcabc.org/images/c/cd/POLYG-PARS14.pdf '''PARS Test Report 14''']<br>[http://rpm.rcabc.org/images/1/1b/POLYG-PARS15.pdf '''PARS Test Report 15''']<br>[http://rpm.rcabc.org/images/2/2f/POLYG-PARS16.pdf '''PARS Test Report 16''']<br>[http://rpm.rcabc.org/images/6/66/POLYG-PARS17.pdf '''PARS Test Report 17''']<br>[http://rpm.rcabc.org/images/c/cf/POLYG-PARS18.pdf '''PARS Test Report 18''']<br>[http://rpm.rcabc.org/images/7/72/POLYG-PARS19.pdf '''PARS Test Report 19''']<br>[http://rpm.rcabc.org/images/d/d5/POLYG-PARS20.pdf '''PARS Test Report 20''']<br>[http://rpm.rcabc.org/images/4/4e/POLYG-PARS21.pdf '''PARS Test Report 21''']	||	style="text-align:center;"|	NEMO, etc.	||	style="text-align:center;"|	PLYG-PARS-1.16<br>PLYG-PARS-1.17<br>PLYG-PARS-1.18<br>PLYG-PARS-1.19<br>PLYG-PARS-1.20<br>PLYG-PARS-1.21<br>PLYG-PARS-1.22<br>PLYG-PARS-1.23<br>PLYG-PARS-1.24<br>PLYG-PARS-1.25<br>PLYG-PARS-2<br>PLYG-PARS-3<br>PLYG-PARS-4
+|-
+||	'''[[Polyglass USA, Inc.]]'''	||	[[Materials:Elastoflex S6 3.0|Elastoflex S6 3.0 (P/P)]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.40<br>-1.40<br>-1.80<br>-3.40	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-70.00<br>-30.00<br>-38.00<br>-72.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/d/d1/POLYG-PARS8.pdf '''PARS Test Report 8''']<br>[http://rpm.rcabc.org/images/b/b5/POLYG-PARS9.pdf '''PARS Test Report 9''']<br>[http://rpm.rcabc.org/images/2/21/POLYG-PARS10.pdf '''PARS Test Report 10''']<br>[http://rpm.rcabc.org/images/7/7e/POLYG-PARS11.pdf '''PARS Test Report 11''']<br>[http://rpm.rcabc.org/images/7/75/POLYG-PARS12.pdf '''PARS Test Report 12''']<br>[http://rpm.rcabc.org/images/c/cc/POLYG-PARS13.pdf '''PARS Test Report 13''']<br>[http://rpm.rcabc.org/images/c/cd/POLYG-PARS14.pdf '''PARS Test Report 14''']<br>[http://rpm.rcabc.org/images/1/1b/POLYG-PARS15.pdf '''PARS Test Report 15''']<br>[http://rpm.rcabc.org/images/2/2f/POLYG-PARS16.pdf '''PARS Test Report 16''']<br>[http://rpm.rcabc.org/images/6/66/POLYG-PARS17.pdf '''PARS Test Report 17''']<br>[http://rpm.rcabc.org/images/c/cf/POLYG-PARS18.pdf '''PARS Test Report 18''']<br>[http://rpm.rcabc.org/images/7/72/POLYG-PARS19.pdf '''PARS Test Report 19''']<br>[http://rpm.rcabc.org/images/d/d5/POLYG-PARS20.pdf '''PARS Test Report 20''']<br>[http://rpm.rcabc.org/images/4/4e/POLYG-PARS21.pdf '''PARS Test Report 21''']<br>[http://rpm.rcabc.org/images/5/54/POLYG-PARS22.pdf '''PARS Test Report 22''']	||	style="text-align:center;"|	NEMO, etc.	||	style="text-align:center;"|	PLYG-PARS-1.15<br>PLYG-PARS-1.16<br>PLYG-PARS-1.17<br>PLYG-PARS-1.18<br>PLYG-PARS-1.19<br>PLYG-PARS-1.20<br>PLYG-PARS-1.21<br>PLYG-PARS-1.22<br>PLYG-PARS-1.23<br>PLYG-PARS-1.24<br>PLYG-PARS-1.25<br>PLYG-PARS-2<br>PLYG-PARS-3<br>PLYG-PARS-4<br>PLYG-PARS-5.1
+|-
+||	'''[[Polyglass USA, Inc.]]'''	||	[[Materials:Elastoflex V|Elastoflex V]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.10<br>-3.40<br>-1.40<br>-1.80<br>-3.40	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-64.00<br>-70.00<br>-30.00<br>-38.00<br>-72.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/d/d1/POLYG-PARS8.pdf '''PARS Test Report 8''']<br>[http://rpm.rcabc.org/images/b/b5/POLYG-PARS9.pdf '''PARS Test Report 9''']<br>[http://rpm.rcabc.org/images/2/21/POLYG-PARS10.pdf '''PARS Test Report 10''']<br>[http://rpm.rcabc.org/images/7/7e/POLYG-PARS11.pdf '''PARS Test Report 11''']<br>[http://rpm.rcabc.org/images/7/75/POLYG-PARS12.pdf '''PARS Test Report 12''']<br>[http://rpm.rcabc.org/images/c/cc/POLYG-PARS13.pdf '''PARS Test Report 13''']<br>[http://rpm.rcabc.org/images/c/cd/POLYG-PARS14.pdf '''PARS Test Report 14''']<br>[http://rpm.rcabc.org/images/1/1b/POLYG-PARS15.pdf '''PARS Test Report 15''']<br>[http://rpm.rcabc.org/images/7/72/POLYG-PARS19.pdf '''PARS Test Report 19''']<br>[http://rpm.rcabc.org/images/d/d5/POLYG-PARS20.pdf '''PARS Test Report 20''']<br>[http://rpm.rcabc.org/images/4/4e/POLYG-PARS21.pdf '''PARS Test Report 21''']<br>[http://rpm.rcabc.org/images/5/54/POLYG-PARS22.pdf '''PARS Test Report 22''']	||	style="text-align:center;"|	NEMO, etc.	||	style="text-align:center;"|	PLYG-PARS-1.15<br>PLYG-PARS-1.16<br>PLYG-PARS-1.17<br>PLYG-PARS-1.18<br>PLYG-PARS-1.19<br>PLYG-PARS-1.20<br>PLYG-PARS-1.21<br>PLYG-PARS-1.22<br>PLYG-PARS-2<br>PLYG-PARS-3<br>PLYG-PARS-4<br>PLYG-PARS-5.1
+|-
+||	'''[[Polyglass USA, Inc.]]'''	||	[[Materials:Elastoflex SA V|Elastoflex SA V]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-3.10	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-64.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/3f/POLYG-PARS1.pdf '''PARS Test Report 1''']<br>[http://rpm.rcabc.org/images/7/78/POLYG-PARS2.pdf '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/2/27/POLYG-PARS3.pdf '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/0/00/POLYG-PARS4.pdf '''PARS Test Report 4''']<br>[http://rpm.rcabc.org/images/5/5e/POLYG-PARS5.pdf '''PARS Test Report 5''']<br>[http://rpm.rcabc.org/images/6/67/POLYG-PARS6.pdf '''PARS Test Report 6''']<br>[http://rpm.rcabc.org/images/a/a1/POLYG-PARS7.pdf '''PARS Test Report 7''']	||	style="text-align:center;"|	NEMO, etc.	||	style="text-align:center;"|	PLYG-PARS-1.8<br>PLYG-PARS-1.9<br>PLYG-PARS-1.10<br>PLYG-PARS-1.11<br>PLYG-PARS-1.12<br>PLYG-PARS-1.13<br>PLYG-PARS-1.14
+|-
+||	'''[[Polyglass USA, Inc.]]'''	||	[[Materials:Elastoflex SA V FR|Elastoflex SA V FR]]	||	style="text-align:center;"|	1 Tested System	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-3.10	||	style="text-align:center;"|	----	||	style="text-align:center;"|	-64.00	||	style="text-align:center;"|	Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/3/3f/POLYG-PARS1.pdf '''PARS Test Report 1''']<br>[http://rpm.rcabc.org/images/7/78/POLYG-PARS2.pdf '''PARS Test Report 2''']<br>[http://rpm.rcabc.org/images/2/27/POLYG-PARS3.pdf '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/0/00/POLYG-PARS4.pdf '''PARS Test Report 4''']<br>[http://rpm.rcabc.org/images/5/5e/POLYG-PARS5.pdf '''PARS Test Report 5''']<br>[http://rpm.rcabc.org/images/6/67/POLYG-PARS6.pdf '''PARS Test Report 6''']<br>[http://rpm.rcabc.org/images/a/a1/POLYG-PARS7.pdf '''PARS Test Report 7''']	||	style="text-align:center;"|	NEMO, etc.	||	style="text-align:center;"|	PLYG-PARS-1.8<br>PLYG-PARS-1.9<br>PLYG-PARS-1.10<br>PLYG-PARS-1.11<br>PLYG-PARS-1.12<br>PLYG-PARS-1.13<br>PLYG-PARS-1.14
 |-
 ||	'''[[Siplast]]'''	||	[[Materials:Paradiene 20|Paradiene 20]]	||	style="text-align:center;"|	1 Tested System<br>1 Tested System<br>1 Tested System<br>1 Tested System	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-2.23<br>-3.35<br>-2.87<br>-2.90	||	style="text-align:center;"|	----<br>----<br>----<br>----	||	style="text-align:center;"|	-46.67<br>-70.00<br>-60.00<br>-60.00	||	style="text-align:center;"|	Steel<br>Steel<br>Steel<br>Steel	||	style="text-align:center;"|	[http://rpm.rcabc.org/images/c/cd/SIP-PARS3.pdf  '''PARS Test Report 3''']<br>[http://rpm.rcabc.org/images/9/9f/SIP-PARS4.pdf  '''PARS Test Report 4''']<br>[http://rpm.rcabc.org/images/6/69/SIP-PARS5.pdf  '''PARS Test Report 5''']<br>[http://rpm.rcabc.org/images/0/0e/SIP-PARS8.pdf '''PARS Test Report 8'''] 	||	style="text-align:center;"|	Intertek<br>Intertek<br>Intertek<br>exp. Service Inc.	||	style="text-align:center;"|	E9988.03-109-44<br>E9988.05-109-44<br>E9988.06-109-44<br>SIPZ-DRS-00215482-01-5100