Difference between revisions of "Asphalt Shingle System Details"

Jump to: navigation, search

Difference between revisions of "Asphalt Shingle System Details"

(OTHER DETAILS (Built-in Gutters))
(OTHER DETAILS (Built-in Gutters))
Line 71: Line 71:
  
 
====OTHER DETAILS (Built-in Gutters)====
 
====OTHER DETAILS (Built-in Gutters)====
:[[ASh 12.2.1 Built-in Gutter (Design)]]
+
:[[ASh 12.2.1 Built-in Gutter (Design) | ASh 12.2.1 Built-in Gutter (Design)]]
  
 
====METAL FLASHINGS====
 
====METAL FLASHINGS====

Revision as of 21:04, 7 September 2021



Division D - Construction Details

Construction Details for Asphalt Shingle Roof Systems
The drawings linked on this page are intended to represent a variety of Asphalt Shingle roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers’ specifications and the Standard for Asphalt Shingle Roof Systems to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
Asphalt Shingles.JPG

Pdf.png

NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.


1 GENERAL

2 SUPPORTING STRUCTURES: Decks and Walls

3 SECURING the ROOF ASSEMBLY

4 MATERIALS

5 DECK and WALL OVERLAYS

6 AIR, VAPOUR & VENTILATION CONTROLS

ASh 6.3.1 Air and Vapour Controls (field)

7 INSULATION

8 EAVE PROTECTION, UNDERLAYMENTS

9 FIELD SHINGLES

ASh 9.1.1 Shingle Application (All Slopes)
ASh 9.1.2 Shingle Application (Low Slopes)
ASh 9.1.3 Slope Change (Inside Angle)
ASh 9.1.4 Slope Change (Outside Angle)



Standard for SBS-modified Bitumen Membrane Roof Systems

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.