Difference between revisions of "Template:Materials - Waterproofing Membranes (SBS)"
Difference between revisions of "Template:Materials - Waterproofing Membranes (SBS)"
| Line 1: | Line 1: | ||
:<big><big>Base Membranes</big></big> | :<big><big>Base Membranes</big></big> | ||
| − | SBS (Styrene Butadiene Styrene) Modified Bituminous sheet waterproofing is prefabricated elastomeric membranes that are reinforced with mats consisting of polyester, fibreglass or a combination of both reinforcement types. SBS modified bituminous membranes are available in varied thicknesses with specific physical properties to satisfy the demands of particual waterproofing conditions as well as surface finishes that facilitate various application methods. | + | :SBS (Styrene Butadiene Styrene) Modified Bituminous sheet waterproofing is prefabricated elastomeric membranes that are reinforced with mats consisting of polyester, fibreglass or a combination of both reinforcement types. SBS modified bituminous membranes are available in varied thicknesses with specific physical properties to satisfy the demands of particual waterproofing conditions as well as surface finishes that facilitate various application methods. |
| − | '''Composition''' | + | :'''Composition''' |
| − | Bituminous and modified bituminous flexible membrane systems are composite sheet membranes which are thermoplastic in nature but display variable elastomeric properties when modified. These sheets generally consist of bitumen (oxidized or modified), reinforcement, and surfacing materials. The performance of these membranes may be compromised by subtle, seemingly inconsequential changes in composition. | + | :Bituminous and modified bituminous flexible membrane systems are composite sheet membranes which are thermoplastic in nature but display variable elastomeric properties when modified. These sheets generally consist of bitumen (oxidized or modified), reinforcement, and surfacing materials. The performance of these membranes may be compromised by subtle, seemingly inconsequential changes in composition. |
| − | The formulation of the bitumen is critical, particularly when its physical properties are modified by the addition of polymers. Bitumen is most commonly modified with styrene butadiene styrene (SBS). The manufacturer must ensure that a suitable degree of compatibility exists between the bitumen and the polymer and that a thorough mix has been obtained. The careful selection and combination of bitumen and polymer (the type of modifier, the percentage of polymer used, etc.) determines the physical properties and long term performance of the modified bituminous "binder". The binder provides the membrane with its waterproofing capability and may impart the following properties: | + | :The formulation of the bitumen is critical, particularly when its physical properties are modified by the addition of polymers. Bitumen is most commonly modified with styrene butadiene styrene (SBS). The manufacturer must ensure that a suitable degree of compatibility exists between the bitumen and the polymer and that a thorough mix has been obtained. The careful selection and combination of bitumen and polymer (the type of modifier, the percentage of polymer used, etc.) determines the physical properties and long term performance of the modified bituminous "binder". The binder provides the membrane with its waterproofing capability and may impart the following properties: |
| − | * low temperature flexibility | + | :* low temperature flexibility |
| − | * elasticity | + | :* elasticity |
| − | * high temperature resistance to flow | + | :* high temperature resistance to flow |
| − | * resistance to aging | + | :* resistance to aging |
| + | :The bitumen utilized for oxidized bituminous membranes has been "blown", similar to roofing asphalt. This produces a higher softening point and, therefore, a more useful temperature range. | ||
| − | The | + | :The physical properties of the binder are further enhanced by the imposition by saturation or coating onto a carrier or reinforcing mat, most commonly a textile such as: |
| − | + | :* non-woven spun-bonded polyester | |
| − | + | :* woven polyester scrim | |
| − | * non-woven spun-bonded polyester | + | :* fibreglass mats |
| − | * woven polyester scrim | + | :* woven fibreglass cloth |
| − | * fibreglass mats | + | :* combinations of the above. |
| − | * woven fibreglass cloth | ||
| − | * combinations of the above. | ||
{| class="wikitable sortable" style="margin-left: 20pt; margin-right: auto; border: none;" | {| class="wikitable sortable" style="margin-left: 20pt; margin-right: auto; border: none;" | ||
Revision as of 20:55, 4 October 2016
- Base Membranes
- SBS (Styrene Butadiene Styrene) Modified Bituminous sheet waterproofing is prefabricated elastomeric membranes that are reinforced with mats consisting of polyester, fibreglass or a combination of both reinforcement types. SBS modified bituminous membranes are available in varied thicknesses with specific physical properties to satisfy the demands of particual waterproofing conditions as well as surface finishes that facilitate various application methods.
- Composition
- Bituminous and modified bituminous flexible membrane systems are composite sheet membranes which are thermoplastic in nature but display variable elastomeric properties when modified. These sheets generally consist of bitumen (oxidized or modified), reinforcement, and surfacing materials. The performance of these membranes may be compromised by subtle, seemingly inconsequential changes in composition.
- The formulation of the bitumen is critical, particularly when its physical properties are modified by the addition of polymers. Bitumen is most commonly modified with styrene butadiene styrene (SBS). The manufacturer must ensure that a suitable degree of compatibility exists between the bitumen and the polymer and that a thorough mix has been obtained. The careful selection and combination of bitumen and polymer (the type of modifier, the percentage of polymer used, etc.) determines the physical properties and long term performance of the modified bituminous "binder". The binder provides the membrane with its waterproofing capability and may impart the following properties:
- low temperature flexibility
- elasticity
- high temperature resistance to flow
- resistance to aging
- The bitumen utilized for oxidized bituminous membranes has been "blown", similar to roofing asphalt. This produces a higher softening point and, therefore, a more useful temperature range.
- The physical properties of the binder are further enhanced by the imposition by saturation or coating onto a carrier or reinforcing mat, most commonly a textile such as:
- non-woven spun-bonded polyester
- woven polyester scrim
- fibreglass mats
- woven fibreglass cloth
- combinations of the above.
| Manufacturer | Product Name | Nominal Product Thickness (mm) | Approximate Weight (Kg/m2) | Reinforcement Material | Reinforcement Material Weight (g/m2) | Applicator Training |
|---|---|---|---|---|---|---|
| Garland Canada Inc. | Flexbase 120 | |||||
| Garland Canada Inc. | Flexbase E 120 | |||||
| Garland Canada Inc. | Flexbase PLUS 120 | |||||
| Garland Canada Inc. | Stressbase 120 | |||||
| IKO Industries Ltd.' | IKO Armourbridge / Pont | |||||
| IKO Industries Ltd.' | Armourbond Flash Base (Stripping) | |||||
| IKO Industries Ltd.' | Modiflex MP-180 F / S | |||||
| IKO Industries Ltd.' | Torchflex TF-95 FF Base | |||||
| IKO Industries Ltd.' | Torchflex TP-180-FF Base | |||||
| Soprema Inc. | Elastophene Flam | |||||
| Soprema Inc. | Colphene Flam 180 | |||||
| Soprema Inc. | Sopralene Flam 180 | |||||
| Soprema Inc. | Sopralene Flam 250 | |||||
| Soprema Inc. | Sopraply Base 520 |
- Cap Membranes
| Manufacturer | Product Name | Nominal Product Thickness (mm) | Approximate Weight (Kg/m2) | Reinforcement Material | Reinforcement Material Weight (g/m2) | Applicator Training |
|---|---|---|---|---|---|---|
| Garland Canada Inc. | Stressply E FR Mineral | |||||
| Garland Canada Inc. | Stressply EUV | |||||
| Garland Canada Inc. | Stressply Plus FR Mineral | |||||
| Garland Canada Inc. | Stressply Mineral | |||||
| Garland Canada Inc. | Stressply IV | |||||
| Garland Canada Inc. | Stressply IV Plus | |||||
| Garland Canada Inc. | Stressply MAX | |||||
| Garland Canada Inc. | Biflex Cap | |||||
| IKO Industries Ltd.' | Torchflex TP-250 Cap | |||||
| IKO Industries Ltd.' | Torchflex TP-180 Cap | |||||
| Siplast | Teranap 431 (2m x 20m) | |||||
| Siplast | Teranap (1m x 8m) | |||||
| Soprema Inc. | Sopralene 180 SP 3.5 | |||||
| Soprema Inc. | Trafikrock | |||||
| Soprema Inc. | Sopralene Flam 180 (FR) GR | |||||
| Soprema Inc. | Sopralene Flam 250 (FR) GR | |||||
| Soprema Inc. | Sopraply Traffic Cap 560 | |||||
| Soprema Inc. | Antirock |
- Self-adhering Membranes
| Manufacturer | Product Name | Nominal Product Thickness (mm) | Approximate Weight (Kg/m2) | Reinforcement Material | Reinforcement Material Weight (g/m2) | Applicator Training |
|---|---|---|---|---|---|---|
| Soprema Inc. | Sopralene Flam Stick |