Difference between revisions of "Materials:POWERply 3PM"

Revision as of 16:55, 15 October 2019

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Tremco Ltd. Accepted for RoofStar Guarantee Program Date TBA Product Summary Developed specifically for use in Canada, the POWERply 3PM membrane is a prefabricated, granule surfaced weathering membrane consisting of a non-woven polyester reinforcement that is fully coated with an SBS modified bitumen. The top surface is covered with ceramic granules to provide a prefinished surface and weather protection. The underside is sanded to permit adhering to a variety of surfaces and to ensure ease of unrolling during application. POWERply 3PM is designed to be mopped in place in a two ply new or replacement roofing system over an approved base ply. It is accepted for use as the finishing ply when assembling a more conventional multi-ply roofing membrane in the POWERply 2PM/3PM cold-processed system. Installation Guidelines

Click below for the Technical Data Sheet (TBA).

@@ Line 13: / Line 13: @@
 ;'''Product Summary''': Developed specifically for use in Canada, the POWERply 3PM membrane is a prefabricated, granule surfaced weathering membrane consisting of a non-woven polyester reinforcement that is fully coated with an SBS modified bitumen. The top surface is covered with ceramic granules to provide a prefinished surface and weather protection. The underside is sanded to permit adhering to a variety of surfaces and to ensure ease of unrolling during application.
-:POWERply 3PM is designed to be mopped in place in a two ply new or replacement roofing system over an approved base ply.  It may also be used as the finishing ply when assembling a more conventional multi-ply roofing membrane, such as the POWERply 2PM/3PM cold-processed system.
+:POWERply 3PM is designed to be mopped in place in a two ply new or replacement roofing system over an approved base ply.  It is accepted for use as the finishing ply when assembling a more conventional multi-ply roofing membrane in the POWERply 2PM/3PM cold-processed system.
 ;:
 ;[[Tremco SBS Membrane Installation Guidelines|Installation Guidelines]]