Revision as of 14:59, 29 May 2024
| Notice to the Reader:
The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.
|
Manufacturer: Elevate Commercial Roofing Systems
- Accepted for RoofStar Guarantee Program
- April 2012
- Product Summary
- Elevate Commercial Roofing Systems ISOGARD HD Cover Board is a half-inch (12.7 mm) thick polyiso insulation designed for use as a cover board. It is a high density, closed-cell, polyisocyanurate foam core that has been manufactured with a coated glass facer. Elevate Commercial Roofing Systems ISOGARD HD Cover Board provides the highest thermal performance when compared to other half-inch roof cover boards.
- All Elevate Commercial Roofing Systems polyisocyanurate insulations use EPA accepted blowing agents. Elevate Commercial Roofing Systems ISOGARD HD Cover Board with ISOGARD™ Foam Technology incorporates a HCFC-free blowing agent that does not contribute to the depletion of the ozone (ODP-free).
- Elevate Commercial Roofing Systems ISOGARD HD Cover Board can be applied over existing roof surfaces and under adhered or mechanically attached Single Ply, Cold and Modified Bitumen systems applied in Multi-Purpose MB Cold Adhesive and SA Base with a torch applied cap.
- Note: ISOGARD HD Cover Board may only be used with Elevate Commercial Roofing Systems.
- COMPOSITION
- 1.1.1 Polyisocyanurate foam core that has been manufactured with a coated glass facer.
- DELIVERY, STORAGE AND HANDLING
- Keep insulation dry at all times.
- Elevate insulation above the deck or ground.
- Cover insulation with waterproof tarps.
- Combustible. Refer to MSDS for more information.
- Do not install over wet, damp or uneven substrates.
- STANDARDS AND APPROVALS
- Meets American Society for Testing and Materials: ASTM C1289.
- Underwriters Laboratories Classified.
- Factory Mutual Approved.
- MANUFACTURER’S SERVICES
- Applicator Training: Firestone offers contractor product training.
- Technical Service: Technical Representative’s are available for consultation and field training; owners, architects and engineers are assisted in the selection and proper use of materials by technical representatives.
- Specification / Drawings: Complete specifications and detail drawings are available upon request and on the Firestone website.
- EXECUTION
- Insulation shall be neatly fitted to all roof penetrations, projections and nailers. No more insulation shall be installed than can be covered with membrane and completed before the end of each day’s work or before the onset of inclement weather.
|
- Click below for the Technical Data Sheet.
Back to Accepted Materials
Home
