Template:Materials - Liquid Membrane Flashing Systems
Template:Materials - Liquid Membrane Flashing Systems
Revision as of 16:16, 25 April 2018 by James Klassen (talk | contribs)
- Note to Reader
- Liquid membrane flashing systems are manufactured from various bituminous and non-bituminous materials. These manufactured proprietary flashing systems are specifically designed for use to flash unusual roof penetration shapes or roof details that are difficult to flash with traditional membranes.
- Liquid membrane flashings are available as one or two part component systems that require reinforcement scrims for strength. To ensure quality installation, manufacturers’ proprietary application instructions must be strictly followed.
- 2-Part Component Systems
- For use with polyester reinforcement only.
| Manufacturer | Product / System Name | Description / Features | Applicator Training | Special Notes |
|---|---|---|---|---|
| Firestone Building Products | Ultraflash | Organo-silane compound paired with polyester scrim | See Manufacturer | Refer to Technical Data Sheet |
| Johns Manville Corporation | PermaFlash | MBR® Flashing Cement used with polyester reinforcement | See Manufacturer | Refer to Technical Data Sheet |
| Siplast | Parapro 123 Flashing Resin | 2-part resin available in summer and winter grades | See Manufacturer | Refer to Technical Data Sheet |
| Soprema Inc. | Alsan RS System | 2-part liquid paired with Alsan RS Fleece | See Manufacturer | Refer to Technical Data Sheet |
- Single-component Systems
- (NOTE: these flashing systems have limited application within the RoofStar Guarantee Program, and may be used on upstand angles, support junctions and joints that are typically well above the water plane. These materials may also be used as a coating on galvanized flashings and other strip-in flashings requiring a coating (see RoofStar Guarantee Standards for SBS-modified Bitumen Roof Assemblies, 12.4 Strip-in Flashings)
| Manufacturer | Product / System Name | Description / Features | Applicator Training | Special Notes |
|---|---|---|---|---|
| IKO Industries Ltd. | IKO MS Detail | single-component flashing | See Manufacturer | See notations on Material page |
| Polyglass USA, Inc. | Polyflash 1C | single-component moisture-cured | See Manufacturer | To be used only with Polyglass membranes |
| Soprema Inc. | Alsan Flashing | Single component polyurethane/bitumen coating | See Manufacturer | See notations on Material page |