Manufacturers:Polyglass USA, Inc.

The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise.

Manufacturer: Polyglass USA, Inc. Website http://www.polyglass.com Contact Address See the current Membership list and contact information at www.rcabc.org

Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category

Materials shown with "TA" after the name have been used in wind-resistant Tested Assemblies. See also Securing the Roof Assembly and links to MARS, PARS and AARS material tables.

Waterproofing System Materials

Roofs

Insulation

Polyisocyanurate Foam

Polytherm G - conditional approval; call for information

Insulation Overlay Board

Asphaltic

Polyboard E (4.5 and 6 mm) - conditional approval; call for information

Polyboard W (4.5 mm) - conditional approval; call for information

SBS Membranes

Base Membranes

Elastobase (TA)

Elastoflex 25 - conditional approval; call for information

Elastoflex SA 2.5

Elastoflex S6 2.2 (S/S, P/S, P/P)

Elastoflex S6 2.5 (S/S, P/S) (TA)

Elastoflex S6 3.0 (P/P) (TA)

Elastoflex V (TA)

Elastoflex SA

Elastoflex SA V (TA)

Elastoflex SA V FR (TA)

Elastoflex S6 HP - conditional approval; call for information

Elastoflex SA V Plus - conditional approval; call for information

Elastoflex SA V Plus FR - conditional approval; call for information

Elastovent - conditional approval; call for information

Roofs cont.

Cap Membranes

Elastoflex S6 G (TA)

Elastoflex S6 G FR (TA)

Elastoflex SA P

Elastoflex SA P FR

Elastoflex S6 G C HP (250)

Elastoflex S6 G C HP FR (250)

Elastoflex SA P Polar Cap - conditional approval; call for information

Elastoshield TS G FR (TA)

Polyfresko G (TA)

Polyfresko G FR (TA)

Accessories

PG 350

Liquid Membrane Flashing

Single-component Liquid Membrane Flashing

Polyflash 1C

Water-shedding System Materials

Eave Protection & Underlayment (Shakes & Shingles)

Polystick IR-Xe

Polystick MTS

Polystick TU Plus

Eave Protection & Underlayment (ASM)

Polystick MTS

Accessories

An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the water or wind resistance of the roofing or waterproofing assembly. Accessories are not currently part of the Accepted Material program, but are listed here for reference to specifiers, designers and installers.

Miscellaneous

Membranes

Membranes

Back to Materials by Manufacturer/Distributor/Certifying Authority

Back to Accepted Materials

Home