ASM Roof System Details
ASM Roof System Details
- Division D - Construction Details
- Construction Details for ASM Roof Systems
- The drawings linked on this page are intended to represent a variety of SBS-modified Bitumen Membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers’ specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about Architectural Sheet Metal (ASM) system designs and requirements, see the Standard for ASM (Architectural Sheet Metal) Systems.
NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.
1 GENERAL
2 SUPPORTING STRUCTURES: Decks and Walls
3 SECURING the ROOF ASSEMBLY
4 MATERIALS
5 DECK and WALL OVERLAYS
6 AIR & VAPOUR CONTROLS
7 INSULATION
8 EAVE PROTECTION, UNDERLAYMENTS and DRAINAGE
9 PANELS
10 PERIMETER and VALLEY FLASHING
- ASM 10.1.1 Eave and Rake Flashing (Mechanical Seam)
- ASM 10.1.2 Eave and Rake Flashing (Snap Seam)
- ASM 10.1.3 Eave and Rake Flashing (Copper)
- ASM 10.1.4 Eave and Rake Flashing (Zinc)
11 PENETRATIONS and CURBS
12 OTHER DETAILS (Snow Guards, Built-in Gutters)
© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.