Waterproofing Systems (Roofs): Liquid Membrane Flashing Systems
Waterproofing Systems (Roofs): Liquid Membrane Flashing Systems
ACCEPTED PRODUCTS AND SYSTEMS FOR ROOFSTAR FIVE (5) YEAR, ROOFSTAR TEN (10) YEAR, AND ROOFSTAR FIVE (5) YEAR WATERPROOFING GUARANTEES.
The table or tables shown below provide basic material data and links to more information about the materials, including manufacturers' published Technical Data sheets, but this information not intended for use as a comparison of material performance or quality. It is the sole responsiblity of the design authority to assess the performance capability and material suitability for specific design requirements. The materials listed are those which have been accepted by the RCABC Guarantee Corp. (RGC) upon application by the manufacturer/supplier, in compliance with RGC Policy A-041, and are materials for which RoofStar Guarantee Certificates are available. The acceptance of these materials in no way reflects on the quality or performance of other materials not listed. The materials and guideline specifications are listed under the name of the manufacturer and/or supplier of the primary membrane material; except that RGC has issued the guidelines on traditional built-up roofing systems (BUR) incorporating organic and glass felt primary membranes. |
- Note to Reader
- Liquid membrane flashing systems are manufactured from various bituminous and non-bituminous materials. These manufactured proprietary flashing systems are specifically designed for use to flash unusual roof penetration shapes or roof details that are difficult to flash with traditional membranes.
- Liquid membrane flashings are available as one or two part component systems that require reinforcement scrims for strength. To ensure quality installation, manufacturers’ proprietary application instructions must be strictly followed.
- 2-Part Component Systems
- For use with fabric reinforcement only (refer to product Technical Data Sheet for proprietary reinforcement materials). These systems may be used on or within 200 mm (8") of the water plane.
Manufacturer | Product / System Name | Description / Features | Applicator Training | Special Notes |
---|---|---|---|---|
Elevate (fomerly Firestone) | Ultraflash | Organo-silane compound paired with polyester scrim | See Manufacturer | Refer to Technical Data Sheet |
Henry Company Canada | Pumadeq Flex 31MV | Catalyzed polyurethane methyl methacrylate used with N-Fleece fabric reinforcement | See Manufacturer | Refer to Technical Data Sheet |
IKO Industries Ltd. | Metatech Flashing | Catalyzed polyurethane methyl methacrylate used with N-Fleece fabric reinforcement | See Manufacturer | Refer to Technical Data Sheet |
Johns Manville Corp. | PermaFlash | MBR® Flashing Cement used with polyester reinforcement | See Manufacturer | Refer to Technical Data Sheet |
Siplast, Inc. | Parapro 123 Flashing Resin | 2-part resin available in summer and winter grades | See Manufacturer | Refer to Technical Data Sheet |
Soprema Inc. | Alsan RS System | 2-part liquid paired with Alsan RS Fleece | See Manufacturer | Refer to Technical Data Sheet |
- Single-component Systems
- (NOTE: these flashing systems have limited application within the RoofStar Guarantee Program, and may be used on upstand angles, support junctions and joints that are typically more than 200 mm (8") above water plane. These materials may also be used as a coating on galvanized flashings and other strip-in flashings requiring a coating (see RoofStar Guarantee Standards for SBS-modified Bitumen Roof Assemblies, 12.4 Strip-in Flashings)
Manufacturer | Product / System Name | Description / Features | Applicator Training | Special Notes |
---|---|---|---|---|
IKO Industries Ltd. | MS Detail | single-component flashing | See Manufacturer | See notations on Material page |
Polyglass USA, Inc. | Polyflash 1C | single-component moisture-cured | See Manufacturer | To be used only with Polyglass membranes |
Soprema Inc. | Alsan Flashing | Single component polyurethane/bitumen coating | See Manufacturer | See notations on Material page |