Grade-level Waterproofing System Details

Construction Details for Grade-level Waterproofing Systems

The drawings linked on this page are intended to represent a variety of SBS-modified Bitumen Membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers’ specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.

For further information about Grade-level Waterproofing system designs and requirements, see the Standard for Grade-level Waterproofing Systems.

NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.

F1.7.1 Wearing Course (Concrete Pavers)

F1.7.2 Wearing Course (Unit Masonry)

F1.7.3 Wearing Course (Concrete Slab)

F1.7.4 Steel Deck (Substrate Overlay Board)

F1.7.5 Expansion Joint (Deck Level)

F1.7.6 Walls (Planter Pre-Curb Wall)

F1.7.7 Walls (Low Door Sill)

F1.7.8 Walls (Window Curb & Flashings)

F1.7.9 Walls (Reglet & Counter-Flashings)

F1.7.10 Walls (Double Surface Reglet Flashing)

F1.7.11 Bi-Level Drain (Hard Surface: Low Pervious Wearing Course)

F1.7.12 Deck Drain (Unit Masonry on Pedestal Supports)

Standard for Grade-level Waterproofing Systems

Home

© RCABC 2024
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Grade-level Waterproofing System Details

Grade-level Waterproofing System Details

Accept Terms Of Use