Manufacturers:IKO Industries Ltd.

Jump to: navigation, search

Manufacturers:IKO Industries Ltd.

Revision as of 14:05, 28 June 2024 by James Klassen (talk | contribs) (SBS Polymer-Modified Bituminous Membranes (Cont.))




Division C - Accepted Materials


IKO Industries Ltd.
Associate Member (Manufacturer)

Materials Listed by Category


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website
http://www.iko.com/comm/
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
Canada
Country of Manufacture
Canada, U.S.A.
Year First Installed
BC:
Canada:
Foreign:
Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes


Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.

The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).

Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.

Waterproofing Roofs


Insulation

Polyisocyanurate Foam

IKOTherm III

Insulation Overlay Panels

Asphaltic Overlays

Protectoboard

High-density Insulation Overlays

IKOTherm Covershield

Composite and Membrane-laminated Overlays

Protectobase 180
Protectobase 180 Sanded
Protectobase 95
ShieldBase 180

Bitumen (BUR)

Modi-Melt SEBS

Felts (BUR)

Organic Felts

No. 15 Perforated Asphalt Felt

Glass-fibre Felts

Type IV Glass Ply Sheet
Type VI Glass Ply Sheet

SBS Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets

Armourbond Flash
Armourbond Flash HD
Armourbond 180
Armourbond Flash Sand HD
ArmourStick HD Base
Armourvent Base
Fast-N-Stick-180 Base
Fast-N-Stick HD Base
Modiflex HD-FS-Base
Modiflex HD-SS-Base
Modiflex MF-95 F/S
Modiflex MF-95 S/S
Modiflex MP-180 F/S 3 mm
Modiflex MP-180 F/S

Waterproofing at Grade


SBS-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets

Armourbridge/Pont
Armourbond Flash
Modiflex MP-180 F/S
Torchflex TF-95 FF
Torchflex TP-180 FF

Cap Sheets

Torchflex TP-250 Cap

Water-shedding Roofs


Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)

Mechanically Fastened Materials

Roofgard Cool Grey Underlayment
SBS Deck Base 44
Stormtite

Self-adhered Materials

Stormshield Ice and Water Protector
44 Stormshield
Armourgard Ice and Water Protector

Underlayment/Eave Protection (ASM)

Self-adhered Materials

Stormshield Ice and Water Protector
44 Stormshield
Armourgard Ice and Water Protector

Asphalt Shingles

Armourshake
Cambridge
Nordic (formerly Cambridge IR)
Dynasty
RoofShake HW
Royal Estate
Biltmore (CRC-labeled)

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.