Manufacturer: Soprema Inc.
- Accepted for RoofStar Guarantee Program
- Date TBA
- Product Summary
- The Alsan RS System includes the Accepted Materials Alsan RS 230 Flash and Alsan Flashing, which are complemented by:
- Alsan RS Fleece
- Alsan RS 276 Primer
- Alsan RS 222 Primer
- Alsan RS Catalyst Powder
- The Alsan Flashing is a waterproofing one-component polyurethane / bitumen coating. It is used for the upstands and roofing details where it is difficult to apply waterproofing membranes (example: complex upstands with numerous angles, hard to reach areas due to their narrowness or their environment, circular flashings, etc.).
- Alsan Flashing is ready to use. It is installed directly over traditional bituminous waterproofing or approved substrates. This liquid waterproofing process applies where torches are prohibited or dangerous (example: inflammable environments, skylight flashings, etc.).
- The Alsan Flashing has a 100 g/m², 150 mm (6") wide reinforcement that must be installed at all angles and joints between two supports.
- ALSAN FLASHING
- Definition
- Ready to use waterproofing, one component polyurethane / bitumen coating.
- Application
- Upstands and roof details.
- Presentation
- Thixotropic paste (mixing reduces the viscosity).
- Colour
- Brown
- Viscosity
- Brookfield at 25ºC 35 000 centipoises
- Solids Contents
- 80% ± 2%
- Flash Point
- 2.5ºC
- Format
- 19 litre container
- Inflammable
- Yes
- Covering Power
- 0.75 l/m² (19 litres covers 25m² (270 ft²))
- FLASHING REINFORCEMENT
- Definition
- Flexible reinforcement made of a woven 100 g/m² polyester.
- Application
- Upstand angles, support junctions and joints.
- Format
- 0.15 m (6") wide x 30.5 m (100 ft) long strip.
|
