Materials:Monolithic Membrane 6125 EV

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Hydrotech Membrane Corporation Accepted for RoofStar Guarantee Program June 2017 Product Summary MM6125EV is a hot-applied rubberized asphalt specially formulated from refined asphalts, synthetic rubber and inert clay filler. MM6125EV can be formulated with up to 25% post-consumer recycled content. The weight of the installed membrane is approximately 1.17 pounds per square foot for the 180 mils thick standard assembly. For the fabric reinforced assembly the weight of the installed membrane is approximately 1.4 pounds per square foot. The fabric reinforced assembly for waterproofing/roofing applications is required for the following conditions: Over extremely rough substrates Retrofit applications Over wood plank and plywood substrates Over gypsum board secured to metal deck substrates Over concrete block units Or, as otherwise directed by Hydrotech Installation Guidelines (TBA)

Click below for the Technical Data Sheet.