| Notice to the Reader:
The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.
|
Manufacturer: Tremco Ltd.
- Accepted for RoofStar Guarantee Program
- June 1988
- Product Summary
- THERM 100 is a built-up roofing system utilizing THERMastic, a proprietary eleastomeric hot melt adhesive and waterproofing compound for laminating fibreglass plies.
- Ancillary products (accepted only for use with the Therm 100 system):
- THERMglass asphalt glass felt plies (four plies, each installed in a full mopping of THERMastic.
- Cutback Primer (Tremprime Quick Dry)
- Mastics (ELS, Fibremat, Polyroof, Sheeting Bond and Tremlastic)
- BURmastic base sheet (coated cold-processed felt)
- Burmesh woven glass reinforcing membrane
- Flashing membrane (Tremco Elastomeric Sheeting or Tremco Polytherm)
- gravel (see the RPM for grade standards)
- BUR Installation Guidelines
|
- Click below for the Technical Data Sheet (TBA).
Back to Accepted Materials
Home
