Accepted Materials - TPO Membrane Systems

Jump to: navigation, search

Accepted Materials - TPO Membrane Systems

Revision as of 23:13, 22 November 2019 by James Klassen (talk | contribs) (→‎Fasteners & Accessories)
To view materials in any section listed below, click on the EXPAND button located at the right hand side of this page

1 Air and Vapour Control

The RCABC does not list air or vapour barriers in the Accepted Materials section of this Manual, as their performance is not guaranteed by the RoofStar Guarantee Program. For more about air and vapour barriers and specific requirements for the RoofStar Guarantee Program, select any of the Low Slope Membrane Roof Systems. This cross-reference is listed for information only.

2 Deck and Wall Overlays

Deck Overlays
Deck overlays are materials installed over decks to render the surface suitable for waterproofing materials. Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

* Use treated plywood over concrete deck surfaces
Manufacturer Product Name Product Type Thickness
mm (in.) 		Weight
(lb/square foot) 		Comp. Strength
(psi, nominal) 		Acceptable
Application
Plywood Plywood overlay 12.7 (1/2) min. Variable - All decks*
Georgia-Pacific Canada Ltd. DensDeck Roofboard Moisture-resistant gypsum core board 6.4 (1/4) 1.100 500-900 All decks
Georgia-Pacific Canada Ltd. DensDeck Roofboard Moisture-resistant gypsum core board 12.7 (1/2) 1.950 500-900 All decks
Georgia-Pacific Canada Ltd. DensDeck Roofboard Moisture-resistant gypsum core board 15.9 (5/8) 2.500 500-900 All decks
Georgia-Pacific Canada Ltd. DensDeck® Prime with EONIC Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.150 900 All decks
Georgia-Pacific Canada Ltd. DensDeck® Prime with EONIC Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 1.975 900 All decks
Georgia-Pacific Canada Ltd. DensDeck® Prime with EONIC Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 2.550 900 All decks
USG (CGC) SecureRock Securerock Glass-Mat Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.200 700-1000 All decks
USG (CGC) SecureRock Securerock Glass-Mat Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 2.000 700-1000 All decks
USG (CGC) SecureRock Securerock Glass-Mat Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 2.700 700-1000 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.570 1800 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 9.5 (3/8) 1.960 1800 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 2.760 1800 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 3.200 1800 All decks
USG (CGC) SecureRock Securerock Coated Ultralight Glass Mat Roof Board* 6.4 (1/4) 1.200 700-1000 700-1000 All decks
USG (CGC) SecureRock Securerock Coated Ultralight Glass Mat Roof Board* 12.7 (1/2) 1.700 700-1000 700-1000 All decks
USG (CGC) SecureRock Securerock Coated Ultralight Glass Mat Roof Board* 15.9 (5/8) 2.200 700-1000 700-1000 All decks
USG (CGC) SecureRock Securerock Ultralight Glass Mat Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.200 700-1000 All decks
USG (CGC) SecureRock Securerock Ultralight Glass Mat Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 1.700 700-1000 All decks
USG (CGC) SecureRock Securerock Ultralight Glass Mat Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 2.200 700-1000 All decks
* Indicates conditions of acceptance. See the product page for more information.
Wall Overlays TBA

3 Insulation

Composite Board Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa/25.4 mm) Compressive Strength (psi/1 in. thick) Thermal Resistance (RSI/25.4 mm) Thermal Resistance (R/inch)
Posi-Slope Western MF (Protect Board Composite) ‒ ‒ ‒ ‒ ‒ ‒
Soprema Inc. Xpress Board HD ‒ 200 190 (at 25%) 28 (at 25%) 0.70 K/W 4
Soprema Inc. Xpress ISO ‒ ‒ 138 (Polyiso only) 20 (Polyiso only) 1.0 5.7
XPS (Extruded Expanded Polystyrene Foam)
XPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
Dupont Specialty Products Division - Safety and Construction Deckmate (Type 2) ‒ ‒ 110 16 0.87 5
Dupont Specialty Products Division - Safety and Construction Deckmate Plus (Type 3) ‒ ‒ 140 20 0.87 5
Dupont Specialty Products Division - Safety and Construction Roofmate (Type 4) ‒ ‒ 240 35 0.87 5
Dupont Specialty Products Division - Safety and Construction Roofmate CT (Type 4) ‒ ‒ 240* 35* 0.87 5
Owens Corning Canada Foamular C200 (Type 3) ‒ ‒ 140 20 0.88 5
Owens Corning Canada Foamular F350 (Type 4) ‒ ‒ 240 35 0.88 5
Owens Corning Canada Foamular 400 (Type 4) ‒ ‒ 275 40 0.88 5
Owens Corning Canada Foamular 600 (Type 4) ‒ ‒ 415 60 0.88 5
Owens Corning Canada Foamular 1000 (Type 4) ‒ ‒ 690 100 0.88 5
Owens Corning Canada Foamular 404 (Type 4) ‒ ‒ 276 40 0.88 5
Owens Corning Canada Foamular 604 (Type 4) ‒ ‒ 414 60 0.88 5
Owens Corning Canada Foamular 404RB (Type 4) ‒ ‒ 276 40 0.84 4.75
Owens Corning Canada Foamular 604RB (Type 4) ‒ ‒ 414 60 0.84 4.75
Soprema Inc. Sopra-XPS 35 ‒ ‒ 350 51 0.88 5
Soprema Inc. Sopra-XPS 40, 60, 100 ‒ ‒ 500, 600, 700 73, 87, 102 0.88 5
EPS (Expanded Polystyrene Foam)
EPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind Uplift Resistance) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm)
@24°C (74°F) 		Thermal
Resistance
(R/inch)
@24°C (74°F)
Airfoam Industries Ltd. Korolite 100 (Type 1, Flat) ‒ 70 10 0.65 3.75
Airfoam Industries Ltd. Korolite 160 (Type 2, Flat) ‒ 110 16 0.7 4.04
Airfoam Industries Ltd. Korolite 250 (Type 3, Flat) ‒ 172 25 0.74 4.27
Airfoam Industries Ltd. Korolite 100 (Type 1, Tapered) ‒ 70 10 0.65 3.75
Airfoam Industries Ltd. Korolite 160 (Type 2, Tapered) ‒ 110 16 0.7 4.04
Airfoam Industries Ltd. Korolite 250 (Type 3, Tapered) ‒ 172 25 0.74 4.27
Beaver Plasticts Ltd. Terrafoam (Type 1, Flat) ‒ 70 10 0.65 3.75
Beaver Plasticts Ltd. Terrafoam (Type 2, Flat) ‒ 110 16 0.7 4.04
Beaver Plasticts Ltd. Terrafoam (Type 3, Flat) ‒ 140 20.4 0.74 4.27
Beaver Plasticts Ltd. Terrafoam (Type 1, Tapered) ‒ 70 10 0.65 3.75
Beaver Plasticts Ltd. Terrafoam (Type 2, Tapered) ‒ 110 16 0.7 4.04
Beaver Plasticts Ltd. Terrafoam (Type 3, Tapered) ‒ 140 20.4 0.74 4.27
Plasti-Fab Plastispan Insulation (Type 1) ‒ 70 10 0.65 3.75
Plasti-Fab Plastispan HD Insulation (Type 2) ‒ 110 16 0.7 4.04
Plasti-Fab Plastispan 25 Insulation (Type 3) ‒ 140 20 0.74 4.27
Plasti-Fab Plastispan Sloped Insulation ‒ ‒ ‒ ‒ ‒
Polyisocyanurate Foam
"Polyiso" Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/m3) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
Atlas Roofing Corporation AC Foam III ‒ 32 138 20 1 5.7
Atlas Roofing Corporation AC Foam Supreme ‒ 32 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield HD Plus MARS PARS ‒ 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield RapidLock (RL) Polyiso ‒ ‒ 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield RapidLock (RL) HD Polyiso ‒ ‒ 138 20 1 5.7
Elevate (fomerly Firestone) ISOGARD CG ‒ 32 138 20 1 5.7
Hunter Panels H-Shield CG ‒ 32 138 20 1 5.7
Hunter Panels H-Shield Premier ‒ 32 138 20 1 5.7
Hunter Panels H-Shield Composite ‒ 32 138 20 1 5.7
IKO Industries Ltd. IKOTherm III ‒ ‒ 140 20 1 5.7
Johns Manville Corporation ENRGY 3 CGF Insulation ‒ ‒ 138 20 1 5.7
Polyglass USA, Inc. Polytherm G ‒ 32.04 138 20 1 5.7
Siplast, Inc. Paratherm CG ‒ ‒ 138 20 1 5.7
Soprema Inc. Sopra-Iso Plus ‒ 32 138 20 1 5.7
Fibreboard Roof Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Description Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
IKO Industries Ltd. Asphalt Fibreboard ‒ Impregnated/Coated ‒ ‒ ‒ ‒ ‒
MSL Petroleum Paraffin Natural ‒ Natural Fibreboard ‒ ‒ ‒ ‒ ‒
MSL Petroleum Paraffin HD ‒ High Density Fibreboard ‒ ‒ ‒ ‒ ‒
MSL Asphalt Coated (6 sides) ‒ Asphalt Coated - 6 sides (Natural Fibreboard) ‒ ‒ ‒ ‒ ‒
MSL Asphalt and Wax Impregnated Fibreboard ‒ Asphalt and Wax-impregnated ‒ ‒ ‒ ‒ ‒
MSL Asphalt and Wax Impregnated HD ‒ Asphalt and Wax-impregnated HD ‒ ‒ ‒ ‒ ‒
MSL Securpan ‒ Fire-resistant fibreboard ‒ ‒ ‒ ‒ ‒
MSL Securpan (asphalt coated) ‒ Asphalt-coated on 1 side / fire-resistant ‒ ‒ ‒ ‒ ‒
Perlitic Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
Johns Manville Corporation Fesco Board ‒ ‒ ‒ ‒ 0.49 2.78
Mineral Fibre Roof Insulation
Mineral Fibre Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
ROCKWOOL TOPROCK® DD ‒ See TDS See TDS See TDS 0.62 3.5
ROCKWOOL TOPROCK® DD PLUS ‒ See TDS See TDS See TDS 0.62 3.5
ROCKWOOL MULTIFIX TM ‒ See TDS See TDS See TDS 0.68 3.8
Soprema Inc. Soprarock DD ‒ See TDS See TDS See TDS 0.62 3.5
Soprema Inc. Soprarock DD PLUS ‒ See TDS See TDS See TDS 0.62 3.5
Soprema Inc. Soprarock MD ‒ See TDS See TDS See TDS See TDS See TDS
Soprema Inc. Soprarock MD Plus ‒ See TDS See TDS See TDS See TDS See TDS
Lightweight Insulating Concrete
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
Siplast NVS Concrete ‒ 560 2070 300 N/A N/A
Siplast INSULCEL Concrete ‒ 480 1380 200 N/A N/A

4 Insulation Overlays

Fibreboard Overlays
Template:Materials - Insulation Overlay (Fibreboard)
Composite Overlays
Template:Materials - Insulation Overlay (Composite Board)

5 Membranes

TPO
Template:Materials - TPO Membranes

6 Drains, Penetration Flashings and Related Accessories

Drains
Internal flange-type roof drains
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Available Sizes - mm (in.) Material Gauge or Weight - Kg (lb.)
Menzies Metal Products Clamp-Tite Flat Top Drain (Aluminum) 50, 75, 100 (2, 3, 4) Aluminum 1.52, 1.61, 1.70 (3.35, 3.55, 3.75)
Menzies Metal Products Clamp-Tite Spun Drain (Aluminum or Copper) 50, 75, 100, 150 (2, 3, 4, 6) Aluminum, Copper 1.83, 2.15, 2.75, 3.20 (4.03, 4.72, 6.05, 7.05)
Menzies Metal Products Commercial Undersize Drain (Aluminum) 50, 75, 100 (2, 3, 4) Aluminum Inquire with Manufacturer
Menzies Metal Products Commercial Spun Drain 50, 75, 100 (2, 3, 4) Copper Inquire with Manufacturer
Platinum Roofing Products Ltd. Premium Copper Retrofit Drains Various; inquire with Manufacturer Copper Inquire with Manufacturer
Platinum Roofing Products Ltd. Premium Copper New Construction Roof Drains Various; inquire with Manufacturer Copper Inquire with Manufacturer
Platinum Roofing Products Ltd. Premium Aluminum Retrofit Drains Various; inquire with Manufacturer Aluminum Inquire with Manufacturer
Platinum Roofing Products Ltd. Premium Aluminum New Construction Roof Drains Various; inquire with Manufacturer Aluminum Inquire with Manufacturer
Precision Metals Ltd. Spun Copper Drain Various; inquire with Manufacturer Copper 3.3 (1.5)
Precision Metals Ltd. Spun Aluminum Drain Various; inquire with Manufacturer Aluminum Inquire with Manufacturer
Precision Metals Ltd. Spun Copper Drain (Clamping) Various; inquire with Manufacturer Copper 3.3 (1.5)
Precision Metals Ltd. Spun Aluminum Drain (Clamping) Various; inquire with Manufacturer Aluminum Inquire with Manufacturer
External flange-type roof drains
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Available Sizes - mm (in.) Material Gauge or Weight - Kg (lb.)
Menzies Metal Products Econo Drain 50, 75, 100 (2, 3, 4) Copper N/A
Menzies Metal Products Spun Aluminum Value Drain 50, 75, 100 (2, 3, 4) Aluminum N/A
Menzies Metal Products Spun Copper Deck Drain 50, 75 (2, 3) Copper See Technical Data Sheet
Precision Metals Ltd. Copper Hot-welded Drain 50, 75, 100 (2, 3, 4) Copper 2.2, 3.3 (1, 1.5)
Scupper and Overflow Drains
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Available Sizes - mm (in.) Material Gauge or Weight - Kg (lb.)
Menzies Metal Products Clamp-Tite Box Scupper 75 (3) Copper 2.02 (4.45)
Menzies Metal Products Clamp-Tite Overflow Scupper 75 (3) Copper 0.95 (2.1)
Menzies Metal Products Econo Copper Box Scupper 50, 75 (2, 3) Copper 0.57, 0.59 (1.25, 1.30)
Precision Metals Ltd. Copper Scupper (Open top) 50, 75 (2, 3) Copper Inquire with Manufacturer
Penetration Flashings
Galvanized Penetration Flashings
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Available Sizes - mm (in.) Material Gauge or Weight - Kg (lb.)
Menzies Metal Products BUR Vent 150x150, 200x200, 300x300, 125x350 (6x6, 8x8, 12x12, 5x14) Galvanized Steel 26-Gauge
Menzies Metal Products BUR Flat Top Vent 350x350 (14x14) Galvanized Steel 26-Gauge
Menzies Metal Products B-Vent 100 to 300 (4 to 12) diam. Galvanized Steel Inquire with Manufacturer
Menzies Metal Products Electrical Retrofit Box One Size Galvanized Steel Inquire with Manufacturer
Menzies Metal Products Gas Retrofit Box One Size Galvanized Steel Inquire with Manufacturer
Menzies Metal Products SL5000 Bath/Dryer Vent Flashing 225x500 (9x20) Galvanized Steel Inquire with Manufacturer
Precision Metals Ltd. Hot-welded B-vent (Flat) 100, 125, 150, 175, 200 (4, 5, 6, 7, 8) Galvanized Steel 26-Gauge
Precision Metals Ltd. Gooseneck Vent 200 (8) opening; 187.5 (7.5) high Galvanized Steel 26-Gauge
Precision Metals Ltd. PRT Bath/Dryer/Stove Vent 100, 125, 150, 200, 250 (4, 5, 6, 8, 10) opening Galvanized Steel 26-Gauge
Precision Metals Ltd. B.U.R. Vent 150x150, 200x200, 300x300, 600x600 (6x6, 8x8, 14x14, 12x12, 24x24) Galvanized Steel 26-Gauge
Aluminium and Copper Penetration Flashings
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Available Sizes - mm (in.) Material Gauge or Weight - Kg (lb.)
Menzies Metal Products B-Vent (Spun Aluminum) 100 to 300 (4 to 12) diam. Aluminum Inquire with Manufacturer
Menzies Metal Products Plumbing Stack (Spun Aluminum) 37.5, 50, 75, 100, 125
(1-1/2, 2, 3, 4, 5)		 Aluminum Inquire with Manufacturer
Menzies Metal Products Plumbing Stack (Welded Aluminum) 31.25, 37.5, 50, 75, 100, 125, 150
(1-1/4, 1-1/2, 2, 3, 4, 5, 6)		 Aluminum Inquire with Manufacturer
Menzies Metal Products Electrical Roof Flashing (Welded Aluminum) One Size Aluminum Inquire with Manufacturer
Platinum Roofing Products Ltd. Platinum Vent Stack (Aluminum) Various; inquire with manufacturer Aluminum Inquire with Manufacturer
Platinum Roofing Products Ltd. Insulated Platinum Vent Stack (Aluminum) Various; inquire with manufacturer Aluminum Inquire with Manufacturer
Precision Metals Ltd. Aluminum Stack (Pipe flashing) 31.25 to 125 (1.25 to 5) Stack size Aluminum Inquire with Manufacturer
Precision Metals Ltd. Aluminum Stack Cap (Standard) Various (see TDS) Aluminum Inquire with Manufacturer
Precision Metals Ltd. Aluminum Stack Cap (Anti-vandal) 31.25 to 125 (1.25 to 5) Stack size Aluminum Inquire with Manufacturer

7 Fasteners & Accessories

An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the waterproofing or water-shedding capabilities of the system.

Accessories are not currently part of the Accepted Material program, but are listed here for reference to specifiers, designers and installers.

These membranes are not Accepted for use in the primary waterproofing system, but may be use as for an ancillary function - for example, as protective membranes (a 'sacrificial' cap membrane).

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Description Application Method Suitability
Polyglass USA, Inc. Polyfresko G SA APP membrane Self-adhering Walkways, accessory surfaces
Polyglass USA, Inc. Polyfresko G FR APP membrane (fire resistant) Heat-welding Walkways, accessory surfaces
Polyglass USA, Inc. Polyfresko G APP membrane Heat-welding, hot asphalt, cold processing Walkways, accessory surfaces
Polyglass USA, Inc. Polyflex G FR APP membrane (fire resistant) Heat-welding Walkways, accessory surfaces
Polyglass USA, Inc. Polyflex G HP APP membrane Heat-welding, hot asphalt, cold processing Walkways, accessory surfaces

Coatings are not a waterproofing product, but rather enhance solar reflectivity or other properties of a membrane. The inclusion of these materials, although acceptable under the RoofStar Guarantee Program, is not part of the Guarantee.

Click on a manufacturer's name to see the full list of their products listed for use in the RoofStar Guarantee Program
Manufacturer Product Name Description Application Applicator Training
Soprema Inc. R-Nova Plus polyurethane/acrylic-based waterproofing liquid membrane/coating See Product Details Consult Manufacturer
Soprema Inc. R-Nova Plus Mastic polyurethane/acrylic-based waterproofing liquid mastic See Product Details Consult Manufacturer
Soprema Inc. R-Nova Plus Matrix polyurethane/acrylic-based waterproofing liquid paste See Product Details Consult Manufacturer
Click on a manufacturer's name to see the full list of their products listed for use in the RoofStar Guarantee Program
Manufacturer Product Name Type Size
Soprema Inc. Soprajoint Plus 20 expansion joint for low-slope membrane systems ‒
Soprema Inc. Soprajoint Plus 40 expansion joint for low-slope membrane systems ‒
Soprema Inc. Soprajoint Plus 75 expansion joint for low-slope membrane systems ‒
Soprema Inc. Soprajoint Plus 125 expansion joint for low-slope membrane systems ‒


TPO Membrane Systems

Accepted Materials

TPO/PVC Application Guides and Notes

Retrieved from "http://rpm.rcabc.org/index.php?title=Accepted_Materials_-_TPO_Membrane_Systems&oldid=22853"