Materials:Multi-Flash Insulated Pipe Flashing

Jump to: navigation, search

Materials:Multi-Flash Insulated Pipe Flashing

Revision as of 16:55, 20 February 2020 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Menzies Metal Products
Accepted for RoofStar Guarantee Program
February 2020
Product Summary
  • Designed as a "one-size-fits-all" seamless plumbing stack flashing
  • manufactured with two seals
  • Accepted for use on a RoofStar-guaranteed roof only when the following additional measures are taken:
  1. the 5-in-1 cap is sealed at the top edge, and is clamped with a suitable band clamp;
  2. the 5-in-1 cap is protected by a storm collar installed directly above it (follow the application standards for B-vent flashings)
Click below for the Technical Data Sheet.
Technical Data Sheet


Back to Accepted Materials

Home

Retrieved from "http://rpm.rcabc.org/index.php?title=Materials:Multi-Flash_Insulated_Pipe_Flashing&oldid=23785"