Template:Materials - Hot Fluid-applied Rubberized Asphalt (Roofs)
Template:Materials - Hot Fluid-applied Rubberized Asphalt (Roofs)
Revision as of 16:12, 10 February 2021 by James Klassen (talk | contribs) (James Klassen moved page Template:Materials - Hot-applied Rubberized Asphalt Roofing to Template:Materials - Hot Fluid-applied Rubberized Asphalt Roofing)
- These are fully adhered waterproofing system that utilize hot applied rubberized asphalt compounds, with reinforcement scrims, to form monolithic (seamless) flexible waterproofing membranes.
- Composition
- These Accepted Materials consist of single component rubberized asphalt compound installed with reinforcement between two a two layer system. Hot applied rubberized asphalt is fully-adhered to both vertical and horizontal structural surfaces to form monolithic (seamless) flexible waterproofing membrane. Reinforced membrane flashings are installed in Hot applied rubberized asphalt at all transitions (for example, at wall to deck plane changes).
- Hot applied rubberized asphalt systems are used only in a Protected Membrane Roof Assembly (PMRA).
| Manufacturer | Product Name | Nominal Product Thickness (mm) |
Approximate Weight (Kg/m2) | Reinforcement Material | Reinforcement Material Weight (g/m2) |
Applicator Training |
|---|---|---|---|---|---|---|
| Hydrotech Membrane Corporation | Monolithic Membrane 6125 | See Standards | - | spun polyester | 1.3 oz. per yard2 | Consult manufacturer |
| Henry Company Canada | 790-11 Hot Rubberized Asphalt | See Standards | 3.54 @ 3 mm | spun polyester | ‒ | Consult manufacturer |