Materials:JM reinforced EPDM

Jump to: navigation, search

Materials:JM reinforced EPDM

Revision as of 22:06, 28 July 2021 by James Klassen (talk | contribs) (James Klassen moved page Materials:JM reinforced EPDM Membrane to Materials:JM reinforced EPDM)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Johns Manville Corporation
Accepted for RoofStar Guarantee Program
2007
Product Summary
A cured EPDM membrane reinforced with a denier polyester mat, it may be installed loose-laid under ballast, fully adhered, or mechanically fastened.
Installation Guidelines
Click below for the Technical Data Sheet
Technical Data Sheet (45 mil)
1.11 mm (45 mil) Membrane TDS
Technical Data Sheet (60 mil)
1.52 mm (60 mil) Membrane TDS

Back to Accepted Materials


Home

Retrieved from "http://rpm.rcabc.org/index.php?title=Materials:JM_reinforced_EPDM&oldid=30691"