Architectural Sheet Metal (ASM) Systems
Architectural Sheet Metal (ASM) Systems
Revision as of 16:00, 2 September 2021 by James Klassen (talk | contribs)
- Introduction
- Definition and Terms
- Standard for Architectural Sheet Metal (ASM) Systems
- 1 GENERAL
- 2 SUPPORTING STRUCTURES: Decks and Walls
- 3 SECURING the ROOF ASSEMBLY
- 4 MATERIALS
- 5 DECK and WALL OVERLAYS
- 6 AIR and VAPOUR CONTROLS
- 7 INSULATION
- 8 EAVE PROTECTION, UNDERLAYMENTS and DRAINAGE
- 9 PANELS
- 10 PERIMETERS and WALLS
- 11 DRAINAGE and PENETRATIONS
- 12 OTHER DETAILS
- 13 METAL FLASHINGS
- 14 NOT USED
- Accepted Materials
- ASM Construction Details
© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.