(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Division C - Accepted Materials
SlopeShield Plus Self-Adhered
by VaproShield LLC
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- VaproShield LLC
- Accepted for the RoofStar Guarantee Program
- January 19, 2024
- Accepted for application in
- Water-shedding Roof Systems
- Acceptance Criteria
- None
- Product Summary
- SlopeShield Plus Self-Adhered consists of a spun-bond polyester fabric with proprietary coatings on the top and underside utilizing. The top coating is slip resistant and UV-stable. The underside is a fully self-adhered adhesive protected by a siliconized release film, which is removed during installation.
- SlopeShield Plus Self-Adhered is a vapour-permeable product that may be installed on water-shedding roof slopes equal to or greater than 2:12 (9.46 degrees). Alternative uses include low slope roofs below 2:12 (9.46 degrees) and mass timber moisture protection. See corresponding data sheets.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- See Part 8 in the Water-shedding Standards (Division B).
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
