Materials:SlopeShield Plus Self-Adhered

Jump to: navigation, search

Materials:SlopeShield Plus Self-Adhered

Division C - Accepted Materials

SlopeShield Plus Self-Adhered
by VaproShield LLC

Material Acceptance and Product Details

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

VaproShield LLC
Accepted for the RoofStar Guarantee Program
January 19, 2024
Accepted for application in
Water-shedding Roof Systems
Acceptance Criteria
Product Summary
SlopeShield Plus Self-Adhered consists of a spun-bond polyester fabric with proprietary coatings on the top and underside utilizing. The top coating is slip resistant and UV-stable. The underside is a fully self-adhered adhesive protected by a siliconized release film, which is removed during installation.
SlopeShield Plus Self-Adhered is a vapour-permeable product that may be installed on water-shedding roof slopes equal to or greater than 2:12 (9.46 degrees). Alternative uses include low slope roofs below 2:12 (9.46 degrees) and mass timber moisture protection. See corresponding data sheets.
(adapted from the Technical Data Sheet)
Conditions and Limitations
See Part 8 in the Water-shedding Standards (Division B).
Technical Data Sheet
Click the "PDF" icon to open the TDS in a new window.
Technical Data Sheet

Back to Accepted Materials